Aneesh,
On 03/04/2015 11:38 PM, Aneesh Bansal wrote:
Secure Boot Target is added for NAND for P3041. Changes: In PowerPC, the core begins execution from address 0xFFFFFFFC. In case of secure boot, this default address maps to Boot ROM. The Boot ROM code requires that the bootloader(U-boot) must lie in 0 to 3.5G address space i.e. 0x0 - 0xDFFFFFFF.
In case of NAND Secure Boot, CONFIG_SYS_RAMBOOT is enabled and CPC is configured as SRAM. U-Boot binary will be located on this SRAM at location 0xBFF40000 with entry point as 0xBFFFFFFC.
Signed-off-by: Ruchika Gupta ruchika.gupta@freescale.com Signed-off-by: Aneesh Bansal aneesh.bansal@freescale.com
Changes in v6: Changed the version in Patchset.
Are we closed on this patch discussion? I see open discussion for v4 patch after you posted v6.
York