Signed-off-by: Heiko Schocher hs@denx.de Signed-off-by: Simon Glass sjg@chromium.org Cc: Henrik Nordström henrik@henriknordstrom.net
--- - changes for v2: add comment from Henrik Nordström henrik@henriknordstrom.net remove wrong line in README - rebase against current mainline 178d0cc1a4c73c3341afbeb2a93b172de8c96bd1 - changes for v3: - adapt to the new introduced U_BOOT_I2C_ADAP_COMPLETE define - fix Codingstyle issues - adapt README --- README | 74 ++++++++++++++++++++++++- arch/arm/lib/board.c | 7 ++- arch/blackfin/lib/board.c | 7 +++ arch/m68k/lib/board.c | 17 +++++- arch/mips/lib/board.c | 7 +++ arch/nds32/lib/board.c | 10 +++- arch/powerpc/cpu/mpc8xx/video.c | 4 ++ arch/powerpc/lib/board.c | 12 +++- common/cmd_date.c | 9 +++ common/cmd_dtt.c | 9 +++ common/cmd_i2c.c | 120 ++++++++++++++++++++++++++-------------- common/env_eeprom.c | 14 +++++ common/stdio.c | 13 ++++- include/i2c.h | 9 --- 14 Dateien geändert, 251 Zeilen hinzugefügt(+), 61 Zeilen entfernt(-)
diff --git a/README b/README index 862bb3e..3144d60 100644 --- a/README +++ b/README @@ -1884,9 +1884,77 @@ CBFS (Coreboot Filesystem) support on those systems that support this (optional) feature, like the TQM8xxL modules.
-- I2C Support: CONFIG_HARD_I2C | CONFIG_SOFT_I2C - - These enable I2C serial bus commands. Defining either of +- I2C Support: CONFIG_SYS_I2C + + This enable the NEW i2c subsystem, and will allow you to use + i2c commands at the u-boot command line (as long as you set + CONFIG_CMD_I2C in CONFIG_COMMANDS) and communicate with i2c + based realtime clock chips or other i2c devices. See + common/cmd_i2c.c for a description of the command line + interface. + + ported i2c driver to the new framework: + + additional defines: + + CONFIG_SYS_NUM_I2C_BUSES + Hold the number of i2c busses you want to use. If you + don't use/have i2c muxes on your i2c bus, this + is equal to CONFIG_SYS_NUM_I2C_ADAPTERS, and you can + omit this define. + + CONFIG_SYS_I2C_DIRECT_BUS + define this, if you don't use i2c muxes on your hardware. + if CONFIG_SYS_I2C_MAX_HOPS is not defined or == 0 you can + omit this define. + + CONFIG_SYS_I2C_MAX_HOPS + define how many muxes are maximal consecutively connected + on one i2c bus. If you not use i2c muxes, omit this + define. + + CONFIG_SYS_I2C_BUSES + hold a list of busses you want to use, only used if + CONFIG_SYS_I2C_DIRECT_BUS is not defined, for example + a board with CONFIG_SYS_I2C_MAX_HOPS = 1 and + CONFIG_SYS_NUM_I2C_BUSES = 9: + + CONFIG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP}}, \ + {0, {{I2C_MUX_PCA9547, 0x70, 1}}}, \ + {0, {{I2C_MUX_PCA9547, 0x70, 2}}}, \ + {0, {{I2C_MUX_PCA9547, 0x70, 3}}}, \ + {0, {{I2C_MUX_PCA9547, 0x70, 4}}}, \ + {0, {{I2C_MUX_PCA9547, 0x70, 5}}}, \ + {1, {I2C_NULL_HOP}}, \ + {1, {{I2C_MUX_PCA9544, 0x72, 1}}}, \ + {1, {{I2C_MUX_PCA9544, 0x72, 2}}}, \ + } + + which defines + bus 0 on adapter 0 without a mux + bus 1 on adapter 0 without a PCA9547 on address 0x70 port 1 + bus 2 on adapter 0 without a PCA9547 on address 0x70 port 2 + bus 3 on adapter 0 without a PCA9547 on address 0x70 port 3 + bus 4 on adapter 0 without a PCA9547 on address 0x70 port 4 + bus 5 on adapter 0 without a PCA9547 on address 0x70 port 5 + bus 6 on adapter 1 without a mux + bus 7 on adapter 1 without a PCA9544 on address 0x72 port 1 + bus 8 on adapter 1 without a PCA9544 on address 0x72 port 2 + + If you do not have i2c muxes on your board, omit this define. + +- Legacy I2C Support: CONFIG_HARD_I2C | CONFIG_SOFT_I2C + + NOTE: It is intended to move drivers to CONFIG_SYS_I2C which + provides the following compelling advantages: + + - more than one i2c adapter is usable + - approved multibus support + - better i2c mux support + + ** Please consider updating your I2C driver now. ** + + These enable legacy I2C serial bus commands. Defining either of (but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will include the appropriate I2C driver for the selected CPU.
