Signed-off-by: Andreas Bießmann andreas.devel@googlemail.com ---
arch/avr32/Kconfig | 9 -- board/atmel/atstk1000/Kconfig | 48 ---------- board/atmel/atstk1000/MAINTAINERS | 6 -- board/atmel/atstk1000/atstk1000.c | 23 +---- configs/atstk1003_defconfig | 2 - configs/atstk1004_defconfig | 2 - configs/atstk1006_defconfig | 2 - include/configs/atstk1003.h | 161 ---------------------------------- include/configs/atstk1004.h | 161 ---------------------------------- include/configs/atstk1006.h | 178 -------------------------------------- 10 files changed, 1 insertion(+), 591 deletions(-) delete mode 100644 configs/atstk1003_defconfig delete mode 100644 configs/atstk1004_defconfig delete mode 100644 configs/atstk1006_defconfig delete mode 100644 include/configs/atstk1003.h delete mode 100644 include/configs/atstk1004.h delete mode 100644 include/configs/atstk1006.h
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index c5c06ba..2228dc1 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -13,15 +13,6 @@ config TARGET_ATNGW100MKII config TARGET_ATSTK1002 bool "Support atstk1002"
-config TARGET_ATSTK1003 - bool "Support atstk1003" - -config TARGET_ATSTK1004 - bool "Support atstk1004" - -config TARGET_ATSTK1006 - bool "Support atstk1006" - config TARGET_GRASSHOPPER bool "Support grasshopper"
diff --git a/board/atmel/atstk1000/Kconfig b/board/atmel/atstk1000/Kconfig index 6d41514..b4fa9a2 100644 --- a/board/atmel/atstk1000/Kconfig +++ b/board/atmel/atstk1000/Kconfig @@ -13,51 +13,3 @@ config SYS_CONFIG_NAME default "atstk1002"
endif - -if TARGET_ATSTK1003 - -config SYS_BOARD - default "atstk1000" - -config SYS_VENDOR - default "atmel" - -config SYS_SOC - default "at32ap700x" - -config SYS_CONFIG_NAME - default "atstk1003" - -endif - -if TARGET_ATSTK1004 - -config SYS_BOARD - default "atstk1000" - -config SYS_VENDOR - default "atmel" - -config SYS_SOC - default "at32ap700x" - -config SYS_CONFIG_NAME - default "atstk1004" - -endif - -if TARGET_ATSTK1006 - -config SYS_BOARD - default "atstk1000" - -config SYS_VENDOR - default "atmel" - -config SYS_SOC - default "at32ap700x" - -config SYS_CONFIG_NAME - default "atstk1006" - -endif diff --git a/board/atmel/atstk1000/MAINTAINERS b/board/atmel/atstk1000/MAINTAINERS index 378e1b3..6143846 100644 --- a/board/atmel/atstk1000/MAINTAINERS +++ b/board/atmel/atstk1000/MAINTAINERS @@ -4,9 +4,3 @@ S: Orphan (since 2014-06) F: board/atmel/atstk1000/ F: include/configs/atstk1002.h F: configs/atstk1002_defconfig -F: include/configs/atstk1003.h -F: configs/atstk1003_defconfig -F: include/configs/atstk1004.h -F: configs/atstk1004_defconfig -F: include/configs/atstk1006.h -F: configs/atstk1006_defconfig diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c index fd4363b..679b674 100644 --- a/board/atmel/atstk1000/atstk1000.c +++ b/board/atmel/atstk1000/atstk1000.c @@ -30,32 +30,12 @@ struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = { };
static const struct sdram_config sdram_config = { -#if defined(CONFIG_ATSTK1006) - /* Dual MT48LC16M16A2-7E (64 MB) on daughterboard */ .data_bits = SDRAM_DATA_32BIT, - .row_bits = 13, - .col_bits = 9, - .bank_bits = 2, - .cas = 2, - .twr = 2, - .trc = 7, - .trp = 2, - .trcd = 2, - .tras = 4, - .txsr = 7, - /* 7.81 us */ - .refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000, -#else - /* MT48LC2M32B2P-5 (8 MB) on motherboard */ -#ifdef CONFIG_ATSTK1004 - .data_bits = SDRAM_DATA_16BIT, -#else - .data_bits = SDRAM_DATA_32BIT, -#endif #ifdef CONFIG_ATSTK1000_16MB_SDRAM /* MT48LC4M32B2P-6 (16 MB) on mod'ed motherboard */ .row_bits = 12, #else + /* MT48LC2M32B2P-5 (8 MB) on motherboard */ .row_bits = 11, #endif .col_bits = 8, @@ -69,7 +49,6 @@ static const struct sdram_config sdram_config = { .txsr = 5, /* 15.6 us */ .refresh_period = (156 * (SDRAMC_BUS_HZ / 1000)) / 10000, -#endif };
int board_early_init_f(void) diff --git a/configs/atstk1003_defconfig b/configs/atstk1003_defconfig deleted file mode 100644 index b704532..0000000 --- a/configs/atstk1003_defconfig +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_AVR32=y -CONFIG_TARGET_ATSTK1003=y diff --git a/configs/atstk1004_defconfig b/configs/atstk1004_defconfig deleted file mode 100644 index 7650254..0000000 --- a/configs/atstk1004_defconfig +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_AVR32=y -CONFIG_TARGET_ATSTK1004=y diff --git a/configs/atstk1006_defconfig b/configs/atstk1006_defconfig deleted file mode 100644 index 54beb0b..0000000 --- a/configs/atstk1006_defconfig +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_AVR32=y -CONFIG_TARGET_ATSTK1006=y diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h deleted file mode 100644 index 63704b1..0000000 --- a/include/configs/atstk1003.h +++ /dev/null @@ -1,161 +0,0 @@ -/* - * Copyright (C) 2007 Atmel Corporation - * - * Configuration settings for the ATSTK1003 CPU daughterboard - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/hardware.h> - -#define CONFIG_AT32AP -#define CONFIG_AT32AP7001 -#define CONFIG_ATSTK1003 -#define CONFIG_ATSTK1000 - -/* - * Set up the PLL to run at 140 MHz, the CPU to run at the PLL - * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the - * PLL frequency. - * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz - */ -#define CONFIG_PLL -#define CONFIG_SYS_POWER_MANAGER -#define CONFIG_SYS_OSC0_HZ 20000000 -#define CONFIG_SYS_PLL0_DIV 1 -#define CONFIG_SYS_PLL0_MUL 7 -#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16 -/* - * Set the CPU running at: - * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz - */ -#define CONFIG_SYS_CLKDIV_CPU 0 -/* - * Set the HSB running at: - * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz - */ -#define CONFIG_SYS_CLKDIV_HSB 1 -/* - * Set the PBA running at: - * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz - */ -#define CONFIG_SYS_CLKDIV_PBA 2 -/* - * Set the PBB running at: - * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz - */ -#define CONFIG_SYS_CLKDIV_PBB 1 - -/* Reserve VM regions for SDRAM and NOR flash */ -#define CONFIG_SYS_NR_VM_REGIONS 2 - -/* - * The PLLOPT register controls the PLL like this: - * icp = PLLOPT<2> - * ivco = PLLOPT<1:0> - * - * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). - */ -#define CONFIG_SYS_PLL0_OPT 0x04 - -#define CONFIG_USART_BASE ATMEL_BASE_USART1 -#define CONFIG_USART_ID 1 - -/* User serviceable stuff */ -#define CONFIG_DOS_PARTITION - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#define CONFIG_STACKSIZE (2048) - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTARGS \ - "console=ttyS0 root=/dev/mmcblk0p1 rootwait" - -#define CONFIG_BOOTCOMMAND \ - "mmc rescan; ext2load mmc 0:1 0x10400000 /boot/uImage; bootm" - -/* - * Only interrupt autoboot if <space> is pressed. Otherwise, garbage - * data on the serial line may interrupt the boot sequence. - */ -#define CONFIG_BOOTDELAY 1 -#define CONFIG_AUTOBOOT -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n", bootdelay -#define CONFIG_AUTOBOOT_DELAY_STR "d" -#define CONFIG_AUTOBOOT_STOP_STR " " - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MMC - -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_XIMG - -#define CONFIG_ATMEL_USART -#define CONFIG_PORTMUX_PIO -#define CONFIG_SYS_HSDRAMC -#define CONFIG_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#define CONFIG_GENERIC_MMC - -#define CONFIG_SYS_DCACHE_LINESZ 32 -#define CONFIG_SYS_ICACHE_LINESZ 32 - -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER - -#define CONFIG_SYS_FLASH_BASE 0x00000000 -#define CONFIG_SYS_FLASH_SIZE 0x800000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 135 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_TEXT_BASE 0x00000000 - -#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE -#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE -#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE - -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SIZE 65536 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE) - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) - -#define CONFIG_SYS_MALLOC_LEN (256*1024) - -/* Allow 4MB for the kernel run-time image */ -#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) -#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024) - -/* Other configuration settings that shouldn't have to change all that often */ -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP - -#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x700000) -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } - -#endif /* __CONFIG_H */ diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h deleted file mode 100644 index 331a60d..0000000 --- a/include/configs/atstk1004.h +++ /dev/null @@ -1,161 +0,0 @@ -/* - * Copyright (C) 2007 Atmel Corporation - * - * Configuration settings for the ATSTK1003 CPU daughterboard - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/hardware.h> - -#define CONFIG_AT32AP -#define CONFIG_AT32AP7002 -#define CONFIG_ATSTK1004 -#define CONFIG_ATSTK1000 - -/* - * Set up the PLL to run at 140 MHz, the CPU to run at the PLL - * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the - * PLL frequency. - * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz - */ -#define CONFIG_PLL -#define CONFIG_SYS_POWER_MANAGER -#define CONFIG_SYS_OSC0_HZ 20000000 -#define CONFIG_SYS_PLL0_DIV 1 -#define CONFIG_SYS_PLL0_MUL 7 -#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16 -/* - * Set the CPU running at: - * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz - */ -#define CONFIG_SYS_CLKDIV_CPU 0 -/* - * Set the HSB running at: - * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz - */ -#define CONFIG_SYS_CLKDIV_HSB 1 -/* - * Set the PBA running at: - * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz - */ -#define CONFIG_SYS_CLKDIV_PBA 2 -/* - * Set the PBB running at: - * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz - */ -#define CONFIG_SYS_CLKDIV_PBB 1 - -/* Reserve VM regions for SDRAM and NOR flash */ -#define CONFIG_SYS_NR_VM_REGIONS 2 - -/* - * The PLLOPT register controls the PLL like this: - * icp = PLLOPT<2> - * ivco = PLLOPT<1:0> - * - * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). - */ -#define CONFIG_SYS_PLL0_OPT 0x04 - -#define CONFIG_USART_BASE ATMEL_BASE_USART1 -#define CONFIG_USART_ID 1 - -/* User serviceable stuff */ -#define CONFIG_DOS_PARTITION - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#define CONFIG_STACKSIZE (2048) - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTARGS \ - "console=ttyS0 root=/dev/mmcblk0p1 rootwait" - -#define CONFIG_BOOTCOMMAND \ - "mmc rescan; ext2load mmc 0:1 0x10200000 /boot/uImage; bootm" - -/* - * Only interrupt autoboot if <space> is pressed. Otherwise, garbage - * data on the serial line may interrupt the boot sequence. - */ -#define CONFIG_BOOTDELAY 1 -#define CONFIG_AUTOBOOT -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n", bootdelay -#define CONFIG_AUTOBOOT_DELAY_STR "d" -#define CONFIG_AUTOBOOT_STOP_STR " " - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MMC - -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_XIMG - -#define CONFIG_ATMEL_USART -#define CONFIG_PORTMUX_PIO -#define CONFIG_SYS_HSDRAMC -#define CONFIG_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#define CONFIG_GENERIC_MMC - -#define CONFIG_SYS_DCACHE_LINESZ 32 -#define CONFIG_SYS_ICACHE_LINESZ 32 - -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER - -#define CONFIG_SYS_FLASH_BASE 0x00000000 -#define CONFIG_SYS_FLASH_SIZE 0x800000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 135 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_TEXT_BASE 0x00000000 - -#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE -#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE -#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE - -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SIZE 65536 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE) - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) - -#define CONFIG_SYS_MALLOC_LEN (256*1024) - -/* Allow 2MB for the kernel run-time image */ -#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00200000) -#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024) - -/* Other configuration settings that shouldn't have to change all that often */ -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP - -#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x700000) -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } - -#endif /* __CONFIG_H */ diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h deleted file mode 