Hello Rayagonda,
With today top of upstream u-boot tree, I am still getting the error in booting lx216ardb
U-Boot 2020.10-rc3-00086-ge5df264e7a (Sep 07 2020 - 14:13:57 +0530) <snip> “Error binding driver 'gic-v3': -96 Some drivers failed to bind initcall sequence 00000000fbdcf368 failed at call 000000008201b5e4 (err=-96) ### ERROR ### Please RESET the board ###
But if apply the changes suggested by you, it is booting fine. Can you please help to send the pull-request for this soon , so that proper fixes are integrated in u-boot code before U-boot v2020.10 release.
Thanks Priyanka
From: Rayagonda Kokatanur rayagonda.kokatanur@broadcom.com Sent: Friday, September 4, 2020 10:50 PM To: Priyanka Jain priyanka.jain@nxp.com Cc: Z.q. Hou zhiqiang.hou@nxp.com; Wasim Khan wasim.khan@nxp.com; Bharat Gooty bharat.gooty@broadcom.com; Manish Tomar manish.tomar@nxp.com; Xiaobo Xie xiaobo.xie@nxp.com; Jiafei Pan jiafei.pan@nxp.com; Meenakshi Aggarwal meenakshi.aggarwal@nxp.com Subject: Re: Change in gic_lpi_tables_init() function
Hi Priyanka,
Please add the following code at the end of "arch/arm/lib/gic-v3-its.c" file, This is not required for the latest uboot hence its not part of the patch.
UCLASS_DRIVER(irq) = { .id = UCLASS_IRQ, .name = "irq", };
Best regards, Rayagonda
On Fri, Sep 4, 2020 at 9:38 PM Priyanka Jain <priyanka.jain@nxp.commailto:priyanka.jain@nxp.com> wrote: Hello Rayagonda,
I am getting below error with top of tree upstream on lx2160ardb. Any pointer here.
U-Boot 2020.10-rc3-00082-g9bfb567e5f (Sep 04 2020 - 21:27:29 +0530)
SoC: LX2160ACE Rev2.0 (0x87360020) Clock Configuration: CPU0(A72):1900 MHz CPU1(A72):1900 MHz CPU2(A72):1900 MHz CPU3(A72):1900 MHz CPU4(A72):1900 MHz CPU5(A72):1900 MHz CPU6(A72):1900 MHz CPU7(A72):1900 MHz CPU8(A72):1900 MHz CPU9(A72):1900 MHz CPU10(A72):1900 MHz CPU11(A72):1900 MHz CPU12(A72):1900 MHz CPU13(A72):1900 MHz CPU14(A72):1900 MHz CPU15(A72):1900 MHz Bus: 600 MHz DDR: 2600 MT/s Reset Configuration Word (RCW): 00000000: 4c6b6b30 204c004c 00000000 00000000 00000010: 00000000 0c010000 00000000 00000000 00000020: 02e001a0 00002580 00000000 00000096 00000030: 00000000 00000000 00000000 00000000 00000040: 00000000 00000000 00000000 00000000 00000050: 00000000 00000000 00000000 00000000 00000060: 00000000 00000000 00027000 00000000 00000070: 08b30010 00150020 Model: NXP Layerscape LX2160ARDB Board Board: LX2160ACE Rev2.0-RDB, Board version: B, boot from FlexSPI DEV#1 FPGA: v5.0 SERDES1 Reference: Clock1 = 161.13MHz Clock2 = 161.13MHz SERDES2 Reference: Clock1 = 100MHz Clock2 = 100MHz SERDES3 Reference: Clock1 = 100MHz Clock2 = 100MHz VID: Core voltage after adjustment is at 851 mV DRAM: 31.9 GiB DDR 31.9 GiB (DDR4, 64-bit, CL=19, ECC on) DDR Controller Interleaving Mode: 256B DDR Chip-Select Interleaving Mode: CS0+CS1 Error binding driver 'gic-v3': -96 Some drivers failed to bind initcall sequence 00000000fbdcf368 failed at call 000000008201b5e4 (err=-96) ### ERROR ### Please RESET the board ###
Regards Priyanka