In case NET networking is not enabled, it is not possible to compile the USB ethernet gadget. Protect the symbols in Makefile to avoid build failure. Such build failure may occur e.g. in case NET and USB ethernet gadget is enabled in U-Boot proper, but not in SPL.
Signed-off-by: Marek Vasut marex@denx.de --- Cc: Lukasz Majewski lukma@denx.de --- drivers/usb/gadget/Makefile | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 6cfe0f3a041..36f65e7eb95 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -34,8 +34,10 @@ endif
obj-$(CONFIG_CI_UDC) += ci_udc.o
+ifeq ($(CONFIG_$(SPL_TPL_)NET),y) obj-$(CONFIG_USB_ETHER) += ether.o obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o +endif
# Devices not related to the new gadget layer depend on CONFIG_USB_DEVICE # This is really only N900 and USBTTY now.