just now only spinand on_die ecc is supported
Signed-off-by: Mikhail Kshevetskiy mikhail.kshevetskiy@iopsys.eu --- drivers/mtd/nand/Makefile | 2 +- drivers/mtd/nand/core.c | 130 +++++++++++++++- drivers/mtd/nand/ecc.c | 150 ++++++++++++++++++ drivers/mtd/nand/spi/core.c | 206 ++++++++++++++++++++----- drivers/mtd/nand/spi/macronix.c | 7 +- drivers/mtd/nand/spi/micron.c | 2 +- drivers/mtd/nand/spi/toshiba.c | 10 +- drivers/mtd/nand/spi/winbond.c | 10 +- include/linux/mtd/nand.h | 260 ++++++++++++++++++++++++++++++-- include/linux/mtd/spinand.h | 13 +- include/spi-mem.h | 2 + 11 files changed, 724 insertions(+), 68 deletions(-) create mode 100644 drivers/mtd/nand/ecc.c
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 96e186600a1..56179188e92 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+
ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) -nandcore-objs := core.o bbt.o +nandcore-objs := core.o bbt.o ecc.o obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o obj-$(CONFIG_MTD_RAW_NAND) += raw/ obj-$(CONFIG_MTD_SPI_NAND) += spi/ diff --git a/drivers/mtd/nand/core.c b/drivers/mtd/nand/core.c index f6d9c584f78..62bbc12c662 100644 --- a/drivers/mtd/nand/core.c +++ b/drivers/mtd/nand/core.c @@ -130,7 +130,7 @@ EXPORT_SYMBOL_GPL(nanddev_isreserved); * * Return: 0 in case of success, a negative error code otherwise. */ -static int nanddev_erase(struct nand_device *nand, const struct nand_pos *pos) +int nanddev_erase(struct nand_device *nand, const struct nand_pos *pos) { unsigned int entry;
@@ -188,6 +188,134 @@ int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo) } EXPORT_SYMBOL_GPL(nanddev_mtd_erase);
+/** + * nanddev_get_ecc_engine() - Find and get a suitable ECC engine + * @nand: NAND device + */ +static int nanddev_get_ecc_engine(struct nand_device *nand) +{ + int engine_type; + + /* Read the user desires in terms of ECC engine/configuration */ + of_get_nand_ecc_user_config(nand); + + engine_type = nand->ecc.user_conf.engine_type; + if (engine_type == NAND_ECC_ENGINE_TYPE_INVALID) + engine_type = nand->ecc.defaults.engine_type; + + switch (engine_type) { + case NAND_ECC_ENGINE_TYPE_NONE: + return 0; + case NAND_ECC_ENGINE_TYPE_SOFT: + nand->ecc.engine = nand_ecc_get_sw_engine(nand); + break; + case NAND_ECC_ENGINE_TYPE_ON_DIE: + nand->ecc.engine = nand_ecc_get_on_die_hw_engine(nand); + break; + case NAND_ECC_ENGINE_TYPE_ON_HOST: + nand->ecc.engine = nand_ecc_get_on_host_hw_engine(nand); + if (PTR_ERR(nand->ecc.engine) == -EPROBE_DEFER) + return -EPROBE_DEFER; + break; + default: + pr_err("Missing ECC engine type\n"); + } + + if (!nand->ecc.engine) + return -EINVAL; + + return 0; +} + +/** + * nanddev_put_ecc_engine() - Dettach and put the in-use ECC engine + * @nand: NAND device + */ +static int nanddev_put_ecc_engine(struct nand_device *nand) +{ + switch (nand->ecc.ctx.conf.engine_type) { + case NAND_ECC_ENGINE_TYPE_ON_HOST: + nand_ecc_put_on_host_hw_engine(nand); + break; + case NAND_ECC_ENGINE_TYPE_NONE: + case NAND_ECC_ENGINE_TYPE_SOFT: + case NAND_ECC_ENGINE_TYPE_ON_DIE: + default: + break; + } + + return 0; +} + +/** + * nanddev_find_ecc_configuration() - Find a suitable ECC configuration + * @nand: NAND device + */ +static int nanddev_find_ecc_configuration(struct nand_device *nand) +{ + int ret; + + if (!nand->ecc.engine) + return -ENOTSUPP; + + ret = nand_ecc_init_ctx(nand); + if (ret) + return ret; + + if (!nand_ecc_is_strong_enough(nand)) + pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n", + nand->mtd->name); + + return 0; +} + +/** + * nanddev_ecc_engine_init() - Initialize an ECC engine for the chip + * @nand: NAND device + */ +int nanddev_ecc_engine_init(struct nand_device *nand) +{ + int ret; + + /* Look for the ECC engine to use */ + ret = nanddev_get_ecc_engine(nand); + if (ret) { + if (ret != -EPROBE_DEFER) + pr_err("No ECC engine found\n"); + + return ret; + } + + /* No ECC engine requested */ + if (!nand->ecc.engine) + return 0; + + /* Configure the engine: balance user input and chip requirements */ + ret = nanddev_find_ecc_configuration(nand); + if (ret) { + pr_err("No suitable ECC configuration\n"); + nanddev_put_ecc_engine(nand); + + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(nanddev_ecc_engine_init); + +/** + * nanddev_ecc_engine_cleanup() - Cleanup ECC engine initializations + * @nand: NAND device + */ +void nanddev_ecc_engine_cleanup(struct nand_device *nand) +{ + if (nand->ecc.engine) + nand_ecc_cleanup_ctx(nand); + + nanddev_put_ecc_engine(nand); +} +EXPORT_SYMBOL_GPL(nanddev_ecc_engine_cleanup); + /** * nanddev_init() - Initialize