On Wed, 26 Feb 2020 18:15:44 +0100 Giulio Benetti giulio.benetti@benettiengineering.com wrote:
pllv3 PLLs have powerdown/up bits but enable bits too. Specifically "enable bit" enable the pll output, so when dis/enabling pll by setting/clearing power_bit we must also set/clear enable_bit.
Signed-off-by: Giulio Benetti giulio.benetti@benettiengineering.com
drivers/clk/imx/clk-pllv3.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c index 525442debf..b4a9d587e1 100644 --- a/drivers/clk/imx/clk-pllv3.c +++ b/drivers/clk/imx/clk-pllv3.c @@ -25,6 +25,7 @@ #define PLL_DENOM_OFFSET 0x20
#define BM_PLL_POWER (0x1 << 12) +#define BM_PLL_ENABLE (0x1 << 13) #define BM_PLL_LOCK (0x1 << 31)
struct clk_pllv3 { @@ -32,6 +33,7 @@ struct clk_pllv3 { void __iomem *base; u32 power_bit; bool powerup_set;
- u32 enable_bit; u32 div_mask; u32 div_shift;
}; @@ -83,6 +85,9 @@ static int clk_pllv3_generic_enable(struct clk *clk) val |= pll->power_bit; else val &= ~pll->power_bit;
val |= pll->enable_bit;
writel(val, pll->base);
return 0;
@@ -98,6 +103,9 @@ static int clk_pllv3_generic_disable(struct clk *clk) val &= ~pll->power_bit; else val |= pll->power_bit;
val &= ~pll->enable_bit;
writel(val, pll->base);
return 0;
@@ -238,6 +246,7 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, return ERR_PTR(-ENOMEM);
pll->power_bit = BM_PLL_POWER;
pll->enable_bit = BM_PLL_ENABLE;
switch (type) { case IMX_PLLV3_GENERIC:
Reviewed-by: Lukasz Majewski lukma@denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de