On Monday, April 13, 2015 at 07:37:42 AM, maitysanchayan@gmail.com wrote:
Hello,
On 15-04-13 01:29:39, Marek Vasut wrote:
On Wednesday, April 08, 2015 at 03:20:09 PM, Sanchayan Maity wrote:
This driver adds support for the USB peripheral on Freescale Vybrid SoC's.
Signed-off-by: Sanchayan Maity maitysanchayan@gmail.com
arch/arm/include/asm/arch-vf610/crm_regs.h | 10 ++ arch/arm/include/asm/arch-vf610/imx-regs.h | 4 + arch/arm/include/asm/arch-vf610/regs-usbphy.h | 31 ++++ drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-vf.c | 196
++++++++++++++++++++++++++ 5 files changed, 242 insertions(+)
create mode 100644 arch/arm/include/asm/arch-vf610/regs-usbphy.h create mode 100644 drivers/usb/host/ehci-vf.c
A general hint, you can replace sequences of code like this:
var = readl(foo); var |= BIT_BAR; writel(var, addr);
with
setbits_le32(var, BIT_BAR);
Same applies for clearing -- clrbits_le32() and both setting and clearing -- clrsetbits_le32().
Sorry about that. It is something which I use in the sixth patch as well in the board files but it skipped my mind while doing this driver. Will take care of it in v3 which seems imminent.
Noted, thanks :).
Thank you :)
Best regards, Marek Vasut