This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it.
Cc: Otavio Salvador otavio@ossystems.com.br Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/mach-imx/mx6/Kconfig | 10 - board/congatec/cgtqmx6eval/Kconfig | 12 - board/congatec/cgtqmx6eval/MAINTAINERS | 6 - board/congatec/cgtqmx6eval/Makefile | 8 - board/congatec/cgtqmx6eval/README | 74 -- board/congatec/cgtqmx6eval/cgtqmx6eval.c | 1097 ---------------------- configs/cgtqmx6eval_defconfig | 99 -- include/configs/cgtqmx6eval.h | 197 ---- 8 files changed, 1503 deletions(-) delete mode 100644 board/congatec/cgtqmx6eval/Kconfig delete mode 100644 board/congatec/cgtqmx6eval/MAINTAINERS delete mode 100644 board/congatec/cgtqmx6eval/Makefile delete mode 100644 board/congatec/cgtqmx6eval/README delete mode 100644 board/congatec/cgtqmx6eval/cgtqmx6eval.c delete mode 100644 configs/cgtqmx6eval_defconfig delete mode 100644 include/configs/cgtqmx6eval.h
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index de1588735f69..594923e804c2 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -144,15 +144,6 @@ config TARGET_ARISTAINETOS2CCSLB imply CMD_SATA imply CMD_DM
-config TARGET_CGTQMX6EVAL - bool "cgtqmx6eval" - depends on MX6QDL - select BOARD_LATE_INIT - select DM - select DM_THERMAL - select SUPPORT_SPL - imply CMD_DM - config TARGET_CM_FX6 bool "CM-FX6" depends on MX6QDL @@ -628,7 +619,6 @@ source "board/armadeus/opos6uldev/Kconfig" source "board/boundary/nitrogen6x/Kconfig" source "board/bticino/mamoj/Kconfig" source "board/compulab/cm_fx6/Kconfig" -source "board/congatec/cgtqmx6eval/Kconfig" source "board/dhelectronics/dh_imx6/Kconfig" source "board/engicam/imx6q/Kconfig" source "board/engicam/imx6ul/Kconfig" diff --git a/board/congatec/cgtqmx6eval/Kconfig b/board/congatec/cgtqmx6eval/Kconfig deleted file mode 100644 index 773551baa952..000000000000 --- a/board/congatec/cgtqmx6eval/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_CGTQMX6EVAL - -config SYS_BOARD - default "cgtqmx6eval" - -config SYS_VENDOR - default "congatec" - -config SYS_CONFIG_NAME - default "cgtqmx6eval" - -endif diff --git a/board/congatec/cgtqmx6eval/MAINTAINERS b/board/congatec/cgtqmx6eval/MAINTAINERS deleted file mode 100644 index 48c08891b344..000000000000 --- a/board/congatec/cgtqmx6eval/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -CGTQMX6EVAL BOARD -M: Otavio Salvador otavio@ossystems.com.br -S: Maintained -F: board/congatec/cgtqmx6eval/ -F: include/configs/cgtqmx6eval.h -F: configs/cgtqmx6eval_defconfig diff --git a/board/congatec/cgtqmx6eval/Makefile b/board/congatec/cgtqmx6eval/Makefile deleted file mode 100644 index 2c45ca0e12ec..000000000000 --- a/board/congatec/cgtqmx6eval/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2007, Guennadi Liakhovetski lg@denx.de -# -# (C) Copyright 2011 Freescale Semiconductor, Inc. -# (C) Copyright 2013 Adeneo Embedded <www.adeneo-embedded.com> - -obj-y := cgtqmx6eval.o diff --git a/board/congatec/cgtqmx6eval/README b/board/congatec/cgtqmx6eval/README deleted file mode 100644 index 0777c781c26f..000000000000 --- a/board/congatec/cgtqmx6eval/README +++ /dev/null @@ -1,74 +0,0 @@ -U-Boot for the Congatec QMX6 boards - -This file contains information for the port of U-Boot to the Congatec -QMX6 boards. - -1. Building U-Boot ------------------- - -- Build U-Boot for Congatec QMX6 boards: - -$ make mrproper -$ make cgtqmx6eval_defconfig -$ make - -This will generate the following binaries: - -- SPL -- u-boot.img - -2. Flashing U-Boot in the SPI NOR ---------------------------------- - -Copy SPL and u-boot.img to the exported TFTP directory of the -host PC (/tftpboot , for example). - -=> sf probe - -=> setenv serverip <server_ip_address> - -=> setenv ipaddr <board_ip_address> - -=> tftp 0x12000000 SPL - -=> sf erase 0x0 0x10000 - -=> sf write 0x12000000 0x400 0x10000 - -=> tftp 0x12000000 u-boot.img - -=> sf erase 0x10000 0x70000 - -=> sf write 0x12000000 0x10000 0x70000 - -Reboot the board and the new U-Boot should come up. - -3. Booting from the SD card ---------------------------- - -- Flash the SPL image into the SD card: - -sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync - -- Flash the u-boot.img image into the SD card: - -sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync - -- Insert the