Ben,
thanks for your quick reply. Looks like you're right - nothing changed regarding network yet.
Maybe it's a cpu specific problem. Kim ? Can you help here ?
regards, Andre
Ben Warren schrieb:
Hi Andre,
On Wed, Jul 2, 2008 at 7:03 AM, Andre Schwarz andre.schwarz@matrix-vision.de wrote:
Ben,
after pulling u-boot today ethernet stopped working on my MPC8343 based board (mvBL-M7). I'm using a Vitesse VSC8601 RGMII phy on TSEC0-1.
I know there's some rewriting/clean-up going on ...
Yeah, but none of that's in the main source tree.
What do I have to do to get it working again ? Any new defines introduced lately ?
Obviously the MII interface stopped working, i.e. all reads give 0xFF. Switching back to older U-boot (3-4 weeks ago) works fine.
Looking here: http://git.denx.de/?p=u-boot.git;a=history;f=drivers/net/tsec.c;h=6e0f2c6fd0...
nothing new has been added except support for a new PHY, and that was about 5 weeks ago.
Any help is welcome.
Sorry, I don't have access to my MPC8349 board right now or I'd try to help more usefully. Maybe you can post some more information.
regards, Andre
MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
regards, Ben
MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner