The enable_caches is a generic hook for architecture-implemented, we define this function to enable composable cache of sifive platforms.
In sifive_cache, it invokes the generic cache_enable interface of cache uclass to execute the relative implementation in SiFive ccache driver.
Signed-off-by: Zong Li zong.li@sifive.com --- arch/riscv/Kconfig | 5 +++++ arch/riscv/lib/Makefile | 1 + arch/riscv/lib/sifive_cache.c | 27 +++++++++++++++++++++++++++ common/board_r.c | 4 ++-- 4 files changed, 35 insertions(+), 2 deletions(-) create mode 100644 arch/riscv/lib/sifive_cache.c
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 4b0c3dffa6..ec651fe0a4 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -179,6 +179,11 @@ config SPL_SIFIVE_CLINT The SiFive CLINT block holds memory-mapped control and status registers associated with software and timer interrupts.
+config SIFIVE_CACHE + bool + help + This enables the operations to configure SiFive cache + config ANDES_PLIC bool depends on RISCV_MMODE || SPL_RISCV_MMODE diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile index c4cc41434b..06020fcc2a 100644 --- a/arch/riscv/lib/Makefile +++ b/arch/riscv/lib/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-$(CONFIG_CMD_BOOTI) += bootm.o image.o obj-$(CONFIG_CMD_GO) += boot.o obj-y += cache.o +obj-$(CONFIG_SIFIVE_CACHE) += sifive_cache.o ifeq ($(CONFIG_$(SPL_)RISCV_MMODE),y) obj-$(CONFIG_$(SPL_)SIFIVE_CLINT) += sifive_clint.o obj-$(CONFIG_ANDES_PLIC) += andes_plic.o diff --git a/arch/riscv/lib/sifive_cache.c b/arch/riscv/lib/sifive_cache.c new file mode 100644 index 0000000000..28154878fc --- /dev/null +++ b/arch/riscv/lib/sifive_cache.c @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2021 SiFive, Inc + */ + +#include <common.h> +#include <cache.h> +#include <cpu_func.h> +#include <dm.h> + +void enable_caches(void) +{ + struct udevice *dev; + int ret; + + /* Enable ways of ccache */ + ret = uclass_get_device_by_driver(UCLASS_CACHE, + DM_DRIVER_GET(sifive_ccache), + &dev); + if (ret) { + log_debug("Cannot enable cache ways"); + } else { + ret = cache_enable(dev); + if (ret) + log_debug("ccache enable failed"); + } +} diff --git a/common/board_r.c b/common/board_r.c index e3e6248a1f..630c2451a2 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -114,7 +114,7 @@ static int initr_reloc(void) return 0; }
-#ifdef CONFIG_ARM +#if defined(CONFIG_ARM) || defined(CONFIG_RISCV) /* * Some of these functions are needed purely because the functions they * call return void. If we change them to return 0, these stubs can go away. @@ -607,7 +607,7 @@ static init_fnc_t init_sequence_r[] = { initr_trace, initr_reloc, /* TODO: could x86/PPC have this also perhaps? */ -#ifdef CONFIG_ARM +#if defined(CONFIG_ARM) || defined(CONFIG_RISCV) initr_caches, /* Note: For Freescale LS2 SoCs, new MMU table is created in DDR. * A temporary mapping of IFC high region is since removed,