
Copied over the fixed PHY driver as used in pp4xx/4xx_enet.c. This adds support for PHY-less MAC connections to the UEC.
Signed-off-by: Richard Retanubun RichardRetanubun@RuggedCom.com --- Documentation change only: Same patch as before, now with a board configuration file example that actually applies to UEC based boards :)
drivers/qe/uec_phy.c | 78 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 78 insertions(+), 0 deletions(-)
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c index 2243d3b..b64748b 100644 --- a/drivers/qe/uec_phy.c +++ b/drivers/qe/uec_phy.c @@ -44,6 +44,53 @@ #define ugphy_vdbg(ugeth, fmt, args...) do { } while (0) #endif /* UEC_VERBOSE_DEBUG */
+/*--------------------------------------------------------------------+ + * Fixed PHY (PHY-less) support for Ethernet Ports. + * + * Adapted from cpu/ppc4xx/4xx_enet.c + *--------------------------------------------------------------------*/ + +/* + * Some boards do not have a PHY for each ethernet port. These ports + * are known as Fixed PHY (or PHY-less) ports. For such ports, + * define CONFIG_SYS_FIXED_PHY_PORTS to define what the speed and + * duplex should be for these ports in the board configuration file. + * + * Example board configuration file: + * + * #define CONFIG_FIXED_PHY 0xFFFFFFFF + * + * #define CONFIG_SYS_UEC1_PHY_ADDR 0 <- PHY-less port + * #define CONFIG_SYS_UEC2_PHY_ADDR 1 + * #define CONFIG_SYS_UEC3_PHY_ADDR 2 <- PHY-less port + * #define CONFIG_SYS_UEC4_PHY_ADDR 3 + * + * #define CONFIG_SYS_FIXED_PHY_PORT(devnum,speed,duplex) \ + * {devnum, speed, duplex}, + * + * #define CONFIG_SYS_FIXED_PHY_PORTS \ + * CONFIG_SYS_FIXED_PHY_PORT(0, SPEED_1000, DUPLEX_FULL) \ + * CONFIG_SYS_FIXED_PHY_PORT(2, SPEED_100, DUPLEX_HALF) + */ + +#ifndef CONFIG_FIXED_PHY +#define CONFIG_FIXED_PHY 0xFFFFFFFF /* Fixed PHY (PHY-less) */ +#endif + +#ifndef CONFIG_SYS_FIXED_PHY_PORTS +#define CONFIG_SYS_FIXED_PHY_PORTS /* default is an empty array */ +#endif + +struct fixed_phy_port { + unsigned int devnum; /* ethernet port */ + unsigned int speed; /* specified speed 10,100 or 1000 */ + unsigned int duplex; /* specified duplex FULL or HALF */ +}; + +static const struct fixed_phy_port fixed_phy_port[] = { + CONFIG_SYS_FIXED_PHY_PORTS /* defined in board configuration file */ +}; + static void config_genmii_advert (struct uec_mii_info *mii_info); static void genmii_setup_forced (struct uec_mii_info *mii_info); static void genmii_restart_aneg (struct uec_mii_info *mii_info); @@ -533,6 +580,28 @@ static void dm9161_close (struct uec_mii_info *mii_info) { }
+static int fixed_phy_aneg (struct uec_mii_info *mii_info) +{ + mii_info->autoneg = 0; /* Turn off auto negotiation for fixed phy */ + return 0; +} + +static int fixed_phy_read_status (struct uec_mii_info *mii_info) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(fixed_phy_port); i++) { + if (mii_info->mii_id == fixed_phy_port[i].devnum) { + mii_info->speed = fixed_phy_port[i].speed; + mii_info->duplex = fixed_phy_port[i].duplex; + mii_info->link = 1; /* Link is always UP */ + mii_info->pause = 0; + break; + } + } + return 0; +} + static struct phy_info phy_info_dm9161 = { .phy_id = 0x0181b880, .phy_id_mask = 0x0ffffff0, @@ -577,6 +646,14 @@ static struct phy_info phy_info_bcm5481 = { .init = bcm_init, };
+static struct phy_info phy_info_fixedphy = { + .phy_id = CONFIG_FIXED_PHY, + .phy_id_mask = CONFIG_FIXED_PHY, + .name = "Fixed PHY", + .config_aneg = fixed_phy_aneg, + .read_status = fixed_phy_read_status, +}; + static struct phy_info phy_info_genmii = { .phy_id = 0x00000000, .phy_id_mask = 0x00000000, @@ -591,6 +668,7 @@ static struct phy_info *phy_info[] = { &phy_info_dm9161a, &phy_info_marvell, &phy_info_bcm5481, + &phy_info_fixedphy, &phy_info_genmii, NULL };