board/freescale/mx8mq_evk/README has been introduced by mistake in commit d0dd73974c61 ("imx: add i.MX8QXP MEK board support")
Remove it for now as this should be introduced when mx8mq_evk support is in place.
Reported-by: Tim Harvey tharvey@gateworks.com Signed-off-by: Fabio Estevam festevam@gmail.com --- board/freescale/mx8mq_evk/README | 81 ---------------------------------------- 1 file changed, 81 deletions(-) delete mode 100644 board/freescale/mx8mq_evk/README
diff --git a/board/freescale/mx8mq_evk/README b/board/freescale/mx8mq_evk/README deleted file mode 100644 index cd7e67e..0000000 --- a/board/freescale/mx8mq_evk/README +++ /dev/null @@ -1,81 +0,0 @@ -U-Boot for the NXP i.MX8MQ EVK board - -Quick Start -=========== - -- Build U-Boot -- Build the ARM Trusted firmware binary -- Get DDR firmware and mkimage tool -- Generate flash.bin using imx-mkimage -- Flash the binary into the SD card -- Boot - -Build U-Boot -============ - -$ make mx8mq_evk_defconfig -$ make - -Get and Build the ARM Trusted firmware -====================================== - -$ git clone https://source.codeaurora.org/external/imx/imx-atf -$ cd imx-atf/ -$ git checkout origin/imx_4.9.51_imx8m_beta -$ make PLAT=imx8mq bl31 - -Get the DDR firmware and mkimage tool -============================== - -$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.2.bin -$ chmod +x firmware-imx-7.2.bin -$ ./firmware-imx-7.2.bin - -Download the imx-mkimage tool: - -$ git clone https://source.codeaurora.org/external/imx/imx-mkimage/ -$ cd imx-mkimage/ -$ git checkout origin/imx_4.9.51_imx8m_beta - - -Generate flash.bin using imx-mkimage -==================================== - -Copy the following binaries to imx-mkimage/iMX8M folder: - -$ cp imx-atf/build/imx8mq/release/bl31.bin imx-mkimage/iMX8M/ -$ cp u-boot/u-boot-nodtb.bin imx-mkimage/iMX8M/ -$ cp u-boot/spl/u-boot-spl.bin imx-mkimage/iMX8M/ -$ cp u-boot/arch/arm/dts/fsl-imx8mq-evk.dtb imx-mkimage/iMX8M/ - -Copy the following firmwares to imx-mkimage/iMX8 folder : - -$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem.bin imx-mkimage/iMX8M/ -$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem.bin imx-mkimage/iMX8M/ -$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem.bin imx-mkimage/iMX8M/ -$ cp firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem.bin imx-mkimage/iMX8M/ - -If you want to run with HDMI, copy signed_hdmi_imx8m.bin to imx-mkimage/iMX8M. - -Before generating the flash.bin, transfer the mkimage generated by U-Boot to iMX8M folder: - -$ cp u-boot/tools/mkimage imx-mkimage/iMX8M/ -$ mv imx-mkimage/iMX8M/mkimage imx-mkimage/iMX8M/mkimage_uboot - -$ cd imx-mkimage/ -$ make SOC=iMX8M flash_spl_uboot - -Or for using HDMI: - -$ make SOC=iMX8M flash_hdmi_spl_uboot - -Flash the binary into the SD card -================================= - -Burn the flash.bin binary to SD card offset 33KB: - -$ sudo dd if=iMX8M/flash.bin of=/dev/sd[x] bs=1024 seek=33 - -Boot -==== -Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.