The omap5912-osk board is using a RAM based address as the linker location for code. This is causing several problems when attempting to run the latest u-boot code base on this board from flash. Update the default linker location for code to be in NOR flash at address 0x00000000.
The omap5912-osk board only has 32MB of RAM and so fix the comment in the omap5912-osk config.mk file as well.
Signed-off-by: Jon Hunter jon-hunter@ti.com --- board/ti/omap5912osk/config.mk | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/board/ti/omap5912osk/config.mk b/board/ti/omap5912osk/config.mk index 0ed7d8a..5b8d952 100644 --- a/board/ti/omap5912osk/config.mk +++ b/board/ti/omap5912osk/config.mk @@ -14,17 +14,17 @@ # TI OSK board with OMAP5912 (ARM925EJS) cpu # see http://www.ti.com/ for more information on Texas Instruments # -# OSK has 1 bank of 256 MB SDRAM +# OSK has 1 bank of 32 MB SDRAM # Physical Address: -# 1000'0000 to 2000'0000 +# 1000'0000 to 1200'0000 # # # Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 # (mem base + reserved) # -# we load ourself to 1108'0000 +# When running from RAM use address 1108'0000, otherwise when +# booting from NOR flash link to address 0000'0000. # -# -
-CONFIG_SYS_TEXT_BASE = 0x11080000 +CONFIG_SYS_TEXT_BASE = 0x00000000 +#CONFIG_SYS_TEXT_BASE = 0x11080000