27 May
2013
27 May
'13
3:37 p.m.
Hi Monica,
On Mon, May 27, 2013 at 10:01 AM, Monica monica_s@hcl.com wrote:
We are using BDI3000 to Burn u-boot.bin to Flash memory. The flash we are using is Spansion S29GL512S.
As per the flash datasheet we tried programming 4 bytes( using telnet mmb command) write buffer programming cycle. We succeeded.
But when we tried programming a binary file ( u-boot.bin) ,it was failing. Even though the log shows Flash programming passed but in the location when we do a mdh there is no u-boot data.
Please find the log captured below.
IMX6#0>
Your email subject mentions 85xx, but the prompt above says mx6.
Which CPU does your board have?