The hab signing script doc/imx/habv4/csf_examples/mx8m/csf.sh does
fdtget -t x u-boot.dtb /binman/imx-boot/uboot offset
to figure out the offset of u-boot.itb inside flash.bin. That works fine for imx8mm, imx8mn, imx8mq, but fails for imx8mp because in that case 'uboot' is merely a label and not actually the node name.
Homogenize these cases and make imx8mp the same as the other imx8m* variants. The binman type is explicitly given and no longer derived from the node name, and the csf.sh script will work for all four SOCs.
Signed-off-by: Rasmus Villemoes rasmus.villemoes@prevas.dk --- arch/arm/dts/imx8mp-u-boot.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi index 200938a980..355af16cf3 100644 --- a/arch/arm/dts/imx8mp-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-u-boot.dtsi @@ -171,14 +171,16 @@ filename = "flash.bin"; pad-byte = <0x00>;
- spl: blob-ext@1 { + spl { filename = "spl.bin"; offset = <0x0>; + type = "blob-ext"; };
- uboot: blob-ext@2 { + binman_uboot: uboot { filename = "u-boot.itb"; offset = <0x58000>; + type = "blob-ext"; }; }; };