SD card into the big slot. - -The boot medium of Congatec QMX6 boards is the SPI NOR flash, so boot -the board from SPI first. - -It is also possible to boot from the SD card slot by using the 'bmode' -command: - -=> bmode esdhc4 - -And then the U-Boot from the big slot will boot. - -Note: If the "bmode" command is not available from your pre-installed U-Boot, -these instruction will produce the same effect: - -=> mw.l 0x20d8040 0x3850 -=> mw.l 0x020d8044 0x10000000 -=> reset diff --git a/board/congatec/cgtqmx6eval/cgtqmx6eval.c b/board/congatec/cgtqmx6eval/cgtqmx6eval.c deleted file mode 100644 index 6ae4a1af8921..000000000000 --- a/board/congatec/cgtqmx6eval/cgtqmx6eval.c +++ /dev/null @@ -1,1097 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. - * Based on mx6qsabrelite.c file - * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> - * Leo Sartre, lsartre@adeneo-embedded.com - */ - -#include <common.h> -#include <init.h> -#include <net.h> -#include <asm/global_data.h> -#include <asm/io.h> -#include <asm/arch/clock.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/iomux.h> -#include <asm/arch/mx6-pins.h> -#include <asm/gpio.h> -#include <asm/mach-imx/iomux-v3.h> -#include <asm/mach-imx/sata.h> -#include <asm/mach-imx/boot_mode.h> -#include <asm/mach-imx/mxc_i2c.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/mxc_hdmi.h> -#include <asm/arch/crm_regs.h> -#include <env.h> -#include <mmc.h> -#include <fsl_esdhc_imx.h> -#include <i2c.h> -#include <input.h> -#include <linux/delay.h> -#include <power/pmic.h> -#include <power/pfuze100_pmic.h> -#include <linux/fb.h> -#include <ipu_pixfmt.h> -#include <malloc.h> -#include <miiphy.h> -#include <netdev.h> -#include <micrel.h> -#include <spi_flash.h> -#include <spi.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |\ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW |\ - PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_ODE | PAD_CTL_SRE_FAST) - -#define SPI_PAD_CTRL (PAD_CTL_HYS | \ - PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) - -#define MX6Q_QMX6_PFUZE_MUX IMX_GPIO_NR(6, 9) - - -#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS) - -int dram_init(void) -{ - gd->ram_size = imx_ddr_size(); - - return 0; -} - -static iomux_v3_cfg_t const uart2_pads[] = { - IOMUX_PADS(PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), - IOMUX_PADS(PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), -}; - -#ifndef CONFIG_SPL_BUILD -static iomux_v3_cfg_t const usdhc2_pads[] = { - IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), -}; - -static iomux_v3_cfg_t const usdhc3_pads[] = { - IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL)), -}; -#endif - -static iomux_v3_cfg_t const usdhc4_pads[] = { - IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_NANDF_D6__GPIO2_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)), -}; - -static iomux_v3_cfg_t const usb_otg_pads[] = { - IOMUX_PADS(PAD_EIM_D22__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)), - IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL)), -}; - -static iomux_v3_cfg_t enet_pads_ksz9031[] = { - IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RXC__GPIO6_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD0__GPIO6_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD1__GPIO6_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD2__GPIO6_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD3__GPIO6_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RX_CTL__GPIO6_IO24 | MUX_PAD_CTRL(NO_PAD_CTRL)), -}; - -static iomux_v3_cfg_t enet_pads_final_ksz9031[] = { - IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)), -}; - -static iomux_v3_cfg_t enet_pads_ar8035[] = { - IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)), -}; - -static iomux_v3_cfg_t const ecspi1_pads[] = { - IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)), - IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)), - IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)), - IOMUX_PADS(PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)), -}; - -#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) -struct i2c_pads_info mx6q_i2c_pad_info1 = { - .scl = { - .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC, - .