Hi Jeremy,
First of all please send the patch via git send-email command.
On 03/26/2015 10:08 AM, Jeremy Herbert wrote:
Hi all,
I just tried to build the latest master mainline u-boot for a xilinx zynq 7010 board called the red pitaya. I'm not affiliated at all with the board, just trying to use it with a recent version of u-boot (and linux). Unfortunately it gets stuck in a reset loop (I wasn't able to nail down why, but it was definitely something in u-boot). However, I was able to successfully build u-boot using the xilinx fork here: https://github.com/Xilinx/u-boot-xlnx and have it work fine.
Interesting board - have to get a sample to be able to play with.
I've attached the patch I made to add minimal support for the red pitaya (SD boot only, no ethernet as it uses an unsupported lantiq chipset). It is the policy of the xilinx u-boot fork that board support should be pushed straight upstream, but I'm not sure if this is the right place seeing as the upstream version doesn't currently work. Could someone please give me some advice on what to do with this patch?
The reason why upstream version is not working for you is that you are probably running version without DTB that's why it is not initialized properly. It means you should load u-boot-dtb.bin instead.
XMD script for example connect arm hw -debugdevice cpunr 1 dow -data u-boot-dtb.bin 0x4000000 rwr pc 0x4000000 con exit
Then everything should just run correctly.
I have briefly looked at the code and the whole red pitaya code needs to be updated because it is pretty ancient old.
For pushing this to mainline you should revup DTB which targets 14.6 version which is pretty old too. That's why update to the latest&greatest needs to be done.
Thanks, Michal