a NAND device * @nand: NAND device diff --git a/drivers/mtd/nand/ecc.c b/drivers/mtd/nand/ecc.c new file mode 100644 index 00000000000..7c86e9871ad --- /dev/null +++ b/drivers/mtd/nand/ecc.c @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#ifndef __UBOOT__ +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#endif +#include <linux/mtd/nand.h> + +/** + * nand_ecc_init_ctx - Init the ECC engine context + * @nand: the NAND device + * + * On success, the caller is responsible of calling @nand_ecc_cleanup_ctx(). + */ +int nand_ecc_init_ctx(struct nand_device *nand) +{ + if (!nand->ecc.engine || !nand->ecc.engine->ops->init_ctx) + return 0; + + return nand->ecc.engine->ops->init_ctx(nand); +} +EXPORT_SYMBOL(nand_ecc_init_ctx); + +/** + * nand_ecc_cleanup_ctx - Cleanup the ECC engine context + * @nand: the NAND device + */ +void nand_ecc_cleanup_ctx(struct nand_device *nand) +{ + if (nand->ecc.engine && nand->ecc.engine->ops->cleanup_ctx) + nand->ecc.engine->ops->cleanup_ctx(nand); +} +EXPORT_SYMBOL(nand_ecc_cleanup_ctx); + +/** + * nand_ecc_prepare_io_req - Prepare an I/O request + * @nand: the NAND device + * @req: the I/O request + */ +int nand_ecc_prepare_io_req(struct nand_device *nand, + struct nand_page_io_req *req) +{ + if (!nand->ecc.engine || !nand->ecc.engine->ops->prepare_io_req) + return 0; + + return nand->ecc.engine->ops->prepare_io_req(nand, req); +} +EXPORT_SYMBOL(nand_ecc_prepare_io_req); + +/** + * nand_ecc_finish_io_req - Finish an I/O request + * @nand: the NAND device + * @req: the I/O request + */ +int nand_ecc_finish_io_req(struct nand_device *nand, + struct nand_page_io_req *req) +{ + if (!nand->ecc.engine || !nand->ecc.engine->ops->finish_io_req) + return 0; + + return nand->ecc.engine->ops->finish_io_req(nand, req); +} +EXPORT_SYMBOL(nand_ecc_finish_io_req); + +void of_get_nand_ecc_user_config(struct nand_device *nand) +{ + nand->ecc.user_conf.engine_type = NAND_ECC_ENGINE_TYPE_ON_DIE; + nand->ecc.user_conf.algo = NAND_ECC_ALGO_UNKNOWN; + nand->ecc.user_conf.placement = NAND_ECC_PLACEMENT_UNKNOWN; +} +EXPORT_SYMBOL(of_get_nand_ecc_user_config); + +/** + * nand_ecc_is_strong_enough - Check if the chip configuration meets the + * datasheet requirements. + * + * @nand: Device to check + * + * If our configuration corrects A bits per B bytes and the minimum + * required correction level is X bits per Y bytes, then we must ensure + * both of the following are true: + * + * (1) A / B >= X / Y + * (2) A >= X + * + * Requirement (1) ensures we can correct for the required bitflip density. + * Requirement (2) ensures we can correct even when all bitflips are clumped + * in the same sector. + */ +bool nand_ecc_is_strong_enough(struct nand_device *nand) +{ + const struct nand_ecc_props *reqs = nanddev_get_ecc_requirements(nand); + const struct nand_ecc_props *conf = nanddev_get_ecc_conf(nand); + struct mtd_info *mtd = nanddev_to_mtd(nand); + int corr, ds_corr; + + if (conf->step_size == 0 || reqs->step_size == 0) + /* Not enough information */ + return true; + + /* + * We get the number of corrected bits per page to compare + * the correction density. + */ + corr = (mtd->writesize * conf->strength) / conf->step_size; + ds_corr = (mtd->writesize * reqs->strength) / reqs->step_size; + + return corr >= ds_corr && conf->strength >= reqs->strength; +} +EXPORT_SYMBOL(nand_ecc_is_strong_enough); + +struct nand_ecc_engine *nand_ecc_get_sw_engine(struct nand_device *nand) +{ + unsigned int algo = nand->ecc.user_conf.algo; + + if (algo == NAND_ECC_ALGO_UNKNOWN) + algo = nand->ecc.defaults.algo; + + switch (algo) { + case NAND_ECC_ALGO_HAMMING: + return nand_ecc_sw_hamming_get_engine(); + case NAND_ECC_ALGO_BCH: + return nand_ecc_sw_bch_get_engine(); + default: + break; + } + + return NULL; +} +EXPORT_SYMBOL(nand_ecc_get_sw_engine); + +struct nand_ecc_engine *nand_ecc_get_on_die_hw_engine(struct nand_device *nand) +{ + return nand->ecc.ondie_engine; +} +EXPORT_SYMBOL(nand_ecc_get_on_die_hw_engine); + +struct nand_ecc_engine *nand_ecc_get_on_host_hw_engine(struct nand_device *nand) +{ + return NULL; +} +EXPORT_SYMBOL(nand_ecc_get_on_host_hw_engine); + +void nand_ecc_put_on_host_hw_engine(struct nand_device *nand) +{ +} +EXPORT_SYMBOL(nand_ecc_put_on_host_hw_engine); diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c index 1b2eefc9041..c60c3dfad68 100644 --- a/drivers/mtd/nand/spi/core.c +++ b/drivers/mtd/nand/spi/core.c @@ -235,7 +235,7 @@ static int spinand_check_ecc_status(struct spinand_device *spinand, u8 status) * fixed, so let's return the maximum possible value so that * wear-leveling layers move the data immediately. */ - return nand->eccreq.strength; + return nanddev_get_ecc_conf(nand)->strength;
