From: Jagan Teki jagan@amarulasolutions.com
Compared to previous series, this series has full possible dts support for SabreSD DualLite, Quad and Quad Plus.
The main intention of this series is to add the dts node step by step and remove the legacy code at the end and to make the full functional dts.
Still, need to add DCD code for Duallite and will add it in next version series.
Changes for v2: - rebase on master - Added new-patches.
Log: ---- U-Boot SPL 2017.03-33713-g76a5404 (Apr 03 2017 - 19:09:15) Trying to boot from MMC1
U-Boot 2017.03-33713-g76a5404 (Apr 03 2017 - 19:09:15 +0530)
CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C) at 43C Reset cause: POR Model: Freescale i.MX6 Quad Plus SABRE Smart Device Board Board: MX6-SabreSD DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 PCI: pcie phy link never came up No panel detected: default to Hannstar-XGA Display: Hannstar-XGA (1024x768) In: serial Out: serial Err: serial Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 0 => dm tree Class Probed Name ---------------------------------------- root [ + ] root_driver thermal [ ] |-- imx_thermal simple_bus [ + ] `-- soc simple_bus [ + ] |-- aips-bus@02000000 simple_bus [ ] | |-- spba-bus@02000000 gpio [ + ] | |-- gpio@0209c000 gpio [ + ] | |-- gpio@020a0000 gpio [ + ] | |-- gpio@020a4000 gpio [ + ] | |-- gpio@020a8000 gpio [ + ] | |-- gpio@020ac000 gpio [ + ] | |-- gpio@020b0000 gpio [ + ] | |-- gpio@020b4000 simple_bus [ ] | |-- anatop@020c8000 simple_bus [ ] | |-- snvs@020cc000 pinctrl [ + ] | `-- iomuxc@020e0000 pinconfig [ + ] | `-- imx6qdl-sabresd pinconfig [ + ] | |-- enetgrp pinconfig [ ] | |-- i2c1grp pinconfig [ ] | |-- i2c2grp pinconfig [ ] | |-- i2c3grp pinconfig [ ] | |-- uart1grp pinconfig [ ] | |-- usbotggrp pinconfig [ + ] | |-- usdhc2grp pinconfig [ + ] | |-- usdhc3grp pinconfig [ + ] | `-- usdhc4grp simple_bus [ + ] `-- aips-bus@02100000 usb [ ] |-- usb@02184000 usb [ ] |-- usb@02184200 eth [ + ] |-- ethernet@02188000 mmc [ + ] |-- usdhc@02194000 mmc [ + ] |-- usdhc@02198000 mmc [ + ] |-- usdhc@0219c000 i2c [ ] |-- i2c@021a0000 i2c [ ] |-- i2c@021a4000 pmic [ ] | `-- pfuze100@08 i2c [ ] `-- i2c@021a8000
Tested: UART, MMC, I2C, FEC(with basic ping)
thanks! Jagan.
