Now that the SPL is ready to be compiled in AArch64 and the DRAM init code is ready, enable SPL support for the A64 SoC and in the Pine64 defconfig. For now we keep the boot0 header in the U-Boot proper, as this allows to still use boot0 as an SPL replacement without hurting the SPL use case. We disable FEL support for now, as the code isn't ready yet.
Signed-off-by: Andre Przywara andre.przywara@arm.com --- arch/arm/mach-sunxi/board.c | 2 +- board/sunxi/Kconfig | 2 ++ configs/pine64_plus_defconfig | 1 + include/configs/sunxi-common.h | 2 ++ 4 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 0f8ead9..80d4b57 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -133,7 +133,7 @@ static int gpio_init(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#if defined(CONFIG_SPL_BOARD_LOAD_IMAGE) && defined(CONFIG_SPL_BUILD) static int spl_board_load_image(struct spl_image_info *spl_image, struct spl_boot_device *bootdev) { diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index d477925..b5246df 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -125,6 +125,7 @@ config MACH_SUN50I bool "sun50i (Allwinner A64)" select ARM64 select SUNXI_GEN_SUN6I + select SUPPORT_SPL
endchoice
@@ -187,6 +188,7 @@ config DRAM_ODT_EN bool "sunxi dram odt enable" default n if !MACH_SUN8I_A23 default y if MACH_SUN8I_A23 + default y if MACH_SUN50I ---help--- Select this to enable dram odt (on die termination).
diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig index ebc24b8..2374170 100644 --- a/configs/pine64_plus_defconfig +++ b/configs/pine64_plus_defconfig @@ -5,6 +5,7 @@ CONFIG_MACH_SUN50I=y CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y +CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index e05c318..5279e51 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -183,7 +183,9 @@
#define CONFIG_SPL_FRAMEWORK
+#ifndef CONFIG_MACH_SUN50I #define CONFIG_SPL_BOARD_LOAD_IMAGE +#endif
#if defined(CONFIG_MACH_SUN9I) #define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */