On Fri, Nov 3, 2023 at 7:47 PM Fabio Estevam festevam@gmail.com wrote:
From: Fabio Estevam festevam@denx.de
With Ethernet DM in place, there is no longer the need for having the board_phy_config() anymore.
Remove it.
Tested on imx7d-pico-pi board:
=> setenv autoload no => dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 42 DHCP client bound to address 192.168.0.138 (138 ms) => tftp zImage Using ethernet@30be0000 device TFTP from server 192.168.0.16; our IP address is 192.168.0.138 Filename 'zImage'. Load address: 0x80800000 Loading: ################################################################# .... ################################################################# ########## 4.3 MiB/s done Bytes transferred = 9034120 (89d988 hex)
Signed-off-by: Fabio Estevam festevam@denx.de
Applied to u-boot-imx next, thanks.