case STATUS_ECC_UNCOR_ERROR: return -EBADMSG; @@ -271,6 +271,92 @@ static const struct mtd_ooblayout_ops spinand_noecc_ooblayout = { .rfree = spinand_noecc_ooblayout_free, };
+static int spinand_ondie_ecc_init_ctx(struct nand_device *nand) +{ + struct spinand_device *spinand = nand_to_spinand(nand); + struct mtd_info *mtd = nanddev_to_mtd(nand); + struct spinand_ondie_ecc_conf *engine_conf; + + nand->ecc.ctx.conf.engine_type = NAND_ECC_ENGINE_TYPE_ON_DIE; + nand->ecc.ctx.conf.step_size = nand->ecc.requirements.step_size; + nand->ecc.ctx.conf.strength = nand->ecc.requirements.strength; + + engine_conf = kzalloc(sizeof(*engine_conf), GFP_KERNEL); + if (!engine_conf) + return -ENOMEM; + + nand->ecc.ctx.priv = engine_conf; + + if (spinand->eccinfo.ooblayout) + mtd_set_ooblayout(mtd, spinand->eccinfo.ooblayout); + else + mtd_set_ooblayout(mtd, &spinand_noecc_ooblayout); + + return 0; +} + +static void spinand_ondie_ecc_cleanup_ctx(struct nand_device *nand) +{ + kfree(nand->ecc.ctx.priv); +} + +static int spinand_ondie_ecc_prepare_io_req(struct nand_device *nand, + struct nand_page_io_req *req) +{ + struct spinand_device *spinand = nand_to_spinand(nand); + bool enable = (req->mode != MTD_OPS_RAW); + + memset(spinand->oobbuf, 0xff, nanddev_per_page_oobsize(nand)); + + /* Only enable or disable the engine */ + return spinand_ecc_enable(spinand, enable); +} + +static int spinand_ondie_ecc_finish_io_req(struct nand_device *nand, + struct nand_page_io_req *req) +{ + struct spinand_ondie_ecc_conf *engine_conf = nand->ecc.ctx.priv; + struct spinand_device *spinand = nand_to_spinand(nand); + struct mtd_info *mtd = spinand_to_mtd(spinand); + int ret; + + if (req->mode == MTD_OPS_RAW) + return 0; + + /* Nothing to do when finishing a page write */ + if (req->type == NAND_PAGE_WRITE) + return 0; + + /* Finish a page read: check the status, report errors/bitflips */ + ret = spinand_check_ecc_status(spinand, engine_conf->status); + if (ret == -EBADMSG) + mtd->ecc_stats.failed++; + else if (ret > 0) + mtd->ecc_stats.corrected += ret; + + return ret; +} + +static struct nand_ecc_engine_ops spinand_ondie_ecc_engine_ops = { + .init_ctx = spinand_ondie_ecc_init_ctx, + .cleanup_ctx = spinand_ondie_ecc_cleanup_ctx, + .prepare_io_req = spinand_ondie_ecc_prepare_io_req, + .finish_io_req = spinand_ondie_ecc_finish_io_req, +}; + +static struct nand_ecc_engine spinand_ondie_ecc_engine = { + .ops = &spinand_ondie_ecc_engine_ops, +}; + +static void spinand_ondie_ecc_save_status(struct nand_device *nand, u8 status) +{ + struct spinand_ondie_ecc_conf *engine_conf = nand->ecc.ctx.priv; + + if (nand->ecc.ctx.conf.engine_type == NAND_ECC_ENGINE_TYPE_ON_DIE && + engine_conf) + engine_conf->status = status; +} + static int spinand_write_enable_op(struct spinand_device *spinand) { struct spi_mem_op op = SPINAND_WR_EN_DIS_OP(true); @@ -313,7 +399,10 @@ static int spinand_read_from_cache_op(struct spinand_device *spinand, } }
- rdesc = spinand->dirmaps[req->pos.plane].rdesc; + if (req->mode == MTD_OPS_RAW) + rdesc = spinand->dirmaps[req->pos.plane].rdesc; + else + rdesc = spinand->dirmaps[req->pos.plane].rdesc_ecc;
while (nbytes) { ret = spi_mem_dirmap_read(rdesc, column, nbytes, buf); @@ -362,9 +451,12 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand, * must fill the page cache entirely even if we only want to program * the data portion of the page, otherwise we might corrupt the BBM or * user data previously programmed in OOB area. + * + * Only reset the data buffer manually, the OOB buffer is prepared by + * ECC engines ->prepare_io_req() callback. */ nbytes = nanddev_page_size(nand) + nanddev_per_page_oobsize(nand); - memset(spinand->databuf, 0xff, nbytes); + memset(spinand->databuf, 0xff, nanddev_page_size(nand));
if (req->datalen) memcpy(spinand->databuf + req->dataoffs, req->databuf.out, @@ -381,7 +473,10 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand, req->ooblen); }
- wdesc = spinand->dirmaps[req->pos.plane].wdesc; + if (req->mode == MTD_OPS_RAW) + wdesc = spinand->dirmaps[req->pos.plane].wdesc; + else + wdesc = spinand->dirmaps[req->pos.plane].wdesc_ecc;
while (nbytes) { ret = spi_mem_dirmap_write(wdesc, column, nbytes, buf); @@ -494,12 +589,16 @@ static int spinand_lock_block(struct spinand_device *spinand, u8 lock) }
