From: Algapally Santosh Sagar santoshsagar.algapally@amd.com
status and ecc_status are of unsigned type where they are compared for negative value. This is pointed by below sparse warning. Change datatype to int to fix this. warning: comparison of unsigned expression in '< 0' is always false [-Wtype-limits]
Signed-off-by: Algapally Santosh Sagar santoshsagar.algapally@amd.com Reviewed-by: Michael Trimarchi michael@amarulasolutions.com Signed-off-by: Ashok Reddy Soma ashok.reddy.soma@amd.com ---
(no changes since v1)
drivers/mtd/nand/raw/zynq_nand.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/raw/zynq_nand.c b/drivers/mtd/nand/raw/zynq_nand.c index 9e3ee7412d..545fdd7b69 100644 --- a/drivers/mtd/nand/raw/zynq_nand.c +++ b/drivers/mtd/nand/raw/zynq_nand.c @@ -285,7 +285,7 @@ static int zynq_nand_init_nand_flash(struct mtd_info *mtd, int option) { struct nand_chip *nand_chip = mtd_to_nand(mtd); struct nand_drv *smc = nand_get_controller_data(nand_chip); - u32 status; + int status;
/* disable interrupts */ writel(ZYNQ_NAND_CLR_CONFIG, &smc->reg->cfr); @@ -332,7 +332,7 @@ static int zynq_nand_calculate_hwecc(struct mtd_info *mtd, const u8 *data, struct nand_drv *smc = nand_get_controller_data(nand_chip); u32 ecc_value = 0; u8 ecc_reg, ecc_byte; - u32 ecc_status; + int ecc_status;
/* Wait till the ECC operation is complete */ ecc_status = zynq_nand_waitfor_ecc_completion(mtd);