9 Apr
2019
9 Apr
'19
9:02 a.m.
On 09. 04. 19 8:57, Luca Ceresoli wrote:
The Kconfig help has not been updated while adding PCA9547 and PCA9646.
Signed-off-by: Luca Ceresoli luca@lucaceresoli.net
Changes v1 -> v2:
- add missing comma (Michal)
- reword and rewrap the sentence
drivers/i2c/muxes/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig index b0da67ce2c6b..4a601c88b78f 100644 --- a/drivers/i2c/muxes/Kconfig +++ b/drivers/i2c/muxes/Kconfig @@ -29,11 +29,11 @@ config I2C_MUX_PCA954x tristate "TI PCA954x I2C Mux/switches" depends on I2C_MUX help
If you say yes here you get support for the TI PCA954xI2C mux/switch devices. It is x width I2C multiplexer which enables topartitioning I2C bus and connect multiple devices with the same addressto the same I2C controller where driver handles proper routing totarget i2c device. PCA9544 and PCA9548 are supported.
If you say yes here you get support for the TI PCA954x I2C mux/switchdevices. It is x width I2C multiplexer which enables to partitioningI2C bus and connect multiple devices with the same address to the sameI2C controller where driver handles proper routing to target i2cdevice. Supported chips are PCA9544, PCA9547, PCA9548 and PCA9646.config I2C_MUX_GPIO tristate "GPIO-based I2C multiplexer"
Acked-by: Michal Simek michal.simek@xilinx.com
Thanks, Michal