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 0521178..b473dcb 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -69,7 +69,8 @@ extern void dataflash_print_info(void); #endif
#if defined(CONFIG_HARD_I2C) || \ - defined(CONFIG_SOFT_I2C) + defined(CONFIG_SOFT_I2C) || \ + defined(CONFIG_SYS_I2C) #include <i2c.h> #endif
@@ -169,7 +170,11 @@ static int display_dram_config(void) static int init_func_i2c(void) { puts("I2C: "); +#ifdef CONFIG_SYS_I2C + i2c_init_all(); +#else i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif puts("ready\n"); return (0); } diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index 75b6c46..309b927 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -37,6 +37,10 @@ int post_flag; #endif
+#if defined(CONFIG_SYS_I2C) +#include <i2c.h> +#endif + DECLARE_GLOBAL_DATA_PTR;
__attribute__((always_inline)) @@ -385,6 +389,9 @@ void board_init_r(gd_t * id, ulong dest_addr) mmc_initialize(bd); #endif
+#if defined(CONFIG_SYS_I2C) + i2c_reloc_fixup(); +#endif /* relocate environment function pointers etc. */ env_relocate();
diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index adaccfe..257fd47 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -56,7 +56,7 @@ #include <version.h>
#if defined(CONFIG_HARD_I2C) || \ - defined(CONFIG_SOFT_I2C) + defined(CONFIG_SOFT_I2C) #include <i2c.h> #endif
@@ -142,11 +142,16 @@ static int init_func_ram (void)
/***********************************************************************/
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) || \ + defined(CONFIG_SYS_I2C) static int init_func_i2c (void) { puts ("I2C: "); +#ifdef CONFIG_SYS_I2C + i2c_init_all(); +#else i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif puts ("ready\n"); return (0); } @@ -178,7 +183,8 @@ init_fnc_t *init_sequence[] = { display_options, checkcpu, checkboard, -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) || \ + defined(CONFIG_SYS_I2C) init_func_i2c, #endif #if defined(CONFIG_HARD_SPI) @@ -501,6 +507,11 @@ void board_init_r (gd_t *id, ulong dest_addr) spi_init_r (); #endif
+#if defined(CONFIG_SYS_I2C) + /* Adjust I2C subsystem pointers after relocation */ + i2c_reloc_fixup(); +#endif + /* relocate environment function pointers etc. */ env_relocate ();
diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c index f19f198..fedac71 100644 --- a/arch/mips/lib/board.c +++ b/arch/mips/lib/board.c @@ -36,6 +36,9 @@ #ifdef CONFIG_BITBANGMII #include <miiphy.h> #endif +#if defined(CONFIG_SYS_I2C) +#include <i2c.h> +#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -296,6 +299,10 @@ void board_init_r(gd_t *id, ulong dest_addr) onenand_init(); #endif
+#if defined(CONFIG_SYS_I2C) + i2c_reloc_fixup(); +#endif + /* relocate environment function pointers etc. */ env_relocate();
diff --git a/arch/nds32/lib/board.c b/arch/nds32/lib/board.c index a7d27fc..8845d05 100644 --- a/arch/nds32/lib/board.c +++ b/arch/nds32/lib/board.c @@ -39,6 +39,10 @@
DECLARE_GLOBAL_DATA_PTR;
+#if defined(CONFIG_SYS_I2C) +#include <i2c.h> +#endif + ulong monitor_flash_len;
/* @@ -172,7 +176,7 @@ init_fnc_t *init_sequence[] = { #if defined(CONFIG_DISPLAY_BOARDINFO) checkboard, /* display board info */ #endif -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C) init_func_i2c, #endif dram_init, /* configure available RAM banks */ @@ -346,6 +350,10 @@ void board_init_r(gd_t *id, ulong dest_addr) mmc_initialize(gd->bd); #endif