static int spinand_read_page(struct spinand_device *spinand, - const struct nand_page_io_req *req, - bool ecc_enabled) + const struct nand_page_io_req *req) { + struct nand_device *nand = spinand_to_nand(spinand); u8 status; int ret;
+ ret = nand_ecc_prepare_io_req(nand, (struct nand_page_io_req *)req); + if (ret) + return ret; + ret = spinand_load_page_op(spinand, req); if (ret) return ret; @@ -511,22 +610,26 @@ static int spinand_read_page(struct spinand_device *spinand, if (ret < 0) return ret;
+ spinand_ondie_ecc_save_status(nand, status); + ret = spinand_read_from_cache_op(spinand, req); if (ret) return ret;
- if (!ecc_enabled) - return 0; - - return spinand_check_ecc_status(spinand, status); + return nand_ecc_finish_io_req(nand, (struct nand_page_io_req *)req); }
static int spinand_write_page(struct spinand_device *spinand, const struct nand_page_io_req *req) { + struct nand_device *nand = spinand_to_nand(spinand); u8 status; int ret;
+ ret = nand_ecc_prepare_io_req(nand, (struct nand_page_io_req *)req); + if (ret) + return ret; + ret = spinand_write_enable_op(spinand); if (ret) return ret; @@ -546,7 +649,7 @@ static int spinand_write_page(struct spinand_device *spinand, if (!ret && (status & STATUS_PROG_FAILED)) return -EIO;
- return ret; + return nand_ecc_finish_io_req(nand, (struct nand_page_io_req *)req); }
static int spinand_mtd_read(struct mtd_info *mtd, loff_t from, @@ -554,7 +657,6 @@ static int spinand_mtd_read(struct mtd_info *mtd, loff_t from, { struct spinand_device *spinand = mtd_to_spinand(mtd); struct nand_device *nand = mtd_to_nanddev(mtd); - struct mtd_ecc_stats old_stats; unsigned int max_bitflips = 0; struct nand_io_iter iter; bool disable_ecc = false; @@ -568,8 +670,6 @@ static int spinand_mtd_read(struct mtd_info *mtd, loff_t from, mutex_lock(&spinand->lock); #endif
- old_stats = mtd->ecc_stats; - nanddev_io_for_each_page(nand, NAND_PAGE_READ, from, ops, &iter) { schedule(); if (disable_ecc) @@ -579,11 +679,7 @@ static int spinand_mtd_read(struct mtd_info *mtd, loff_t from, if (ret) break;
- ret = spinand_ecc_enable(spinand, !disable_ecc); - if (ret) - break; - - ret = spinand_read_page(spinand, &iter.req, !disable_ecc); + ret = spinand_read_page(spinand, &iter.req); if (ret < 0 && ret != -EBADMSG) break;
@@ -600,13 +696,6 @@ static int spinand_mtd_read(struct mtd_info *mtd, loff_t from, ops->oobretlen += iter.req.ooblen; }
- if (ops->stats) { - ops->stats->uncorrectable_errors += - mtd->ecc_stats.failed - old_stats.failed; - ops->stats->corrected_bitflips += - mtd->ecc_stats.corrected - old_stats.corrected; - } - #ifndef __UBOOT__ mutex_unlock(&spinand->lock); #endif @@ -641,10 +730,6 @@ static int spinand_mtd_write(struct mtd_info *mtd, loff_t to, if (ret) break;
- ret = spinand_ecc_enable(spinand, !disable_ecc); - if (ret) - break; - ret = spinand_write_page(spinand, &iter.req); if (ret) break; @@ -673,7 +758,7 @@ static bool spinand_isbad(struct nand_device *nand, const struct nand_pos *pos) };
spinand_select_target(spinand, pos->target); - spinand_read_page(spinand, &req, false); + spinand_read_page(spinand, &req); if (marker[0] != 0xff || marker[1] != 0xff) return true;
@@ -841,6 +926,36 @@ static int spinand_create_dirmap(struct spinand_device *spinand,
spinand->dirmaps[plane].rdesc = desc;
+ if (nand->ecc.engine->integration != NAND_ECC_ENGINE_INTEGRATION_PIPELINED) { + spinand->dirmaps[plane].wdesc_ecc = spinand->dirmaps[plane].wdesc; + spinand->dirmaps[plane].rdesc_ecc = spinand->dirmaps[plane].rdesc; + + return 0; + } + + info.op_tmpl = *spinand->op_templates.update_cache; + info.op_tmpl.data.ecc = true; + desc = spi_mem_dirmap_create(spinand->slave, &info); + if (IS_ERR(desc)) { + spi_mem_dirmap_destroy(spinand->dirmaps[plane].wdesc); + spi_mem_dirmap_destroy(spinand->dirmaps[plane].rdesc); + return PTR_ERR(desc); + } + + spinand->dirmaps[plane].wdesc_ecc = desc; + + info.op_tmpl = *spinand->op_templates.read_cache; + info.op_tmpl.data.ecc = true; + desc = spi_mem_dirmap_create(spinand->slave, &info); + if (IS_ERR(desc)) { + spi_mem_dirmap_destroy(spinand->dirmaps[plane].wdesc); + spi_mem_dirmap_destroy(spinand->dirmaps[plane].rdesc); + spi_mem_dirmap_destroy(spinand->dirmaps[plane].wdesc_ecc); + return PTR_ERR(desc); + } + + spinand->dirmaps[plane].rdesc_ecc = desc; + return 0; }
@@ -1022,7 +1137,7 @@ int spinand_match_and_init(struct spinand_device *spinand, continue;
