Hi,
I have a imx6ull module from Toradex, with NAND flash. U-boot does not have SPL. I does not boot from NAND flash anymore, I was able to flash it several times with tezi, as well as with nandbcb (that I discovered more recently).
There are error messages complaining about some bad blocks, including block 0x00000000.
Toradex say that the module cannot be recovered, but this seems in contradiction with what we can read from the iMX6 reference manual, where the boot process description mentions that the ROM can attempt to seek for FCB several times.
I attempted to use nandbcb to write the FCB at next block, ie 0x20000 (attempting a lower value makes nandbcb complain that I am not writing to an aligned location), with no better success.
What is your mind about that ? Sounds that the answer could be in mis-configured fuses, else I consider that having block 0x00000000 causes a bricked board, as a weakness for production, in other words, an unreliable product.
Best regards Thierry