+#if defined(CONFIG_SYS_I2C_ADAPTERS) + i2c_reloc_fixup(); +#endif + /* initialize environment */ env_relocate();
diff --git a/arch/powerpc/cpu/mpc8xx/video.c b/arch/powerpc/cpu/mpc8xx/video.c index 1bbf4cc..10e3e88 100644 --- a/arch/powerpc/cpu/mpc8xx/video.c +++ b/arch/powerpc/cpu/mpc8xx/video.c @@ -809,7 +809,11 @@ static void video_encoder_init (void)
/* Initialize the I2C */ debug ("[VIDEO ENCODER] Initializing I2C bus...\n"); +#ifdef CONFIG_SYS_I2C + i2c_init_all(); +#else i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif
#ifdef CONFIG_FADS /* Reset ADV7176 chip */ diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index 422b4a3..23151ef 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -99,7 +99,7 @@ extern void sc3_read_eeprom(void); void doc_init(void); #endif #if defined(CONFIG_HARD_I2C) || \ - defined(CONFIG_SOFT_I2C) + defined(CONFIG_SOFT_I2C) #include <i2c.h> #endif #include <spi.h> @@ -214,11 +214,16 @@ static int init_func_ram(void)
/***********************************************************************/
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) || \ + defined(CONFIG_SYS_I2C) static int init_func_i2c(void) { puts("I2C: "); +#ifdef CONFIG_SYS_I2C + i2c_init_all(); +#else i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif puts("ready\n"); return 0; } @@ -310,7 +315,8 @@ static init_fnc_t *init_sequence[] = { misc_init_f, #endif INIT_FUNC_WATCHDOG_RESET -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) || \ + defined(CONFIG_SYS_I2C) init_func_i2c, #endif #if defined(CONFIG_HARD_SPI) diff --git a/common/cmd_date.c b/common/cmd_date.c index 0ac032c..f7ae1da 100644 --- a/common/cmd_date.c +++ b/common/cmd_date.c @@ -50,8 +50,13 @@ static int do_date(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int old_bus;
/* switch to correct I2C bus */ +#ifdef CONFIG_SYS_I2C + old_bus = i2c_get_bus_num(); + i2c_set_bus_num(CONFIG_SYS_RTC_BUS_NUM); +#else old_bus = I2C_GET_BUS(); I2C_SET_BUS(CONFIG_SYS_RTC_BUS_NUM); +#endif
switch (argc) { case 2: /* set date & time */ @@ -97,7 +102,11 @@ static int do_date(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) }
/* switch back to original I2C bus */ +#ifdef CONFIG_SYS_I2C + i2c_set_bus_num(old_bus); +#else I2C_SET_BUS(old_bus); +#endif
return rcode; } diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c index edbd4a8..c3f8982 100644 --- a/common/cmd_dtt.c +++ b/common/cmd_dtt.c @@ -73,8 +73,13 @@ int dtt_i2c(void) /* Force a compilation error, if there are more then 32 sensors */ BUILD_BUG_ON(sizeof(sensors) > 32); /* switch to correct I2C bus */ +#ifdef CONFIG_SYS_I2C + old_bus = i2c_get_bus_num(); + i2c_set_bus_num(CONFIG_SYS_DTT_BUS_NUM); +#else old_bus = I2C_GET_BUS(); I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM); +#endif
_initialize_dtt();
@@ -86,8 +91,12 @@ int dtt_i2c(void) printf("DTT%d: %i C\n", i + 1, dtt_get_temp(sensors[i]));
/* switch back to original I2C bus */ +#ifdef CONFIG_SYS_I2C + i2c_set_bus_num(old_bus); +#else I2C_SET_BUS(old_bus); #endif +#endif
