Hi Ye,
On 11/09/2014 05:13, Ye.Li wrote:
Add clear print log to show pfuze200 or pfuze100 found on mx6sabresd.
Signed-off-by: Ye.Li B37916@freescale.com
Changes since v1:
- None
Changes since v2:
- None
board/freescale/mx6sabresd/mx6sabresd.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 5f65f1b..72d6562 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -472,7 +472,8 @@ static int pfuze_init(void) return ret;
pmic_reg_read(p, PFUZE100_DEVICEID, ®);
- printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
printf("PMIC: PFUZE%s ID=0x%02x\n",
((reg & 0xf) == 0) ? "100" : "200", reg);/* Increase VGEN3 from 2.5 to 2.8V */ pmic_reg_read(p, PFUZE100_VGEN3VOL, ®);
This is completely unrelated to the series - it can be applied independently from the other patches. You do not need to resend this one but please send in future patches belonging to the same series if they are related to the same issue or to the same set of issues. This simplifies review and merging - thanks !
Acked-by: Stefano Babic sbabic@denx.de
Best regards, Stefano Babic