The Primary-to-Sideband bus (P2SB) is used to access various peripherals through memory-mapped I/O in a large chunk of PCI space. The space is segmented into different channels and peripherals are accessed by device-specific means within those channels. Devices should be added in the device tree as subnodes of the p2sb.
This adds a uclass and enables it for sandbox.
Signed-off-by: Simon Glass sjg@chromium.org ---
configs/sandbox_defconfig | 1 + configs/sandbox_spl_defconfig | 1 + drivers/misc/Kconfig | 33 ++++++ drivers/misc/Makefile | 1 + drivers/misc/p2sb-uclass.c | 199 ++++++++++++++++++++++++++++++++++ include/dm/uclass-id.h | 1 + include/p2sb.h | 127 ++++++++++++++++++++++ 7 files changed, 363 insertions(+) create mode 100644 drivers/misc/p2sb-uclass.c create mode 100644 include/p2sb.h
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index f77b9e8a7d1..6f4d8449290 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -149,6 +149,7 @@ CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCI_SANDBOX=y +CONFIG_P2SB=y CONFIG_PHY=y CONFIG_PHY_SANDBOX=y CONFIG_PINCTRL=y diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig index 409b8a38d5e..c49e05ec319 100644 --- a/configs/sandbox_spl_defconfig +++ b/configs/sandbox_spl_defconfig @@ -135,6 +135,7 @@ CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCI_SANDBOX=y +CONFIG_P2SB=y CONFIG_PHY=y CONFIG_PHY_SANDBOX=y CONFIG_PINCTRL=y diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 8037b6ee2d7..74055a35516 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -217,6 +217,39 @@ config NUVOTON_NCT6102D disable the legacy UART, the watchdog or other devices in the Nuvoton Super IO chips on X86 platforms.
+config P2SB + bool "Intel Primary-to-Sideband Bus" + depends on X86 || SANDBOX + help + This enables support for the Intel Primary-to-Sideband bus, + abbreviated to P2SB. The P2SB is used to access various peripherals + such as eSPI, GPIO, through memory-mapped I/O in a large chunk of PCI + space. The space is segmented into different channels and peripherals + are accessed by device-specific means within those channels. Devices + should be added in the device tree as subnodes of the P2SB. A + Peripheral Channel Register? (PCR) API is provided to access those + devices - see pcr_readl(), etc. + +config SPL_P2SB + bool "Intel Primary-to-Sideband Bus in SPL" + depends on SPL && (X86 || SANDBOX) + help + The Primary-to-Sideband bus is used to access various peripherals + through memory-mapped I/O in a large chunk of PCI space. The space is + segmented into different channels and peripherals are accessed by + device-specific means within those channels. Devices should be added + in the device tree as subnodes of the p2sb. + +config TPL_P2SB + bool "Intel Primary-to-Sideband Bus in TPL" + depends on TPL && (X86 || SANDBOX) + help + The Primary-to-Sideband bus is used to access various peripherals + through memory-mapped I/O in a large chunk of PCI space. The space is + segmented into different channels and peripherals are accessed by + device-specific means within those channels. Devices should be added + in the device tree as subnodes of the p2sb. + config PWRSEQ bool "Enable power-sequencing drivers" depends on DM diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 0001d105bae..840d9fa5e39 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o obj-$(CONFIG_NS87308) += ns87308.o obj-$(CONFIG_NUVOTON_NCT6102D) += nuvoton_nct6102d.o +obj-$(CONFIG_P2SB) += p2sb-uclass.o obj-$(CONFIG_PCA9551_LED) += pca9551_led.o obj-$(CONFIG_$(SPL_)PWRSEQ) += pwrseq-uclass.o obj-$(CONFIG_QFW) += qfw.o diff --git a/drivers/misc/p2sb-uclass.c b/drivers/misc/p2sb-uclass.c new file mode 100644 index 00000000000..7915eb5c3ed --- /dev/null +++ b/drivers/misc/p2sb-uclass.c @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Uclass for Primary-to-sideband bus, used to access various peripherals + * + * Copyright 2019 Google LLC + * Written by Simon Glass sjg@chromium.org + */ + +#include <common.h> +#include <dm.h> +#include <mapmem.h> +#include <p2sb.h> +#include <asm/io.h> +#include <dm/uclass-internal.h> + +#define PCR_COMMON_IOSF_1_0 1 + +static void *_pcr_reg_address(struct udevice *dev, uint offset) +{ + struct p2sb_child_platdata *pplat = dev_get_parent_platdata(dev); + struct udevice *p2sb = dev_get_parent(dev); + struct