return 0; } diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 4380794..d59f10d 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -1,4 +1,9 @@ /* + * (C) Copyright 2009 + * Sergey Kubushyn, himself, ksi@koi8.net + * + * Changes for unified multibus/multiadapter I2C support. + * * (C) Copyright 2001 * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com. * @@ -85,6 +90,8 @@ #include <asm/byteorder.h> #include <linux/compiler.h>
+DECLARE_GLOBAL_DATA_PTR; + /* Display values from last command. * Memory modify remembered values are different from display memory. */ @@ -103,7 +110,8 @@ static uint i2c_mm_last_alen; * pairs. The following macros take care of this */
#if defined(CONFIG_SYS_I2C_NOPROBES) -#if defined(CONFIG_I2C_MULTI_BUS) +#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MUX) || \ + defined(CONFIG_I2C_MULTI_BUS) static struct { uchar bus; @@ -119,7 +127,7 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES; #define COMPARE_BUS(b,i) ((b) == 0) /* Make compiler happy */ #define COMPARE_ADDR(a,i) (i2c_no_probes[(i)] == (a)) #define NO_PROBE_ADDR(i) i2c_no_probes[(i)] -#endif /* CONFIG_MULTI_BUS */ +#endif /* defined(CONFIG_SYS_I2C) */
#define NUM_ELEMENTS_NOPROBE (sizeof(i2c_no_probes)/sizeof(i2c_no_probes[0])) #endif @@ -127,9 +135,6 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES; #if defined(CONFIG_I2C_MUX) static I2C_MUX_DEVICE *i2c_mux_devices = NULL; static int i2c_mux_busid = CONFIG_SYS_MAX_I2C_BUS; - -DECLARE_GLOBAL_DATA_PTR; - #endif
#define DISP_LINE_LEN 16 @@ -144,7 +149,6 @@ DECLARE_GLOBAL_DATA_PTR; __weak void i2c_init_board(void) { - return; }
/* TODO: Implement architecture-specific get/set functions */ @@ -161,6 +165,11 @@ void i2c_init_board(void) * * Returns I2C bus speed in Hz. */ +#if !defined(CONFIG_SYS_I2C) +/* + * TODO: Implement architecture-specific get/set functions + * Should go away, if we switched completely to new multibus support + */ __weak unsigned int i2c_get_bus_speed(void) { @@ -188,6 +197,7 @@ int i2c_set_bus_speed(unsigned int speed)
return 0; } +#endif
/** * get_alen() - Small parser helper function to get address length @@ -700,7 +710,7 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv int found = 0; #if defined(CONFIG_SYS_I2C_NOPROBES) int k, skip; - uchar bus = GET_BUS_NUM; + unsigned int bus = GET_BUS_NUM; #endif /* NOPROBES */
if (argc == 2) @@ -1373,9 +1383,8 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) } #endif /* CONFIG_I2C_EDID */
-#if defined(CONFIG_I2C_MUX) /** - * do_i2c_add_bus() - Handle the "i2c bus" command-line command + * do_i2c_show_bus() - Handle the "i2c bus" command-line command * @cmdtp: Command data struct pointer * @flag: Command flag * @argc: Command-line argument count @@ -1383,35 +1392,55 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) * * Returns zero always. */ -static int do_i2c_add_bus(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +#if defined(CONFIG_SYS_I2C) +int do_i2c_show_bus(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - int ret=0; + int i; +#ifndef CONFIG_SYS_I2C_DIRECT_BUS + int j; +#endif