Jagan Teki (29): ARM: i.MX6: sabresd: Fix README - s/of=/dev/sdbbs=1K/of=/dev/sdb bs=1K/ ARM: dts: i.MX6: Add imx6qdl-sabresd.dtsi ARM: dts: imx6qdl-sabresd: Add imx6q-sabresd.dts ARM: i.MX6: sabresd: Remove SPL_I2C_SUPPORT ARM: i.MX6Q: sabresd: Add initial devicetree support ARM: dts: imx6qdl-sabresd: Add imx6qp-sabresd.dts ARM: i.MX6QP: sabresd: Add initial devicetree support ARM: i.MX6: sabresd: Move CONFIG_SYS_I2C_MXC to defconfigs ARM: dts: imx6qdl-sabresd: Add I2C node's ARM: dts: imx6qdl-sabresd: Add PMIC pfuze100 node ARM: i.MX6: sabresd: Enable DM_I2C and DM_PMIC ARM: i.MX6: sabresd: defconfig move - CONFIG_USB_EHCI(_MX6) ARM: dts: imx6qdl-sabresd: Add usb host node ARM: dts: imx6qdl-sabresd: Add usb otg node ARM: i.MX6: sabresd: Enable CONFIG_DM_REGULATOR ARM: i.MX6: sabresd: Enable DM_USB ARM: dts: imx6qdl-sabresd: Add FEC node ARM: i.MX6: sabresd: Move CONFIG_FEC_MXC to defconfigs ARM: i.MX6: sabresd: Enable DM_ETH ARM: i.MX6: sabresd: Add dm_gpio_* for backlight ARM: i.MX6: sabresd: Add imx6_pcie_toggle_power ARM: i.MX6: sabresd: Add imx6_pcie_toggle_reset ARM: dts: imx6qdl-sabresd: Add imx6dl-sabresd.dts ARM: i.MX6DL: sabresd: Add initial devicetree support ARM: i.MX6: sabresd: Drop legacy non-fdt code ARM: i.MX6: %s/mx6sabresd/imx6sabresd ARM: i.MX6: sabresd: Move DM_* and OF_CONTROL to arch Kconfig ARM: i.MX6: sabresd: Update README ARM: i.MX6: sabresd: Drop checkboard
arch/arm/cpu/armv7/mx6/Kconfig | 10 +- arch/arm/dts/Makefile | 3 + arch/arm/dts/imx6dl-sabresd.dts | 17 + arch/arm/dts/imx6q-sabresd.dts | 21 + arch/arm/dts/imx6qdl-sabresd.dtsi | 235 +++++++++ arch/arm/dts/imx6qp-sabresd.dts | 85 ++++ .../freescale/{mx6sabresd => imx6sabresd}/Kconfig | 4 +- board/freescale/imx6sabresd/MAINTAINERS | 8 + .../freescale/{mx6sabresd => imx6sabresd}/Makefile | 2 +- board/freescale/imx6sabresd/README | 84 ++++ .../mx6sabresd.c => imx6sabresd/imx6sabresd.c} | 538 ++++++++------------- board/freescale/mx6sabresd/MAINTAINERS | 8 - board/freescale/mx6sabresd/README | 103 ---- board/freescale/mx6sabresd/mx6dlsabresd.cfg | 131 ----- board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg | 169 ------- ...lsabresd_defconfig => imx6dl_sabresd_defconfig} | 26 +- ...bresd_spl_defconfig => imx6q_sabresd_defconfig} | 13 +- ...qsabresd_defconfig => imx6qp_sabresd_defconfig} | 28 +- include/configs/{mx6sabresd.h => imx6sabresd.h} | 25 +- include/configs/mx6sabre_common.h | 3 +- 20 files changed, 727 insertions(+), 786 deletions(-) create mode 100644 arch/arm/dts/imx6dl-sabresd.dts create mode 100644 arch/arm/dts/imx6q-sabresd.dts create mode 100644 arch/arm/dts/imx6qdl-sabresd.dtsi create mode 100644 arch/arm/dts/imx6qp-sabresd.dts rename board/freescale/{mx6sabresd => imx6sabresd}/Kconfig (70%) create mode 100644 board/freescale/imx6sabresd/MAINTAINERS rename board/freescale/{mx6sabresd => imx6sabresd}/Makefile (86%) create mode 100644 board/freescale/imx6sabresd/README rename board/freescale/{mx6sabresd/mx6sabresd.c => imx6sabresd/imx6sabresd.c} (79%) delete mode 100644 board/freescale/mx6sabresd/MAINTAINERS delete mode 100644 board/freescale/mx6sabresd/README delete mode 100644 board/freescale/mx6sabresd/mx6dlsabresd.cfg delete mode 100644 board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg rename configs/{mx6dlsabresd_defconfig => imx6dl_sabresd_defconfig} (59%) rename configs/{mx6sabresd_spl_defconfig => imx6q_sabresd_defconfig} (82%) rename configs/{mx6qsabresd_defconfig => imx6qp_sabresd_defconfig} (56%) rename include/configs/{mx6sabresd.h => imx6sabresd.h} (71%)