[U-Boot] [PATCH 1/2] net: gem: Check if phy was correctly detected

3 Jan 2014

As tsec and fm drivers checking phydev->link
ensure that u-boot don't try access device if link is not ready.
Signed-off-by: Michal Simek michal.simek@xilinx.com
---
drivers/net/zynq_gem.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 6a017a8..381bca4 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -339,6 +339,11 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
    phy_config(phydev);
    phy_startup(phydev);
+	if (!phydev->link) {
+		printf("%s: No link.\n", phydev->dev->name);
+		return -1;
+	}
+
    switch (phydev->speed) {
    case SPEED_1000:
    	writel(ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED1000,
--
1.8.2.3

    