At this point all the USB keyboards I had laying around now work and I can USB boot the rpi3 and rpi4, so perhaps this series can move beyond the RFC stage. More testing will occur over the next week or so.
v3: - Add in patch 6 - Finally got the GearHead keyboard + mouse composite USB device working
v2: - Minor cleanups to patches 1-3 based on prior review - Patch 4 & 5 are new to fix various xhchi crashes while having additional devices plugged in along with booting off the usb port. The nonblocking mode turned out to be somewhat complex.
v1:
For testing this patch series, I did apply the USB patches for the rpi4 board which had not been merged yet. Once the rpi4 USB changes are eventually merged the keyboard delay issues will show up and I imagine this issue is already a problem for other boards. This series does not depend on rpi4 patches as the changes are in the core USB functions.
I performed tests with a number of usb modules attached including storage, ethernet, serial, wifi, keyboard, and mouse without any issues.
---------------------------------------------------------------- Jason Wessel (6): xhci: Add polling support for USB keyboards usb_kbd: Do not fail the keyboard if it does not have an interrupt pending common/usb.c: Work around keyboard reporting "USB device not accepting new address" xhci-ring.c: Add the poll_pend state to properly abort transactions xhci-ring: Fix crash when issuing "usb reset" usb.c: Add a retry in the usb_prepare_device()
common/usb.c | 18 +++++++++--- common/usb_kbd.c | 4 ++- drivers/usb/host/xhci-ring.c | 123 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------ drivers/usb/host/xhci.c | 11 ++++---- include/usb/xhci.h | 5 ++-- 5 files changed, 122 insertions(+), 39 deletions(-)