Hi Georgi,
On 4 September 2018 at 07:34, Georgii Staroselskii georgii.staroselskii@emlid.com wrote:
This API is going to be used to configure some pins that are protected for simple modification.
It's not a comprehensive pinctrl driver but can be turned into one when we need this in the future. Now it is planned to be used only in one place. So that's why I decided not to pollute the codebase with a full-blown pinctrl-merrifield nobody will use.
This driver reads corresponding fields in DT and configures pins accordingly.
The "protected" flag is used to distinguish configuration of SCU-owned pins from the ordinary ones.
The code has been adapted from Linux work done by Andy Shevchenko in pinctrl-merrfifield.c
Signed-off-by: Georgii Staroselskii georgii.staroselskii@emlid.com
arch/x86/cpu/tangier/Makefile | 2 +- arch/x86/cpu/tangier/pinmux.c | 196 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 197 insertions(+), 1 deletion(-) create mode 100644 arch/x86/cpu/tangier/pinmux.c
Please can you use the livetree API (dev_read_...)?
Regards, Simon