if (argc == 1) { /* show all busses */ - I2C_MUX *mux; - I2C_MUX_DEVICE *device = i2c_mux_devices; - - printf ("Busses reached over muxes:\n"); - while (device != NULL) { - printf ("Bus ID: %x\n", device->busid); - printf (" reached over Mux(es):\n"); - mux = device->mux; - while (mux != NULL) { - printf (" %s@%x ch: %x\n", mux->name, mux->chip, mux->channel); - mux = mux->next; + for (i = 0; i < CONFIG_SYS_NUM_I2C_BUSES; i++) { + printf("Bus %d:\t%s", i, I2C_ADAP_NR(i)->name); +#ifndef CONFIG_SYS_I2C_DIRECT_BUS + for (j = 0; j < CONFIG_SYS_I2C_MAX_HOPS; j++) { + if (i2c_bus[i].next_hop[j].chip == 0) + break; + printf("->%s@0x%2x:%d", + i2c_bus[i].next_hop[j].mux.name, + i2c_bus[i].next_hop[j].chip, + i2c_bus[i].next_hop[j].channel); } - device = device->next; +#endif + printf("\n"); } } else { - (void)i2c_mux_ident_muxstring ((uchar *)argv[1]); - ret = 0; + /* show specific bus */ + i = simple_strtoul(argv[1], NULL, 10); + if (i >= CONFIG_SYS_NUM_I2C_BUSES) { + printf("Invalid bus %d\n", i); + return -1; + } + printf("Bus %d:\t%s", i, I2C_ADAP_NR(i)->name); +#ifndef CONFIG_SYS_I2C_DIRECT_BUS + for (j = 0; j < CONFIG_SYS_I2C_MAX_HOPS; j++) { + if (i2c_bus[i].next_hop[j].chip == 0) + break; + printf("->%s@0x%2x:%d", + i2c_bus[i].next_hop[j].mux.name, + i2c_bus[i].next_hop[j].chip, + i2c_bus[i].next_hop[j].channel); + } +#endif + printf("\n"); } - return ret; + + return 0; } -#endif /* CONFIG_I2C_MUX */ +#endif
-#if defined(CONFIG_I2C_MULTI_BUS) /** * do_i2c_bus_num() - Handle the "i2c dev" command-line command * @cmdtp: Command data struct pointer @@ -1422,23 +1451,29 @@ static int do_i2c_add_bus(cmd_tbl_t * cmdtp, int flag, int argc, char * const ar * Returns zero on success, CMD_RET_USAGE in case of misuse and negative * on error. */ -static int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS) +int do_i2c_bus_num(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - int bus_idx, ret=0; + int ret = 0; + unsigned int bus_no;
if (argc == 1) /* querying current setting */ printf("Current bus is %d\n", i2c_get_bus_num()); else { - bus_idx = simple_strtoul(argv[1], NULL, 10); - printf("Setting bus to %d\n", bus_idx); - ret = i2c_set_bus_num(bus_idx); + bus_no = simple_strtoul(argv[1], NULL, 10); + if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES) { + printf("Invalid bus %d\n", bus_no); + return -1; + } + printf("Setting bus to %d\n", bus_no); + ret = i2c_set_bus_num(bus_no); if (ret) printf("Failure changing bus number (%d)\n", ret); } return ret; } -#endif /* CONFIG_I2C_MULTI_BUS */ +#endif /* defined(CONFIG_SYS_I2C) */
/** * do_i2c_bus_speed() - Handle the "i2c speed" command-line command @@ -1508,16 +1543,21 @@ static int do_i2c_nm(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) */ static int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { +#if defined(CONFIG_SYS_I2C) + i2c_init(I2C_ADAP->speed, I2C_ADAP->slaveaddr); +#else i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif return 0; }
static cmd_tbl_t cmd_i2c_sub[] = { -#if defined(CONFIG_I2C_MUX) - U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_add_bus, "", ""), +#if defined(CONFIG_SYS_I2C) + U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_show_bus, "", ""), #endif /* CONFIG_I2C_MUX */ U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""), -#if defined(CONFIG_I2C_MULTI_BUS) +#if defined(CONFIG_SYS_I2C) || \ + defined(CONFIG_I2C_MULTI_BUS) U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""), #endif /* CONFIG_I2C_MULTI_BUS */ #if defined(CONFIG_I2C_EDID) @@ -1576,11 +1616,11 @@ static int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) /***************************************************/ #ifdef CONFIG_SYS_LONGHELP static char i2c_help_text[] = -#if defined(CONFIG_I2C_MUX) - "bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\ni2c " +#if defined(CONFIG_SYS_I2C) + "bus [muxtype:muxaddr:muxchannel] - show I2C bus info\n" #endif /* CONFIG_I2C_MUX */ "crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n" -#if defined(CONFIG_I2C_MULTI_BUS) +#if defined(CONFIG_SYS_I2C) "i2c dev [dev] - show or set current I2C bus\n" #endif /* CONFIG_I2C_MULTI_BUS */ #if defined(CONFIG_I2C_EDID) diff --git a/common/env_eeprom.c b/common/env_eeprom.c index 45c935b..fbd459a 100644 --- a/common/env_eeprom.c +++ b/common/env_eeprom.c @@ -49,6 +49,10 @@ static int eeprom_bus_read(unsigned dev_addr, unsigned offset, #if defined(CONFIG_I2C_ENV_EEPROM_BUS) int old_bus = i2c_get_bus_num();
+#if defined(CONFIG_SYS_I2C) + if (old_bus != CONFIG_I2C_ENV_EEPROM_BUS) + i2c_set_bus_num(CONFIG_I2C_ENV_EEPROM_BUS); +#else if (gd->flags & GD_FLG_RELOC) { if (env_eeprom_bus == -1) { I2C_MUX_DEVICE *dev = NULL; @@ -68,11 +72,16 @@ static int eeprom_bus_read(unsigned dev_addr, unsigned offset, (uchar *)CONFIG_I2C_ENV_EEPROM_BUS); } #endif +#endif
rcode = eeprom_read(dev_addr, offset, buffer, cnt);
#if defined(CONFIG_I2C_ENV_EEPROM_BUS) +#if defined(CONFIG_SYS_I2C) + if (old_bus != CONFIG_I2C_ENV_EEPROM_BUS) +#else if (old_bus != env_eeprom_bus) +#endif i2c_set_bus_num(old_bus); #endif return rcode; @@ -85,8 +94,13 @@ static int eeprom_bus_write(unsigned dev_addr, unsigned offset, #if defined(CONFIG_I2C_ENV_EEPROM_BUS) int old_bus = i2c_get_bus_num();
+#if defined(CONFIG_SYS_I2C) + if (old_bus != CONFIG_I2C_ENV_EEPROM_BUS) + i2c_set_bus_num(CONFIG_I2C_ENV_EEPROM_BUS); +#else rcode = i2c_mux_ident_muxstring_f((uchar *)CONFIG_I2C_ENV_EEPROM_BUS); #endif +#endif rcode = eeprom_write(dev_addr, offset, buffer, cnt); #if defined(CONFIG_I2C_ENV_EEPROM_BUS) i2c_set_bus_num(old_bus); diff --git a/common/stdio.c b/common/stdio.c index 5d5117c..2011880 100644 --- a/common/stdio.c +++ b/common/stdio.c @@ -1,4 +1,8 @@ /* + * Copyright (C) 2009 Sergey Kubushyn ksi@koi8.net + * + * Changes for multibus/multiadapter I2C support. + * * (C) Copyright 2000 * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it * @@ -30,7 +34,8 @@ #ifdef CONFIG_LOGBUFFER #include <logbuff.h> #endif -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) || \ + defined(CONFIG_SYS_I2C_ADAPTERS) #include <i2c.h> #endif
@@ -210,9 +215,15 @@ int stdio_init (void) #ifdef CONFIG_ARM_DCC drv_arm_dcc_init (); #endif +#ifdef CONFIG_SYS_I2C +#ifdef CONFIG_SYS_I2C_ADAPTERS + i2c_init_all(); +#endif +#else #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); #endif +#endif #ifdef CONFIG_LCD drv_lcd_init (); #endif diff --git a/include/i2c.h b/include/i2c.h index 457fd7d..3e09af9 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -220,15 +220,6 @@ int i2c_mux_ident_muxstring_f (uchar *buf);
#ifdef CONFIG_SYS_I2C /* - * Initialization, must be called once on start up, may be called - * repeatedly to change the speed and slave addresses. - */ -void i2c_init(unsigned int speed, int slaveaddr); -#ifdef CONFIG_SYS_I2C_INIT_BOARD -void i2c_init_board(void); -#endif - -/* * i2c_get_bus_num: * * Returns index of currently active I2C bus. Zero-based.