The defconfig file name for StarFive VisionFive2 has been changed, and the documentation description has also changed.
Signed-off-by: Yanhong Wang yanhong.wang@starfivetech.com --- doc/board/starfive/visionfive2.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/doc/board/starfive/visionfive2.rst b/doc/board/starfive/visionfive2.rst index 22d2a31ff5..a2374486b5 100644 --- a/doc/board/starfive/visionfive2.rst +++ b/doc/board/starfive/visionfive2.rst @@ -60,7 +60,7 @@ Now build the U-Boot SPL and U-Boot proper .. code-block:: console
cd <U-Boot-dir> - make starfive_visionfive2_13b_defconfig + make starfive_visionfive2_defconfig make OPENSBI=$(opensbi_dir)/opensbi/build/platform/generic/firmware/fw_dynamic.bin
This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb) @@ -111,7 +111,7 @@ Program the SD card sudo cp u-boot.itb /mnt/ sudo cp Image.gz /mnt/ sudo cp initramfs.cpio.gz /mnt/ - sudo cp jh7110-starfive-visionfive-2-v1.3b.dtb /mnt/ + sudo cp jh7110-starfive-visionfive-2.dtb /mnt/ sudo umount /mnt
Booting @@ -255,7 +255,7 @@ Sample boot log from StarFive VisionFive2 board
StarFive #fatload mmc 1:3 ${kernel_addr_r} Image.gz 6429424 bytes read in 394 ms (15.6 MiB/s) - StarFive #fatload mmc 1:3 ${fdt_addr_r} jh7110-starfive-visionfive-2-v1.3b.dtb + StarFive #fatload mmc 1:3 ${fdt_addr_r} jh7110-starfive-visionfive-2.dtb 11285 bytes read in 5 ms (2.2 MiB/s) StarFive #fatload mmc 1:3 ${ramdisk_addr_r} initramfs.cpio.gz 152848495 bytes read in 9271 ms (15.7 MiB/s)