From: Stephen Carlson stcarlso@linux.microsoft.com
NXP/Freescale Layerscape CPUs support high-speed serial interfaces (SERDES) that can be configured for the application. Interfaces not used by the application can be set to protocol 0 to turn them off and save power, but U-Boot would emit a warning that 0 was invalid for a SERDES protocol on boot. Replace the warning text with a notice that the SERDES is disabled.
Signed-off-by: Stephen Carlson stcarlso@linux.microsoft.com Cc: Priyanka Jain priyanka.jain@nxp.com --- arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c index fad7a93566..181bd9c1b4 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c @@ -147,10 +147,14 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask, cfg >>= sd_prctl_shift;
cfg = serdes_get_number(sd, cfg); - printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg); + if (cfg == 0) { + printf("SERDES%d is disabled\n", sd + 1); + } else { + printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
- if (!is_serdes_prtcl_valid(sd, cfg)) - printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg); + if (!is_serdes_prtcl_valid(sd, cfg)) + printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg); + }
for (lane = 0; lane < SRDS_MAX_LANES; lane++) { enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);