nand->memorg = table[i].memorg; - nand->eccreq = table[i].eccreq; + nanddev_set_ecc_requirements(nand, &table[i].eccreq); spinand->eccinfo = table[i].eccinfo; spinand->flags = table[i].flags; spinand->id.len = 1 + table[i].devid.len; @@ -1174,6 +1289,15 @@ static int spinand_init(struct spinand_device *spinand) if (ret) goto err_manuf_cleanup;
+ /* SPI-NAND default ECC engine is on-die */ + nand->ecc.defaults.engine_type = NAND_ECC_ENGINE_TYPE_ON_DIE; + nand->ecc.ondie_engine = &spinand_ondie_ecc_engine; + + spinand_ecc_enable(spinand, false); + ret = nanddev_ecc_engine_init(nand); + if (ret) + goto err_cleanup_nanddev; + mtd->_read_oob = spinand_mtd_read; mtd->_write_oob = spinand_mtd_write; mtd->_block_isbad = spinand_mtd_block_isbad; @@ -1181,17 +1305,18 @@ static int spinand_init(struct spinand_device *spinand) mtd->_block_isreserved = spinand_mtd_block_isreserved; mtd->_erase = spinand_mtd_erase;
- if (spinand->eccinfo.ooblayout) - mtd_set_ooblayout(mtd, spinand->eccinfo.ooblayout); - else - mtd_set_ooblayout(mtd, &spinand_noecc_ooblayout); - - ret = mtd_ooblayout_count_freebytes(mtd); - if (ret < 0) - goto err_cleanup_nanddev; + if (nand->ecc.engine) { + ret = mtd_ooblayout_count_freebytes(mtd); + if (ret < 0) + goto err_cleanup_ecc_engine; + }
mtd->oobavail = ret;
+ /* Propagate ECC information to mtd_info */ + mtd->ecc_strength = nanddev_get_ecc_conf(nand)->strength; + mtd->ecc_step_size = nanddev_get_ecc_conf(nand)->step_size; + ret = spinand_create_dirmaps(spinand); if (ret) { dev_err(dev, @@ -1203,6 +1328,7 @@ static int spinand_init(struct spinand_device *spinand) return 0;
err_cleanup_ecc_engine: + nanddev_ecc_engine_cleanup(nand);
err_cleanup_nanddev: nanddev_cleanup(nand); diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c index 86bffc2800b..064a9d6b2fe 100644 --- a/drivers/mtd/nand/spi/macronix.c +++ b/drivers/mtd/nand/spi/macronix.c @@ -87,10 +87,11 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand, * data around if it's not necessary. */ if (mx35lf1ge4ab_get_eccsr(spinand, &eccsr)) - return nand->eccreq.strength; + return nanddev_get_ecc_conf(nand)->strength;
- if (WARN_ON(eccsr > nand->eccreq.strength || !eccsr)) - return nand->eccreq.strength; + if (WARN_ON(eccsr > nanddev_get_ecc_conf(nand)->strength || + !eccsr)) + return nanddev_get_ecc_conf(nand)->strength;
return eccsr;
diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c index b538213ed8e..01c177facfb 100644 --- a/drivers/mtd/nand/spi/micron.c +++ b/drivers/mtd/nand/spi/micron.c @@ -14,7 +14,7 @@
#define SPINAND_MFR_MICRON 0x2c
-#define MICRON_STATUS_ECC_MASK GENMASK(7, 4) +#define MICRON_STATUS_ECC_MASK GENMASK(6, 4) #define MICRON_STATUS_ECC_NO_BITFLIPS (0 << 4) #define MICRON_STATUS_ECC_1TO3_BITFLIPS (1 << 4) #define MICRON_STATUS_ECC_4TO6_BITFLIPS (3 << 4) diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c index b9908e79271..d264cdf32ce 100644 --- a/drivers/mtd/nand/spi/toshiba.c +++ b/drivers/mtd/nand/spi/toshiba.c @@ -76,7 +76,7 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand, { struct nand_device *nand = spinand_to_nand(spinand); u8 mbf = 0; - struct spi_mem_op op = SPINAND_GET_FEATURE_OP(0x30, &mbf); + struct spi_mem_op op = SPINAND_GET_FEATURE_OP(0x30, spinand->scratchbuf);
switch (status & STATUS_ECC_MASK) { case STATUS_ECC_NO_BITFLIPS: @@ -93,12 +93,12 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand, * data around if it's not necessary. */ if (spi_mem_exec_op(spinand->slave, &op)) - return nand->eccreq.strength; + return nanddev_get_ecc_conf(nand)->strength;
- mbf >>= 4; + mbf = *(spinand->scratchbuf) >> 4;
- if (WARN_ON(mbf > nand->eccreq.strength || !mbf)) - return nand->eccreq.strength; + if (WARN_ON(mbf > nanddev_get_ecc_conf(nand)->strength || !mbf)) + return nanddev_get_ecc_conf(nand)->strength;
return mbf;
diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c index dd4ed257a83..5fe35e35ed5 100644 --- a/drivers/mtd/nand/spi/winbond.c +++ b/drivers/mtd/nand/spi/winbond.c @@ -111,7 +111,7 @@ static int w25n02kv_ecc_get_status(struct spinand_device *spinand, { struct nand_device *nand = spinand_to_nand(spinand); u8 mbf = 0; - struct spi_mem_op op = SPINAND_GET_FEATURE_OP(0x30, &mbf); + struct spi_mem_op op = SPINAND_GET_FEATURE_OP(0x30, spinand->scratchbuf);
switch (status & STATUS_ECC_MASK) { case STATUS_ECC_NO_BITFLIPS: @@ -127,12 +127,12 @@ static int w25n02kv_ecc_get_status(struct spinand_device *spinand, * data around if it's not necessary. */ if (spi_mem_exec_op(spinand->slave, &op)) - return nand->eccreq.strength; + return nanddev_get_ecc_conf(nand)->strength;
- mbf >>= 4; + mbf = *(spinand->scratchbuf) >> 4;
- if (WARN_ON(mbf > nand->eccreq.strength || !mbf)) - return nand->eccreq.strength; + if (WARN_ON(mbf > nanddev_get_ecc_conf(nand)->strength || !mbf)) + return nanddev_get_ecc_conf(nand)->strength;
return mbf;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 0afdaed5715..76808559b72 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -12,6 +12,8 @@
#include <linux/mtd/mtd.h>
+struct nand_device; + /** * struct nand_memory_organization - Memory organization structure * @bits_per_cell: number of bits per NAND cell @@ -126,17 +128,72 @@ struct nand_page_io_req { };
/** - * struct nand_ecc_req - NAND ECC requirements + * enum nand_ecc_engine_type - NAND ECC engine type + * @NAND_ECC_ENGINE_TYPE_INVALID: Invalid value + * @NAND_ECC_ENGINE_TYPE_NONE: No ECC correction + * @NAND_ECC_ENGINE_TYPE_SOFT: Software ECC correction + * @NAND_ECC_ENGINE_TYPE_ON_HOST: On host hardware ECC correction + * @NAND_ECC_ENGINE_TYPE_ON_DIE: On chip hardware ECC correction + */ +enum nand_ecc_engine_type { + NAND_ECC_ENGINE_TYPE_INVALID, + NAND_ECC_ENGINE_TYPE_NONE, + NAND_ECC_ENGINE_TYPE_SOFT, + NAND_ECC_ENGINE_TYPE_ON_HOST, + NAND_ECC_ENGINE_TYPE_ON_DIE, +}; + +/** + * enum nand_ecc_placement - NAND ECC bytes placement + * @NAND_ECC_PLACEMENT_UNKNOWN: The actual position of the ECC bytes is unknown + * @NAND_ECC_PLACEMENT_OOB: The ECC bytes are located in the OOB area + * @NAND_ECC_PLACEMENT_INTERLEAVED: Syndrome layout, there are ECC bytes + * interleaved with regular data in the main + * area + */ +enum nand_ecc_placement { + NAND_ECC_PLACEMENT_UNKNOWN, + NAND_ECC_PLACEMENT_OOB, + NAND_ECC_PLACEMENT_INTERLEAVED, +}; + +/** + * enum nand_ecc_algo - NAND ECC algorithm + * @NAND_ECC_ALGO_UNKNOWN: Unknown algorithm + * @NAND_ECC_ALGO_HAMMING: Hamming algorithm + * @NAND_ECC_ALGO_BCH: Bose-Chaudhuri-Hocquenghem algorithm + * @NAND_ECC_ALGO_RS: Reed-Solomon algorithm + */ +enum nand_ecc_algo { + NAND_ECC_ALGO_UNKNOWN, + NAND_ECC_ALGO_HAMMING, + NAND_ECC_ALGO_BCH, + NAND_ECC_ALGO_RS, +}; + +/** + * struct nand_ecc_props - NAND ECC properties + * @engine_type: ECC engine type + * @placement: OOB placement (if relevant) + * @algo: ECC algorithm (if relevant) * @strength: ECC strength - * @step_size: ECC step/block size + * @step_size: Number of bytes per step + * @flags: Misc properties */ -struct nand_ecc_req { +struct nand_ecc_props { + enum nand_ecc_engine_type engine_type; + enum nand_ecc_placement placement; + enum nand_ecc_algo algo; unsigned int strength; unsigned int step_size; + unsigned int flags; };
#define NAND_ECCREQ(str, stp) { .strength = (str), .step_size = (stp) }
+/* NAND ECC misc flags */ +#define NAND_ECC_MAXIMIZE_STRENGTH BIT(0) + /** * struct nand_bbt - bad block table object * @cache: in memory BBT cache @@ -145,8 +202,6 @@ struct nand_bbt { unsigned long *cache; };
-struct nand_device; - /** * struct nand_ops - NAND operations * @erase: erase a specific block. No need to check if the block is bad before @@ -169,11 +224,129 @@ struct nand_ops { bool (*isbad)(struct nand_device *nand, const struct nand_pos *pos); };
+/** + * struct nand_ecc_context - Context for the ECC engine + * @conf: basic ECC engine parameters + * @nsteps: number of ECC steps + * @total: total number of bytes used for storing ECC codes, this is used by + * generic OOB layouts + * @priv: ECC engine driver private data + */ +struct nand_ecc_context { + struct nand_ecc_props conf; + unsigned int nsteps; + unsigned int total; + void *priv; +}; + +/** + * struct nand_ecc_engine_ops - ECC engine operations + * @init_ctx: given a desired user configuration for the pointed NAND device, + * requests the ECC engine driver to setup a configuration with + * values it supports. + * @cleanup_ctx: clean the context initialized by @init_ctx. + * @prepare_io_req: is called before reading/writing a page to prepare the I/O + * request to be performed with ECC correction. + * @finish_io_req: is called after reading/writing a page to terminate the I/O + * request and ensure proper ECC correction. + */ +struct nand_ecc_engine_ops { + int (*init_ctx)(struct nand_device *nand); + void (*cleanup_ctx)(struct nand_device *nand); + int (*prepare_io_req)(struct nand_device *nand, + struct nand_page_io_req *req); + int (*finish_io_req)(struct nand_device *nand, + struct nand_page_io_req *req); +}; + +/** + * enum nand_ecc_engine_integration - How the NAND ECC engine is integrated + * @NAND_ECC_ENGINE_INTEGRATION_INVALID: Invalid value + * @NAND_ECC_ENGINE_INTEGRATION_PIPELINED: