while compiling I got an error System not configured - see README. SO how can I configure it for NItrogen6x board?
On Thu, Jan 23, 2014 at 8:38 PM, Jagan Teki jagannadh.teki@gmail.comwrote:
Have some boot flow png's long back with previous version (not the current) [1] I thought it could be a starter - not equivalently same. If possible better take this as a reference and start tagging around the source.
[1] http://jagannadhteki.blog.com/2014/01/23/u-boot-functional-flowarm/
thanks!
On Thu, Jan 23, 2014 at 6:10 PM, Mj Embd mj.embd@gmail.com wrote:
a) step 1 - compile and build the bin / etf b) step 2 - create an asm - objdump -DS c) find the lds file d) locate uboot.map
start from __start. (keep an arm manual handy) & begin.
:)
On 1/23/14, JYOTI DUBEY jyoti0801@gmail.com wrote:
Can anyone tell how to understand the flow of u-boot source code? I am working on ARM processor and the board used is Nitrogen6X.
-- Jagan.