This code is small snippet from patch ftp://ftp.linux4sam.org/pub/uboot/u-boot-v2010.06/u-boot-5series_1.0.patch
Linux 2.6.39 (released on www.at91.com/linux4sam) requires serial and revision ATAGs to detect NAND device.
This patch provides backward compatibility for old Linux 2.6.39 by passing serial and revision ATAGs to Linux kernel.
Signed-off-by: Julius Hemanth juliushemanth@gmail.com --- Changes for v3: - corrected GPBR register access - updated commit message
Changes for v2: - access GPBR using c structure - removed tailing 1 for #define - s/Miscelaneous/Miscellaneous - s/initialisations/initializations
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 33 ++++++++++++++++++++++++++++++++- include/configs/at91sam9x5ek.h | 5 +++++ 2 files changed, 37 insertions(+), 1 deletion(-)
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c index 8773e6f..116bd83 100644 --- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c @@ -27,6 +27,7 @@ #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_gpbr.h> #include <asm/arch/gpio.h> #include <asm/arch/clk.h> #include <lcd.h> @@ -48,8 +49,34 @@ DECLARE_GLOBAL_DATA_PTR;
/* ------------------------------------------------------------------------- */ /* - * Miscelaneous platform dependent initialisations + * Miscellaneous platform dependent initializations */ + +#ifdef CONFIG_LOAD_ONE_WIRE_INFO +static u32 system_rev; +static u32 system_serial_low; + +u32 get_board_rev(void) +{ + return system_rev; +} + +void get_board_serial(struct tag_serialnr *serialnr) +{ + serialnr->high = 0; /* Not used */ + serialnr->low = system_serial_low; +} + +void load_1wire_info(void) +{ + at91_gpbr_t *gpbr = (at91_gpbr_t *) ATMEL_BASE_GPBR; + + /* serial is in GPBR #2 and revision is in GPBR #3 */ + system_serial_low = readl(&gpbr->reg[2]); + system_rev = readl(&gpbr->reg[3]); +} +#endif + #ifdef CONFIG_CMD_NAND static void at91sam9x5ek_nand_hw_init(void) { @@ -282,6 +309,10 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+#ifdef CONFIG_LOAD_ONE_WIRE_INFO + load_1wire_info(); +#endif + #ifdef CONFIG_CMD_NAND at91sam9x5ek_nand_hw_init(); #endif diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index ee6e3fc..995e43b 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -38,6 +38,11 @@ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG + +#define CONFIG_LOAD_ONE_WIRE_INFO +#define CONFIG_REVISION_TAG +#define CONFIG_SERIAL_TAG + #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO -- 1.8.2.2