Use the same prop as linux to control the use of fifo or dma mode. Also add a u-boot,spl-sfc-no-dma prop to control the same in SPL.
Signed-off-by: Jonas Karlman jonas@kwiboo.se --- drivers/spi/rockchip_sfc.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/rockchip_sfc.c b/drivers/spi/rockchip_sfc.c index 851a6482985b..1c26802c618e 100644 --- a/drivers/spi/rockchip_sfc.c +++ b/drivers/spi/rockchip_sfc.c @@ -227,10 +227,12 @@ static int rockchip_sfc_ofdata_to_platdata(struct udevice *bus) struct rockchip_sfc *sfc = dev_get_plat(bus);
sfc->regbase = dev_read_addr_ptr(bus); - if (ofnode_read_bool(dev_ofnode(bus), "sfc-no-dma")) - sfc->use_dma = false; - else - sfc->use_dma = true; + sfc->use_dma = !dev_read_bool(bus, "rockchip,sfc-no-dma"); + +#ifdef CONFIG_SPL_BUILD + if (sfc->use_dma) + sfc->use_dma = !dev_read_bool(bus, "u-boot,spl-sfc-no-dma"); +#endif
#if CONFIG_IS_ENABLED(CLK) int ret;