Re: [U-Boot] [PATCH 1/2 v2] net, fec_mxc: only setup the device enetaddr with eeprom value, if ethaddr is not setup

Dear Heiko Schocher,

In message 4BB238E9.7060609@denx.de you wrote:

if ethaddr is not setup in the environment, fill the device enetaddr with the contents of the eeprom, and only the device enetaddr, not the mac address registers!

Tested on the magnesium board.

Signed-off-by: Heiko Schocher hs@denx.de

• changes since v1 posted here: http://lists.denx.de/pipermail/u-boot/2010-March/069192.html

  • splitted in two patches as Wolfgang suggested

Thanks. Note that it would also have been an excellent idea to put the responsible custodian on Cc:

drivers/net/fec_mxc.c | 9 +++++---- 1 files changed, 5 insertions(+), 4 deletions(-)

Applied, thanks.

Ben, this is (as far as I see it) an undisputed bug fix, so I'm pulling this patch (and only this one from this series of 4) directly. Hope this is ok with you.

Best regards,

Wolfgang Denk