[PATCH 0/2] sunxi: Support UART1 and UART2 on the T113

The T113 supports UART1 and UART2 on PG and PD pins respectively. Add support for these in U-Boot so we can use them.

Note: I'm not entirely sure if the PD pins should be default, they overlap with the LCD pins. I am however using this on a real board.

Signed-off-by: John Watts contact@jookia.org --- John Watts (2): sunxi: Support UART1 on the T113 sunxi: Support UART2 on the T113

arch/arm/mach-sunxi/board.c | 9 +++++++-- include/sunxi_gpio.h | 1 + 2 files changed, 8 insertions(+), 2 deletions(-) --- base-commit: 777c28460947371ada40868dc994dfe8537d7115 change-id: 20240411-t113serial-a6e9ca8d8848

Best regards,