100644 index 25090a6..0000000 --- a/include/configs/atstk1006.h +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Copyright (C) 2005-2006 Atmel Corporation - * - * Configuration settings for the ATSTK1002 CPU daughterboard - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/hardware.h> - -#define CONFIG_AT32AP -#define CONFIG_AT32AP7000 -#define CONFIG_ATSTK1006 -#define CONFIG_ATSTK1000 - - -/* - * Set up the PLL to run at 140 MHz, the CPU to run at the PLL - * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the - * PLL frequency. - * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz - */ -#define CONFIG_PLL -#define CONFIG_SYS_POWER_MANAGER -#define CONFIG_SYS_OSC0_HZ 20000000 -#define CONFIG_SYS_PLL0_DIV 1 -#define CONFIG_SYS_PLL0_MUL 7 -#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16 -/* - * Set the CPU running at: - * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz - */ -#define CONFIG_SYS_CLKDIV_CPU 0 -/* - * Set the HSB running at: - * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz - */ -#define CONFIG_SYS_CLKDIV_HSB 1 -/* - * Set the PBA running at: - * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz - */ -#define CONFIG_SYS_CLKDIV_PBA 2 -/* - * Set the PBB running at: - * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz - */ -#define CONFIG_SYS_CLKDIV_PBB 1 - -/* Reserve VM regions for SDRAM and NOR flash */ -#define CONFIG_SYS_NR_VM_REGIONS 2 - -/* - * The PLLOPT register controls the PLL like this: - * icp = PLLOPT<2> - * ivco = PLLOPT<1:0> - * - * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). - */ -#define CONFIG_SYS_PLL0_OPT 0x04 - -#define CONFIG_USART_BASE ATMEL_BASE_USART1 -#define CONFIG_USART_ID 1 - -/* User serviceable stuff */ -#define CONFIG_DOS_PARTITION - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#define CONFIG_STACKSIZE (2048) - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTARGS \ - "console=ttyS0 root=mtd3 fbmem=2400k" - -#define CONFIG_BOOTCOMMAND \ - "fsload; bootm $(fileaddr)" - -/* - * Only interrupt autoboot if <space> is pressed. Otherwise, garbage - * data on the serial line may interrupt the boot sequence. - */ -#define CONFIG_BOOTDELAY 1 -#define CONFIG_AUTOBOOT -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n", bootdelay -#define CONFIG_AUTOBOOT_DELAY_STR "d" -#define CONFIG_AUTOBOOT_STOP_STR " " - -/* - * After booting the board for the first time, new ethernet addresses - * should be generated and assigned to the environment variables - * "ethaddr" and "eth1addr". This is normally done during production. - */ -#define CONFIG_OVERWRITE_ETHADDR_ONCE - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MMC - -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_SOURCE -#undef CONFIG_CMD_XIMG - -#define CONFIG_ATMEL_USART -#define CONFIG_MACB -#define CONFIG_PORTMUX_PIO -#define CONFIG_SYS_NR_PIOS 5 -#define CONFIG_SYS_HSDRAMC -#define CONFIG_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#define CONFIG_GENERIC_MMC - -#define CONFIG_SYS_DCACHE_LINESZ 32 -#define CONFIG_SYS_ICACHE_LINESZ 32 - -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER - -#define CONFIG_SYS_FLASH_BASE 0x00000000 -#define CONFIG_SYS_FLASH_SIZE 0x800000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 135 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_TEXT_BASE 0x00000000 - -#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE -#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE -#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE - -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SIZE 65536 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE) - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) - -#define CONFIG_SYS_MALLOC_LEN (256*1024) - -/* Allow 4MB for the kernel run-time image */ -#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) -#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024) - -/* Other configuration settings that shouldn't have to change all that often */ -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP - -#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x3f00000) -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } - -#endif /* __CONFIG_H */