Pipelined engine, performs on-the-fly + * correction, does not need to copy + * data around + * @NAND_ECC_ENGINE_INTEGRATION_EXTERNAL: External engine, needs to bring the + * data into its own area before use + */ +enum nand_ecc_engine_integration { + NAND_ECC_ENGINE_INTEGRATION_INVALID, + NAND_ECC_ENGINE_INTEGRATION_PIPELINED, + NAND_ECC_ENGINE_INTEGRATION_EXTERNAL, +}; + +/** + * struct nand_ecc_engine - ECC engine abstraction for NAND devices + * @dev: Host device + * @node: Private field for registration time + * @ops: ECC engine operations + * @integration: How the engine is integrated with the host + * (only relevant on %NAND_ECC_ENGINE_TYPE_ON_HOST engines) + * @priv: Private data + */ +struct nand_ecc_engine { + struct device *dev; + struct list_head node; + struct nand_ecc_engine_ops *ops; + enum nand_ecc_engine_integration integration; + void *priv; +}; + +int nand_ecc_init_ctx(struct nand_device *nand); +void nand_ecc_cleanup_ctx(struct nand_device *nand); +int nand_ecc_prepare_io_req(struct nand_device *nand, + struct nand_page_io_req *req); +int nand_ecc_finish_io_req(struct nand_device *nand, + struct nand_page_io_req *req); +bool nand_ecc_is_strong_enough(struct nand_device *nand); + +struct nand_ecc_engine *nand_ecc_get_sw_engine(struct nand_device *nand); +struct nand_ecc_engine *nand_ecc_get_on_die_hw_engine(struct nand_device *nand); +struct nand_ecc_engine *nand_ecc_get_on_host_hw_engine(struct nand_device *nand); +void nand_ecc_put_on_host_hw_engine(struct nand_device *nand); +struct device *nand_ecc_get_engine_dev(struct device *host); + +#if defined(CONFIG_MTD_NAND_ECC_SW_HAMMING) +struct nand_ecc_engine *nand_ecc_sw_hamming_get_engine(void); +#else +static inline struct nand_ecc_engine *nand_ecc_sw_hamming_get_engine(void) +{ + return NULL; +} +#endif + +#if defined(CONFIG_MTD_NAND_ECC_SW_BCH) +struct nand_ecc_engine *nand_ecc_sw_bch_get_engine(void); +#else +static inline struct nand_ecc_engine *nand_ecc_sw_bch_get_engine(void) +{ + return NULL; +} +#endif + +/** + * struct nand_ecc - Information relative to the ECC + * @defaults: Default values, depend on the underlying subsystem + * @requirements: ECC requirements from the NAND chip perspective + * @user_conf: User desires in terms of ECC parameters + * @ctx: ECC context for the ECC engine, derived from the device @requirements + * the @user_conf and the @defaults + * @ondie_engine: On-die ECC engine reference, if any + * @engine: ECC engine actually bound + */ +struct nand_ecc { + struct nand_ecc_props defaults; + struct nand_ecc_props requirements; + struct nand_ecc_props user_conf; + struct nand_ecc_context ctx; + struct nand_ecc_engine *ondie_engine; + struct nand_ecc_engine *engine; +}; + /** * struct nand_device - NAND device * @mtd: MTD instance attached to the NAND device * @memorg: memory layout - * @eccreq: ECC requirements + * @ecc: NAND ECC object attached to the NAND device * @rowconv: position to row address converter * @bbt: bad block table info * @ops: NAND operations attached to the NAND device @@ -181,8 +354,8 @@ struct nand_ops { * Generic NAND object. Specialized NAND layers (raw NAND, SPI NAND, OneNAND) * should declare their own NAND object embedding a nand_device struct (that's * how inheritance is done). - * struct_nand_device->memorg and struct_nand_device->eccreq should be filled - * at device detection time to reflect the NAND device + * struct_nand_device->memorg and struct_nand_device->ecc.requirements should + * be filled at device detection time to reflect the NAND device * capabilities/requirements. Once this is done nanddev_init() can be called. * It will take care of converting NAND information into MTD ones, which means * the specialized NAND layers should never manually tweak @@ -191,7 +364,7 @@ struct nand_ops { struct nand_device { struct mtd_info *mtd; struct nand_memory_organization memorg; - struct nand_ecc_req eccreq; + struct nand_ecc ecc; struct nand_row_converter rowconv; struct nand_bbt bbt; const struct nand_ops *ops; @@ -332,7 +505,7 @@ static inline unsigned int nanddev_ntargets(const struct nand_device *nand) }
/** - * nanddev_neraseblocks() - Get the total number of erasablocks + * nanddev_neraseblocks() - Get the total number of eraseblocks * @nand: NAND device * * Return: the total number of eraseblocks exposed by @nand. @@ -370,6 +543,60 @@ nanddev_get_memorg(struct nand_device *nand) return &nand->memorg; }
