The previous version of this driver implemented a shell command to manually comfigure the switch. It did not integrate with the PHY infrastructure to allow a MAC to use it as its PHY. This is complete rewrite to allow this switch to function as a driver. Since none of the original driver remains, the old driver is first removed and the new PHY driver is added.
This version configures the switch to have a CPU connected over an MII interface. It will enable PHY interfaces based on the MV88E61XX_PHY_PORTS macro. The switch is configured to allow PHY ports to only communicate to the CPU. This allows the switch to be used as a basic PHY on any/all ports.
This was developed on a board with an mv88e6176 connected over SGMII. It is intended to work with other configurations, but these could not be tested. Any testing on other configurations or with other mv88e61xx chips is appreciated.
Signed-off-by: Kevin Smith kevin.smith@elecsyscorp.com Acked-by: Prafulla Wadaskar prafulla@marvell.com Cc: Joe Hershberger joe.hershberger@ni.com Cc: Stefan Roese sr@denx.de Cc: Marek Vasut marex@denx.de
Kevin Smith (2): net: Remove unused mv88e61xx switch driver net: phy: Add PHY driver for mv88e61xx switches
drivers/net/phy/mv88e61xx.c | 959 +++++++++++++++++++++++++------------------- drivers/net/phy/mv88e61xx.h | 61 --- drivers/net/phy/phy.c | 3 + include/netdev.h | 58 --- include/phy.h | 1 + 5 files changed, 547 insertions(+), 535 deletions(-) delete mode 100644 drivers/net/phy/mv88e61xx.h