It is easier to paste these into the command line if they are a single common. Use line continuation instead of separate lines.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v5: - Add new patch to put README image creation commands on one line
Changes in v4: None Changes in v3: None Changes in v2: None
doc/README.rockchip | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/doc/README.rockchip b/doc/README.rockchip index feb11ff..87ce9d2 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -67,7 +67,8 @@ Connect your board's OTG port to your computer.
To create a suitable image and write it to the board:
- ./firefly-rk3288/tools/mkimage -T rkimage -d ./firefly-rk3288/spl/u-boot-spl-dtb.bin out + ./firefly-rk3288/tools/mkimage -T rkimage -d \ + ./firefly-rk3288/spl/u-boot-spl-dtb.bin out && \ cat out | openssl rc4 -K 7c4e0304550509072d2c7b38170d1711 | rkflashtool l
If all goes well you should something like: @@ -89,8 +90,9 @@ Booting from an SD card
To write an image that boots from an SD card (assumed to be /dev/sdc):
- ./firefly-rk3288/tools/mkimage -T rksd -d firefly-rk3288/spl/u-boot-spl-dtb.bin out - sudo dd if=out of=/dev/sdc seek=64 + ./firefly-rk3288/tools/mkimage -T rksd -d \ + firefly-rk3288/spl/u-boot-spl-dtb.bin out && \ + sudo dd if=out of=/dev/sdc seek=64 && \ sudo dd if=firefly-rk3288/u-boot-dtb.img of=/dev/sdc seek=256
This puts the Rockchip header and SPL image first and then places the U-Boot