This one too.
On Tue, Dec 2, 2014 at 8:49 AM, Mark Tomlinson mark.tomlinson@alliedtelesis.co.nz wrote:
"diconnect" and "disconnet" should both be "disconnect".
Signed-off-by: Mark Tomlinson mark.tomlinson@alliedtelesis.co.nz
drivers/i2c/i2c_core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/i2c_core.c b/drivers/i2c/i2c_core.c index 4539667..41cc3b8 100644 --- a/drivers/i2c/i2c_core.c +++ b/drivers/i2c/i2c_core.c @@ -174,7 +174,7 @@ static int i2c_mux_set_all(void) return 0; }
-static int i2c_mux_disconnet_all(void) +static int i2c_mux_disconnect_all(void) { struct i2c_bus_hose *i2c_bus_tmp = &i2c_bus[I2C_BUS]; int i; @@ -197,7 +197,7 @@ static int i2c_mux_disconnet_all(void)
ret = I2C_ADAP->write(I2C_ADAP, chip, 0, 0, &buf, 1); if (ret != 0) {
printf("i2c: mux diconnect error\n");
printf("i2c: mux disconnect error\n"); return ret; } } while (i > 0);@@ -293,7 +293,7 @@ int i2c_set_bus_num(unsigned int bus) }
#ifndef CONFIG_SYS_I2C_DIRECT_BUS
i2c_mux_disconnet_all();
i2c_mux_disconnect_all();#endif
gd->cur_i2c_bus = bus;-- 1.9.1
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot