Instead of passing ad-hoc index to USB PHY handling functions and then try and figure out the PHY address, pass in the PHY address itself. For DM case, this address comes easily from DT. For non-DM case, the previous method is still present, however the non-DM case will soon be removed.
Fixes: 4de51cc25b5 ("usb: ehci-mx6: Drop assignment of sequence number") Signed-off-by: Marek Vasut marex@denx.de Cc: Fabio Estevam festevam@gmail.com Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de Cc: Ye Li ye.li@nxp.com Cc: uboot-imx uboot-imx@nxp.com --- drivers/usb/host/ehci-mx6.c | 29 ++++++++++------------------- 1 file changed, 10 insertions(+), 19 deletions(-)
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index b195ba4c89b..800a25d1d9d 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -94,14 +94,8 @@ static const unsigned phy_bases[] = { #endif };
-static void usb_internal_phy_clock_gate(int index, int on) +static void usb_internal_phy_clock_gate(void __iomem *phy_reg, int on) { - void __iomem *phy_reg; - - if (index >= ARRAY_SIZE(phy_bases)) - return; - - phy_reg = (void __iomem *)phy_bases[index]; phy_reg += on ? USBPHY_CTRL_CLR : USBPHY_CTRL_SET; writel(USBPHY_CTRL_CLKGATE, phy_reg); } @@ -166,17 +160,12 @@ static void usb_power_config(int index) }
/* Return 0 : host node, <>0 : device mode */ -static int usb_phy_enable(int index, struct usb_ehci *ehci) +static int usb_phy_enable(struct usb_ehci *ehci, void __iomem *phy_reg) { - void __iomem *phy_reg; void __iomem *phy_ctrl; void __iomem *usb_cmd; int ret;
- if (index >= ARRAY_SIZE(phy_bases)) - return 0; - - phy_reg = (void __iomem *)phy_bases[index]; phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL); usb_cmd = (void __iomem *)&ehci->usbcmd;
@@ -368,8 +357,10 @@ int ehci_hcd_init(int index, enum usb_init_type init, usb_oc_config(index);
#if defined(CONFIG_MX6) || defined(CONFIG_MX7ULP) - usb_internal_phy_clock_gate(index, 1); - usb_phy_enable(index, ehci); + if (index < ARRAY_SIZE(phy_bases)) { + usb_internal_phy_clock_gate((void __iomem *)phy_bases[index], 1); + usb_phy_enable(ehci, (void __iomem *)phy_bases[index]); + } #endif
type = board_usb_phy_mode(index); @@ -427,8 +418,8 @@ static int mx6_init_after_reset(struct ehci_ctrl *dev) usb_oc_config(priv->portnr);
#if defined(CONFIG_MX6) || defined(CONFIG_MX7ULP) - usb_internal_phy_clock_gate(priv->portnr, 1); - usb_phy_enable(priv->portnr, ehci); + usb_internal_phy_clock_gate(priv->phy_addr, 1); + usb_phy_enable(ehci, priv->phy_addr); #endif
#if CONFIG_IS_ENABLED(DM_REGULATOR) @@ -672,8 +663,8 @@ static int ehci_usb_probe(struct udevice *dev) usb_oc_config(priv->portnr);
#if defined(CONFIG_MX6) || defined(CONFIG_MX7ULP) - usb_internal_phy_clock_gate(priv->portnr, 1); - usb_phy_enable(priv->portnr, ehci); + usb_internal_phy_clock_gate(priv->phy_addr, 1); + usb_phy_enable(ehci, priv->phy_addr); #endif
#if CONFIG_IS_ENABLED(DM_REGULATOR)