Change the order to connect gmiitorgmii before PHY creation. The gmiitorgmii create additional in DTS configured PHY during it's configuration. This ensures, that converter sits between the MAC and the external phy MAC <==> GMII2RGMII <==> RGMII_PHY.
Fixes: commit a744a284e354 ("net: phy: Add support for ethernet-phy-id with gpio reset") Signed-off-by: Tapio Reijonen tapio.reijonen@vaisala.com ---
drivers/net/phy/phy.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 716a1d46111..740533adeca 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -939,14 +939,14 @@ struct phy_device *phy_connect(struct mii_dev *bus, int addr, phydev = phy_device_create(bus, 0, PHY_NCSI_ID, false); #endif
-#ifdef CONFIG_PHY_ETHERNET_ID +#ifdef CONFIG_PHY_XILINX_GMII2RGMII if (!phydev) - phydev = phy_connect_phy_id(bus, dev, addr); + phydev = phy_connect_gmii2rgmii(bus, dev); #endif
-#ifdef CONFIG_PHY_XILINX_GMII2RGMII +#ifdef CONFIG_PHY_ETHERNET_ID if (!phydev) - phydev = phy_connect_gmii2rgmii(bus, dev); + phydev = phy_connect_phy_id(bus, dev, addr); #endif
if (!phydev)