p2sb_uc_priv *upriv = dev_get_uclass_priv(p2sb); + uintptr_t reg_addr; + + /* Create an address based off of port id and offset */ + reg_addr = upriv->mmio_base; + reg_addr += pplat->pid << PCR_PORTID_SHIFT; + reg_addr += offset; + + return map_sysmem(reg_addr, 4); +} + +/* + * The mapping of addresses via the SBREG_BAR assumes the IOSF-SB + * agents are using 32-bit aligned accesses for their configuration + * registers. For IOSF versions greater than 1_0, IOSF-SB + * agents can use any access (8/16/32 bit aligned) for their + * configuration registers + */ +static inline void check_pcr_offset_align(uint offset, uint size) +{ + const size_t align = PCR_COMMON_IOSF_1_0 ? sizeof(uint32_t) : size; + + assert(IS_ALIGNED(offset, align)); +} + +uint pcr_read32(struct udevice *dev, uint offset) +{ + void *ptr; + uint val; + + /* Ensure the PCR offset is correctly aligned */ + assert(IS_ALIGNED(offset, sizeof(uint32_t))); + + ptr = _pcr_reg_address(dev, offset); + val = readl(ptr); + unmap_sysmem(ptr); + + return val; +} + +uint pcr_read16(struct udevice *dev, uint offset) +{ + /* Ensure the PCR offset is correctly aligned */ + check_pcr_offset_align(offset, sizeof(uint16_t)); + + return readw(_pcr_reg_address(dev, offset)); +} + +uint pcr_read8(struct udevice *dev, uint offset) +{ + /* Ensure the PCR offset is correctly aligned */ + check_pcr_offset_align(offset, sizeof(uint8_t)); + + return readb(_pcr_reg_address(dev, offset)); +} + +/* + * After every write one needs to perform a read an innocuous register to + * ensure the writes are completed for certain ports. This is done for + * all ports so that the callers don't need the per-port knowledge for + * each transaction. + */ +static void write_completion(struct udevice *dev, uint offset) +{ + readl(_pcr_reg_address(dev, ALIGN_DOWN(offset, sizeof(uint32_t)))); +} + +void pcr_write32(struct udevice *dev, uint offset, uint indata) +{ + /* Ensure the PCR offset is correctly aligned */ + assert(IS_ALIGNED(offset, sizeof(indata))); + + writel(indata, _pcr_reg_address(dev, offset)); + /* Ensure the writes complete */ + write_completion(dev, offset); +} + +void pcr_write16(struct udevice *dev, uint offset, uint indata) +{ + /* Ensure the PCR offset is correctly aligned */ + check_pcr_offset_align(offset, sizeof(uint16_t)); + + writew(indata, _pcr_reg_address(dev, offset)); + /* Ensure the writes complete */ + write_completion(dev, offset); +} + +void pcr_write8(struct udevice *dev, uint offset, uint indata) +{ + /* Ensure the PCR offset is correctly aligned */ + check_pcr_offset_align(offset, sizeof(uint8_t)); + + writeb(indata, _pcr_reg_address(dev, offset)); + /* Ensure the writes complete */ + write_completion(dev, offset); +} + +void pcr_clrsetbits32(struct udevice *dev, uint offset, uint clr, uint set) +{ + uint data32; + + data32 = pcr_read32(dev, offset); + data32 &= ~clr; + data32 |= set; + pcr_write32(dev, offset, data32); +} + +void pcr_clrsetbits16(struct udevice *dev, uint offset, uint clr, uint set) +{ + uint data16; + + data16 = pcr_read16(dev, offset); + data16 &= ~clr; + data16 |= set; + pcr_write16(dev, offset, data16); +} + +void pcr_clrsetbits8(struct udevice *dev, uint offset, uint clr, uint set) +{ + uint data8; + + data8 = pcr_read8(dev, offset); + data8 &= ~clr; + data8 |= set; + pcr_write8(dev, offset, data8); +} + +int p2sb_set_port_id(struct udevice *dev, int portid) +{ + struct udevice *ps2b; + struct p2sb_child_platdata *pplat; + + if (!CONFIG_IS_ENABLED(OF_PLATDATA)) + return -ENOSYS; + + uclass_find_first_device(UCLASS_P2SB, &ps2b); + if (!ps2b) + return -EDEADLK; + dev->parent = ps2b; + + /* + * We must allocate this, since when the device was bound it did not + * have a parent. + * TODO(sjg@chromium.org): Add a parent pointer to child devices in dtoc + */ + dev->parent_platdata = malloc(sizeof(*pplat)); + if (!dev->parent_platdata) + return -ENOMEM; + pplat = dev_get_parent_platdata(dev); + pplat->pid = portid; + + return 0; +} + +static int p2sb_child_post_bind(struct udevice *dev) +{ +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + struct p2sb_child_platdata *pplat = dev_get_parent_platdata(dev); + int ret; + u32 pid; + + ret = dev_read_u32(dev, "intel,p2sb-port-id", &pid); + if (ret) + return ret; + pplat->pid = pid; +#endif + + return 0; +} + +UCLASS_DRIVER(p2sb) = { + .id = UCLASS_P2SB, + .name = "p2sb", + .per_device_auto_alloc_size = sizeof(struct p2sb_uc_priv), + .child_post_bind = p2sb_child_post_bind, + .per_child_platdata_auto_alloc_size = + sizeof(struct p2sb_child_platdata), +}; diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index 907fe257ad1..496570ff47d 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -68,6 +68,7 @@ enum uclass_id { UCLASS_NOP, /* No-op devices */ UCLASS_NORTHBRIDGE, /* Intel Northbridge / SDRAM controller */ UCLASS_NVME, /* NVM Express device */ + UCLASS_P2SB, /* (x86) Primary-to-Sideband Bus */ UCLASS_PANEL, /* Display panel, such as an LCD */ UCLASS_PANEL_BACKLIGHT, /* Backlight controller for panel */ UCLASS_PCH, /* x86 platform controller hub */ diff --git a/include/p2sb.h b/include/p2sb.h new file mode 100644 index 00000000000..370f127058c --- /dev/null +++ b/include/p2sb.h @@ -0,0 +1,127 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 Google LLC + * Written by Simon Glass sjg@chromium.org + */ + +#ifndef __p2sb_h +#define __p2sb_h + +/* Port Id lives in bits 23:16 and register offset lives in 15:0 of address */ +#define PCR_PORTID_SHIFT 16 + +/** + * struct p2sb_child_platdata - Information about each child of a p2sb device + * + * @pid: Port ID for this child + */ +struct p2sb_child_platdata { + uint pid; +}; + +/** + * struct p2sb_uc_priv - information for the uclass about each device + * + * This must be set up by the driver when it is probed + * + * @mmio_base: Base address of P2SB region + */ +struct p2sb_uc_priv { + uint mmio_base; +}; + +/** + * struct p2sb_ops - Operations for the P2SB (none at present) + */ +struct p2sb_ops { +}; + +#define p2sb_get_ops(dev) ((struct p2sb_ops *)(dev)->driver->ops) + +/** + * pcr_read32/16/8() - Read from a PCR device + * + * Reads data from a PCR device within the P2SB + * + * @dev: Device to read from + * @offset: Offset within device to read + * @return value read + */ +uint pcr_read32(struct udevice *dev, uint offset); +uint pcr_read16(struct udevice *dev, uint offset); +uint pcr_read8(struct udevice *dev, uint offset); + +/** + * pcr_read32/16/8() - Write to a PCR device + * + * Writes data to a PCR device within the P2SB + * + * @dev: Device to write to + * @offset: Offset within device to write + * @data: Data to write + */ +void pcr_write32(struct udevice *dev, uint offset, uint data); +void pcr_write16(struct udevice *dev, uint offset, uint data); +void pcr_write8(struct udevice *dev, uint offset, uint data); + +/** + * pcr_clrsetbits32/16/8() - Update a PCR device + * + * Updates dat in a PCR device within the P2SB + * + * This reads from the device, clears and set bits, then writes back. + * + * new_data = (old_data & ~clr) | set + * + * @dev: Device to update + * @offset: Offset within device to update + * @clr: Bits to clear after reading + * @set: Bits to set before writing + */ +void pcr_clrsetbits32(struct udevice *dev, uint offset, uint clr, uint set); +void pcr_clrsetbits16(struct udevice *dev, uint offset, uint clr, uint set); +void pcr_clrsetbits8(struct udevice *dev, uint offset, uint clr, uint set); + +static inline void pcr_setbits32(struct udevice *dev, uint offset, uint set) +{ + return pcr_clrsetbits32(dev, offset, 0, set); +} + +static inline void pcr_setbits16(struct udevice *dev, uint offset, uint set) +{ + return pcr_clrsetbits16(dev, offset, 0, set); +} + +static inline void pcr_setbits8(struct udevice *dev, uint offset, uint set) +{ + return pcr_clrsetbits8(dev, offset, 0, set); +} + +static inline void pcr_clrbits32(struct udevice *dev, uint offset, uint clr) +{ + return pcr_clrsetbits32(dev, offset, clr, 0); +} + +static inline void pcr_clrbits16(struct udevice *dev, uint offset, uint clr) +{ + return pcr_clrsetbits16(dev, offset, clr, 0); +} + +static inline void pcr_clrbits8(struct udevice *dev, uint offset, uint clr) +{ + return pcr_clrsetbits8(dev, offset, clr, 0); +} + +/** + * p2sb_set_port_id() - Set the port ID for a p2sb child device + * + * This must be called in a device's bind() method when OF_PLATDATA is used + * since the uclass cannot access the device's of-platdata. + * + * @dev: Child device (whose parent is UCLASS_P2SB) + * @portid: Port ID of child device + * @return 0 if OK, -ENODEV is the p2sb device could not be found + */ +int p2sb_set_port_id(struct udevice *dev, int portid); + +#endif