+/** + * nanddev_get_ecc_conf() - Extract the ECC configuration from a NAND device + * @nand: NAND device + */ +static inline const struct nand_ecc_props * +nanddev_get_ecc_conf(struct nand_device *nand) +{ + return &nand->ecc.ctx.conf; +} + +/** + * nanddev_get_ecc_nsteps() - Extract the number of ECC steps + * @nand: NAND device + */ +static inline unsigned int +nanddev_get_ecc_nsteps(struct nand_device *nand) +{ + return nand->ecc.ctx.nsteps; +} + +/** + * nanddev_get_ecc_bytes_per_step() - Extract the number of ECC bytes per step + * @nand: NAND device + */ +static inline unsigned int +nanddev_get_ecc_bytes_per_step(struct nand_device *nand) +{ + return nand->ecc.ctx.total / nand->ecc.ctx.nsteps; +} + +/** + * nanddev_get_ecc_requirements() - Extract the ECC requirements from a NAND + * device + * @nand: NAND device + */ +static inline const struct nand_ecc_props * +nanddev_get_ecc_requirements(struct nand_device *nand) +{ + return &nand->ecc.requirements; +} + +/** + * nanddev_set_ecc_requirements() - Assign the ECC requirements of a NAND + * device + * @nand: NAND device + * @reqs: Requirements + */ +static inline void +nanddev_set_ecc_requirements(struct nand_device *nand, + const struct nand_ecc_props *reqs) +{ + nand->ecc.requirements = *reqs; +} + int nanddev_init(struct nand_device *nand, const struct nand_ops *ops, struct module *owner); void nanddev_cleanup(struct nand_device *nand); @@ -598,7 +825,7 @@ static inline void nanddev_pos_next_eraseblock(struct nand_device *nand, }
/** - * nanddev_pos_next_eraseblock() - Move a position to the next page + * nanddev_pos_next_page() - Move a position to the next page * @nand: NAND device * @pos: the position to update * @@ -708,8 +935,18 @@ static inline bool nanddev_io_iter_end(struct nand_device *nand,
bool nanddev_isbad(struct nand_device *nand, const struct nand_pos *pos); bool nanddev_isreserved(struct nand_device *nand, const struct nand_pos *pos); +int nanddev_erase(struct nand_device *nand, const struct nand_pos *pos); int nanddev_markbad(struct nand_device *nand, const struct nand_pos *pos);
+/* ECC related functions */ +int nanddev_ecc_engine_init(struct nand_device *nand); +void nanddev_ecc_engine_cleanup(struct nand_device *nand); + +static inline void *nand_to_ecc_ctx(struct nand_device *nand) +{ + return nand->ecc.ctx.priv; +} + /* BBT related functions */ enum nand_bbt_block_status { NAND_BBT_BLOCK_STATUS_UNKNOWN, @@ -760,5 +997,6 @@ static inline bool nanddev_bbt_is_initialized(struct nand_device *nand)
/* MTD -> NAND helper functions. */ int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo); +int nanddev_mtd_max_bad_blocks(struct mtd_info *mtd, loff_t offs, size_t len);
#endif /* __LINUX_MTD_NAND_H */ diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h index b701d25f73d..cb32bd44a9a 100644 --- a/include/linux/mtd/spinand.h +++ b/include/linux/mtd/spinand.h @@ -316,6 +316,15 @@ struct spinand_ecc_info { #define SPINAND_HAS_QE_BIT BIT(0) #define SPINAND_HAS_CR_FEAT_BIT BIT(1)
+/** + * struct spinand_ondie_ecc_conf - private SPI-NAND on-die ECC engine structure + * @status: status of the last wait operation that will be used in case + * ->get_status() is not populated by the spinand device. + */ +struct spinand_ondie_ecc_conf { + u8 status; +}; + /** * struct spinand_info - Structure used to describe SPI NAND chips * @model: model name @@ -339,7 +348,7 @@ struct spinand_info { struct spinand_devid devid; u32 flags; struct nand_memory_organization memorg; - struct nand_ecc_req eccreq; + struct nand_ecc_props eccreq; struct spinand_ecc_info eccinfo; struct { const struct spinand_op_variants *read_cache; @@ -388,6 +397,8 @@ struct spinand_info { struct spinand_dirmap { struct spi_mem_dirmap_desc *wdesc; struct spi_mem_dirmap_desc *rdesc; + struct spi_mem_dirmap_desc *wdesc_ecc; + struct spi_mem_dirmap_desc *rdesc_ecc; };
/** diff --git a/include/spi-mem.h b/include/spi-mem.h index 3c8e95b6f53..82dbe21fd5a 100644 --- a/include/spi-mem.h +++ b/include/spi-mem.h @@ -91,6 +91,7 @@ enum spi_mem_data_dir { * @dummy.dtr: whether the dummy bytes should be sent in DTR mode or not * @data.buswidth: number of IO lanes used to send/receive the data * @data.dtr: whether the data should be sent in DTR mode or not + * @data.ecc: whether error correction is required or not * @data.dir: direction of the transfer * @data.buf.in: input buffer * @data.buf.out: output buffer @@ -119,6 +120,7 @@ struct spi_mem_op { struct { u8 buswidth; u8 dtr : 1; + u8 ecc : 1; enum spi_mem_data_dir dir; unsigned int nbytes; /* buf.{in,out} must be DMA-able. */