Acked-by: Lauri Hintsala <lauri.hintsala@silabs.commailto:lauri.hintsala@silabs.com>
On 9 Feb 2021, at 15.02, Tom Rini <trini@konsulko.commailto:trini@konsulko.com> wrote:
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it.
Cc: Lauri Hintsala <lauri.hintsala@bluegiga.commailto:lauri.hintsala@bluegiga.com> Signed-off-by: Tom Rini <trini@konsulko.commailto:trini@konsulko.com> --- arch/arm/mach-imx/mxs/Kconfig | 4 - board/bluegiga/apx4devkit/Kconfig | 15 --- board/bluegiga/apx4devkit/MAINTAINERS | 6 - board/bluegiga/apx4devkit/Makefile | 10 -- board/bluegiga/apx4devkit/apx4devkit.c | 142 ----------------------- board/bluegiga/apx4devkit/spl_boot.c | 152 ------------------------- configs/apx4devkit_defconfig | 50 -------- include/configs/apx4devkit.h | 77 ------------- 8 files changed, 456 deletions(-) delete mode 100644 board/bluegiga/apx4devkit/Kconfig delete mode 100644 board/bluegiga/apx4devkit/MAINTAINERS delete mode 100644 board/bluegiga/apx4devkit/Makefile delete mode 100644 board/bluegiga/apx4devkit/apx4devkit.c delete mode 100644 board/bluegiga/apx4devkit/spl_boot.c delete mode 100644 configs/apx4devkit_defconfig delete mode 100644 include/configs/apx4devkit.h
diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig index 6a6e6ebecf0b..40d74c93b305 100644 --- a/arch/arm/mach-imx/mxs/Kconfig +++ b/arch/arm/mach-imx/mxs/Kconfig @@ -8,9 +8,6 @@ choice prompt "MX28 board select" optional
-config TARGET_APX4DEVKIT - bool "Support apx4devkit" - config TARGET_BG0900 bool "Support bg0900"
@@ -28,7 +25,6 @@ endchoice config SYS_SOC default "mxs"
-source "board/bluegiga/apx4devkit/Kconfig" source "board/liebherr/xea/Kconfig" source "board/ppcag/bg0900/Kconfig" source "board/schulercontrol/sc_sps_1/Kconfig" diff --git a/board/bluegiga/apx4devkit/Kconfig b/board/bluegiga/apx4devkit/Kconfig deleted file mode 100644 index f327fa15cf07..000000000000 --- a/board/bluegiga/apx4devkit/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_APX4DEVKIT - -config SYS_BOARD - default "apx4devkit" - -config SYS_VENDOR - default "bluegiga" - -config SYS_SOC - default "mxs" - -config SYS_CONFIG_NAME - default "apx4devkit" - -endif diff --git a/board/bluegiga/apx4devkit/MAINTAINERS b/board/bluegiga/apx4devkit/MAINTAINERS deleted file mode 100644 index 286e9e9f063e..000000000000 --- a/board/bluegiga/apx4devkit/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -APX4DEVKIT BOARD -M: Lauri Hintsala <lauri.hintsala@bluegiga.commailto:lauri.hintsala@bluegiga.com> -S: Maintained -F: board/bluegiga/apx4devkit/ -F: include/configs/apx4devkit.h -F: configs/apx4devkit_defconfig diff --git a/board/bluegiga/apx4devkit/Makefile b/board/bluegiga/apx4devkit/Makefile deleted file mode 100644 index 039d62dda2ad..000000000000 --- a/board/bluegiga/apx4devkit/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.demailto:wd@denx.de. - -ifndef CONFIG_SPL_BUILD -obj-y := apx4devkit.o -else -obj-y := spl_boot.o -endif diff --git a/board/bluegiga/apx4devkit/apx4devkit.c b/board/bluegiga/apx4devkit/apx4devkit.c deleted file mode 100644 index 739f71f5c4d1..000000000000 --- a/board/bluegiga/apx4devkit/apx4devkit.c +++ /dev/null @@ -1,142 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Bluegiga APX4 Development Kit - * - * Copyright (C) 2012 Bluegiga Technologies Oy - * - * Authors: - * Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.commailto:veli-pekka.peltola@bluegiga.com> - * Lauri Hintsala <lauri.hintsala@bluegiga.commailto:lauri.hintsala@bluegiga.com> - * - * Based on m28evk.c: - * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.commailto:marek.vasut@gmail.com> - * on behalf of DENX Software Engineering GmbH - */ - -#include <common.h> -#include <init.h> -#include <net.h> -#include <asm/gpio.h> -#include <asm/io.h> -#include <asm/setup.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/iomux-mx28.h> -#include <asm/arch/clock.h> -#include <asm/arch/sys_proto.h> -#include <env.h> -#include <linux/mii.h> -#include <miiphy.h> -#include <netdev.h> -#include <errno.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* Functions */ -int board_early_init_f(void) -{ - /* IO0 clock at 480MHz */ - mxs_set_ioclk(MXC_IOCLK0, 480000); - /* IO1 clock at 480MHz */ - mxs_set_ioclk(MXC_IOCLK1, 480000); - - /* SSP0 clock at 96MHz */ - mxs_set_sspclk(MXC_SSPCLK0, 96000, 0); - - return 0; -} - -int dram_init(void) -{ - return mxs_dram_init(); -} - -int board_init(void) -{ - /* Adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - return 0; -} - -#ifdef CONFIG_CMD_MMC -int board_mmc_init(struct bd_info *bis) -{ - return mxsmmc_initialize(bis, 0, NULL, NULL); -} -#endif - - -#ifdef CONFIG_CMD_NET - -#define MII_PHY_CTRL2 0x1f -int fecmxc_mii_postcall(int phy) -{ - /* change PHY RMII clock to 50MHz */ - miiphy_write("FEC", 0, MII_PHY_CTRL2, 0x8180); - - return 0; -} - -int board_eth_init(struct bd_info *bis) -{ - int ret; - struct eth_device *dev; - - ret = cpu_eth_init(bis); - if (ret) { - printf("FEC MXS: Unable to init FEC clocks\n"); - return ret; - } - - ret = fecmxc_initialize(bis); - if (ret) { - printf("FEC MXS: Unable to init FEC\n"); - return ret; - } - - dev = eth_get_dev_by_name("FEC"); - if (!dev) { - printf("FEC MXS: Unable to get FEC device entry\n"); - return -EINVAL; - } - - ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall); - if (ret) { - printf("FEC MXS: Unable to register FEC MII postcall\n"); - return ret; - } - - return ret; -} -#endif - -#ifdef CONFIG_SERIAL_TAG -#define MXS_OCOTP_MAX_TIMEOUT 1000000 -void get_board_serial(struct tag_serialnr *serialnr) -{ - struct mxs_ocotp_regs *ocotp_regs = - (struct mxs_ocotp_regs *)MXS_OCOTP_BASE; - - serialnr->high = 0; - serialnr->low = 0; - - writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set); - - if (mxs_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY, - MXS_OCOTP_MAX_TIMEOUT)) { - printf("MXS: Can't get serial number from OCOTP\n"); - return; - } - - serialnr->low = readl(&ocotp_regs->hw_ocotp_cust3); -} -#endif - -#ifdef CONFIG_REVISION_TAG -u32 get_board_rev(void) -{ - if (env_get("revision#") != NULL) - return simple_strtoul(env_get("revision#"), NULL, 10); - return 0; -} -#endif diff --git a/board/bluegiga/apx4devkit/spl_boot.c b/board/bluegiga/apx4devkit/spl_boot.c deleted file mode 100644 index e5d5c4637b0c..000000000000 --- a/board/bluegiga/apx4devkit/spl_boot.c +++ /dev/null @@ -1,152 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Bluegiga APX4 Development Kit - * - * Copyright (C) 2012 Bluegiga Technologies Oy - * - * Authors: - * Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.commailto:veli-pekka.peltola@bluegiga.com> - * Lauri Hintsala <lauri.hintsala@bluegiga.commailto:lauri.hintsala@bluegiga.com> - * - * Based on spl_boot.c: - * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.commailto:marek.vasut@gmail.com> - * on behalf of DENX Software Engineering GmbH - */ - -#include <common.h> -#include <config.h> -#include <asm/gpio.h> -#include <asm/io.h> -#include <asm/arch/iomux-mx28.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/sys_proto.h> - -#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) -#define MUX_CONFIG_GPMI (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) -#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) -#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL) - -const iomux_cfg_t iomux_setup[] = { - /* DUART */ - MX28_PAD_PWM0__DUART_RX, - MX28_PAD_PWM1__DUART_TX, - - /* LED */ - MX28_PAD_PWM3__GPIO_3_28, - - /* MMC0 */ - MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0, - MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0, - MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0, - MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0, - MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0, - MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | - (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_NOPULL), - MX28_PAD_SSP0_SCK__SSP0_SCK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - - /* GPMI NAND */ - MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI, - MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI, - MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI, - MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI, - MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI, - MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI, - MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI, - MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI, - MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI, - MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI, - MX28_PAD_GPMI_RDN__GPMI_RDN | - (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP), - MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI, - MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI, - MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI, - MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI, - - /* FEC0 */ - MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET, - MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET, - MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET, - MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET, - MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET, - MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET, - MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET, - MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET, - MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET, - - /* I2C */ - MX28_PAD_I2C0_SCL__I2C0_SCL, - MX28_PAD_I2C0_SDA__I2C0_SDA, - - /* EMI */ - MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI, - MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI, - MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI, - MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI, - MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI, - MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI, - MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI, - MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI, - MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI, - MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI, - MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI, - MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI, - MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI, - MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI, - MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI, - MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI, - MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI, - MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI, - MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI, - MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI, - MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI, - MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI, - MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI, - MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI, - MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI, - - MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI, - MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI, - MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI, - MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI, - MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI, - MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI, - MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI, - MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI, - MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI, - MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI, - MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI, - MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI, - MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI, - MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI, - MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI, - MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI, - MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI, - MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI, - MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI, - MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI, - MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI, - MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI, - MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI, - MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI, -}; - -void board_init_ll(const uint32_t arg, const uint32_t *resptr) -{ - mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup)); - - /* switch LED on */ - gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0); -} - -void mxs_adjust_memory_params(uint32_t *dram_vals) -{ - /* - * All address lines are routed from CPU to memory chip. - * ADDR_PINS field is set to zero. - */ - dram_vals[0x74 >> 2] = 0x0f02000a; - - /* Used memory has 4 banks. EIGHT_BANK_MODE bit is disabled. */ - dram_vals[0x7c >> 2] = 0x00000101; -} diff --git a/configs/apx4devkit_defconfig b/configs/apx4devkit_defconfig deleted file mode 100644 index 2ada946e5281..000000000000 --- a/configs/apx4devkit_defconfig +++ /dev/null @@ -1,50 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX28=y -CONFIG_SYS_TEXT_BASE=0x40002000 -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_OFFSET=0x120000 -CONFIG_SPL_TEXT_BASE=0x00001000 -CONFIG_TARGET_APX4DEVKIT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_ENV_OFFSET_REDUND=0x180000 -CONFIG_BOOTDELAY=1 -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_ARCH_MISC_INIT=y -CONFIG_BOARD_EARLY_INIT_F=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_HUSH_PARSER=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand" -CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:128k(bootstrap),1024k(boot),768k(env),-(root)" -CONFIG_CMD_UBI=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_VERSION_VARIABLE=y -CONFIG_MXS_GPIO=y -CONFIG_MMC_MXS=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_MXS=y -CONFIG_MII=y -CONFIG_CONS_INDEX=0 -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h deleted file mode 100644 index bcd55bb8689e..000000000000 --- a/include/configs/apx4devkit.h +++ /dev/null @@ -1,77 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2012 Bluegiga Technologies Oy - * - * Authors: - * Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.commailto:veli-pekka.peltola@bluegiga.com> - * Lauri Hintsala <lauri.hintsala@bluegiga.commailto:lauri.hintsala@bluegiga.com> - * - * Based on m28evk.h: - * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.commailto:marek.vasut@gmail.com> - * on behalf of DENX Software Engineering GmbH - */ -#ifndef __CONFIGS_APX4DEVKIT_H__ -#define __CONFIGS_APX4DEVKIT_H__ - -/* System configurations */ -#define CONFIG_MACH_TYPE MACH_TYPE_APX4DEVKIT - -/* Memory configuration */ -#define PHYS_SDRAM_1 0x40000000 /* Base address */ -#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - -/* Environment is in NAND */ -#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_ENV_RANGE (384 * 1024) -#endif - -/* UBI and NAND partitioning */ - -/* FEC Ethernet on SoC */ -#ifdef CONFIG_CMD_NET -#define CONFIG_FEC_MXC -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 0 -#define IMX_FEC_BASE MXS_ENET0_BASE -#endif - -/* USB */ -#ifdef CONFIG_CMD_USB -#define CONFIG_EHCI_MXS_PORT1 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#endif - -/* Boot Linux */ -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTCOMMAND "run bootcmd_nand" -#define CONFIG_LOADADDR 0x41000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SERIAL_TAG -#define CONFIG_REVISION_TAG - -/* Extra Environments */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "verify=no\0" \ - "bootcmd=run bootcmd_nand\0" \ - "kernelargs=console=tty0 console=ttyAMA0,115200 consoleblank=0\0" \ - "bootargs_nand=" \ - "setenv bootargs ${kernelargs} ubi.mtd=3,2048 " \ - "root=ubi0:rootfs rootfstype=ubifs ${mtdparts} rw\0" \ - "bootcmd_nand=" \ - "run bootargs_nand && ubi part root 2048 && " \ - "ubifsmount ubi:rootfs && ubifsload 41000000 boot/uImage && " \ - "bootm 41000000\0" \ - "bootargs_mmc=" \ - "setenv bootargs ${kernelargs} " \ - "root=/dev/mmcblk0p2 rootwait ${mtdparts} rw\0" \ - "bootcmd_mmc=" \ - "run bootargs_mmc && mmc rescan && " \ - "ext2load mmc 0:2 41000000 boot/uImage && bootm 41000000\0" \ -"" - -/* The rest of the configuration is shared */ -#include <configs/mxs.h> - -#endif /* __CONFIGS_APX4DEVKIT_H__ */ -- 2.17.1