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC, - .gp = IMX_GPIO_NR(4, 12) - }, - .sda = { - .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC, - .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC, - .gp = IMX_GPIO_NR(4, 13) - } -}; - -struct i2c_pads_info mx6dl_i2c_pad_info1 = { - .scl = { - .i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL | PC, - .gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | PC, - .gp = IMX_GPIO_NR(4, 12) - }, - .sda = { - .i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | PC, - .gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | PC, - .gp = IMX_GPIO_NR(4, 13) - } -}; - -#define I2C_PMIC 1 /* I2C2 port is used to connect to the PMIC */ - -struct interface_level { - char *name; - uchar value; -}; - -static struct interface_level mipi_levels[] = { - {"0V0", 0x00}, - {"2V5", 0x17}, -}; - -/* setup board specific PMIC */ -int power_init_board(void) -{ - struct pmic *p; - u32 id1, id2, i; - int ret; - char const *lv_mipi; - - /* configure I2C multiplexer */ - gpio_direction_output(MX6Q_QMX6_PFUZE_MUX, 1); - - power_pfuze100_init(I2C_PMIC); - p = pmic_get("PFUZE100"); - if (!p) - return -EINVAL; - - ret = pmic_probe(p); - if (ret) - return ret; - - pmic_reg_read(p, PFUZE100_DEVICEID, &id1); - pmic_reg_read(p, PFUZE100_REVID, &id2); - printf("PFUZE100 Rev. [%02x/%02x] detected\n", id1, id2); - - if (id2 >= 0x20) - return 0; - - /* set level of MIPI if specified */ - lv_mipi = env_get("lv_mipi"); - if (lv_mipi) - return 0; - - for (i = 0; i < ARRAY_SIZE(mipi_levels); i++) { - if (!strcmp(mipi_levels[i].name, lv_mipi)) { - printf("set MIPI level %s\n", mipi_levels[i].name); - ret = pmic_reg_write(p, PFUZE100_VGEN4VOL, - mipi_levels[i].value); - if (ret) - return ret; - } - } - - return 0; -} - -int board_eth_init(struct bd_info *bis) -{ - struct phy_device *phydev; - struct mii_dev *bus; - unsigned short id1, id2; - int ret; - - /* check whether KSZ9031 or AR8035 has to be configured */ - SETUP_IOMUX_PADS(enet_pads_ar8035); - - /* phy reset */ - gpio_direction_output(IMX_GPIO_NR(3, 23), 0); - udelay(2000); - gpio_set_value(IMX_GPIO_NR(3, 23), 1); - udelay(500); - - bus = fec_get_miibus(IMX_FEC_BASE, -1); - if (!bus) - return -EINVAL; - phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII); - if (!phydev) { - printf("Error: phy device not found.\n"); - ret = -ENODEV; - goto free_bus; - } - - /* get the PHY id */ - id1 = phy_read(phydev, MDIO_DEVAD_NONE, 2); - id2 = phy_read(phydev, MDIO_DEVAD_NONE, 3); - - if ((id1 == 0x22) && ((id2 & 0xFFF0) == 0x1620)) { - /* re-configure for Micrel KSZ9031 */ - printf("configure Micrel KSZ9031 Ethernet Phy at address %d\n", - phydev->addr); - - /* phy reset: gpio3-23 */ - gpio_set_value(IMX_GPIO_NR(3, 23), 0); - gpio_set_value(IMX_GPIO_NR(6, 30), (phydev->addr >> 2)); - gpio_set_value(IMX_GPIO_NR(6, 25), 1); - gpio_set_value(IMX_GPIO_NR(6, 27), 1); - gpio_set_value(IMX_GPIO_NR(6, 28), 1); - gpio_set_value(IMX_GPIO_NR(6, 29), 1); - SETUP_IOMUX_PADS(enet_pads_ksz9031); - gpio_set_value(IMX_GPIO_NR(6, 24), 1); - udelay(500); - gpio_set_value(IMX_GPIO_NR(3, 23), 1); - SETUP_IOMUX_PADS(enet_pads_final_ksz9031); - } else if ((id1 == 0x004d) && (id2 == 0xd072)) { - /* configure Atheros AR8035 - actually nothing to do */ - printf("configure Atheros AR8035 Ethernet Phy at address %d\n", - phydev->addr); - } else { - printf("Unknown Ethernet-Phy: 0x%04x 0x%04x\n", id1, id2); - ret = -EINVAL; - goto free_phydev; - } - - ret = fec_probe(bis, -1, IMX_FEC_BASE, bus, phydev); - if (ret) - goto free_phydev; - - return 0; - -free_phydev: - free(phydev); -free_bus: - free(bus); - return ret; -} - -int mx6_rgmii_rework(struct phy_device *phydev) -{ - unsigned short id1, id2; - unsigned short val; - - /* check whether KSZ9031 or AR8035 has to be configured */ - id1 = phy_read(phydev, MDIO_DEVAD_NONE, 2); - id2 = phy_read(phydev, MDIO_DEVAD_NONE, 3); - - if ((id1 == 0x22) && ((id2 & 0xFFF0) == 0x1620)) { - /* finalize phy configuration for Micrel KSZ9031 */ - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, 2); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 4); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, MII_KSZ9031_MOD_DATA_POST_INC_W | 0x2); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 0x0000); - - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, 2); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 5); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, MII_KSZ9031_MOD_DATA_POST_INC_W | 0x2); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, MII_KSZ9031_MOD_REG); - - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, 2); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 6); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, MII_KSZ9031_MOD_DATA_POST_INC_W | 0x2); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 0xFFFF); - - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, 2); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 8); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, MII_KSZ9031_MOD_DATA_POST_INC_W | 0x2); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 0x3FFF); - - /* fix KSZ9031 link up issue */ - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, 0x0); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 0x4); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, MII_KSZ9031_MOD_DATA_NO_POST_INC); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 0x6); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, MII_KSZ9031_MOD_REG); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 0x3); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, MII_KSZ9031_MOD_DATA_NO_POST_INC); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 0x1A80); - } - - if ((id1 == 0x004d) && (id2 == 0xd072)) { - /* enable AR8035 ouput a 125MHz clk from CLK_25M */ - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, 0x7); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, MII_KSZ9031_MOD_DATA_POST_INC_RW | 0x16); - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, MII_KSZ9031_MOD_DATA_NO_POST_INC | 0x7); - val = phy_read(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA); - val &= 0xfe63; - val |= 0x18; - phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, val); - - /* introduce tx clock delay */ - phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5); - val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e); - val |= 0x0100; - phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val); - - /* disable hibernation */ - phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0xb); - val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e); - phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x3c40); - } - return 0; -} - -int board_phy_config(struct phy_device *phydev) -{ - mx6_rgmii_rework(phydev); - - if (phydev->drv->config) - phydev->drv->config(phydev); - - return 0; -} - -static void setup_iomux_uart(void) -{ - SETUP_IOMUX_PADS(uart2_pads); -} - -#ifdef CONFIG_MXC_SPI -static void setup_spi(void) -{ - SETUP_IOMUX_PADS(ecspi1_pads); - gpio_direction_output(IMX_GPIO_NR(3, 19), 0); -} -#endif - -#ifdef CONFIG_FSL_ESDHC_IMX -static struct fsl_esdhc_cfg usdhc_cfg[] = { - {USDHC2_BASE_ADDR}, - {USDHC3_BASE_ADDR}, - {USDHC4_BASE_ADDR}, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = 0; - - switch (cfg->esdhc_base) { - case USDHC2_BASE_ADDR: - gpio_direction_input(IMX_GPIO_NR(1, 4)); - ret = !gpio_get_value(IMX_GPIO_NR(1, 4)); - break; - case USDHC3_BASE_ADDR: - ret = 1; /* eMMC is always present */ - break; - case USDHC4_BASE_ADDR: - gpio_direction_input(IMX_GPIO_NR(2, 6)); - ret = !gpio_get_value(IMX_GPIO_NR(2, 6)); - break; - default: - printf("Bad USDHC interface\n"); - } - - return ret; -} - -int board_mmc_init(struct bd_info *bis) -{ -#ifndef CONFIG_SPL_BUILD - s32 status = 0; - int i; - - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - - SETUP_IOMUX_PADS(usdhc2_pads); - SETUP_IOMUX_PADS(usdhc3_pads); - SETUP_IOMUX_PADS(usdhc4_pads); - - for (i = 0; i < ARRAY_SIZE(usdhc_cfg); i++) { - status = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); - if (status) - return status; - } - - return 0; -#else - SETUP_IOMUX_PADS(usdhc4_pads); - usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR; - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk; - - return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); -#endif -} -#endif - -int board_ehci_hcd_init(int port) -{ - switch (port) { - case 0: - SETUP_IOMUX_PADS(usb_otg_pads); - /* - * set daisy chain for otg_pin_id on 6q. - * for 6dl, this bit is reserved - */ - imx_iomux_set_gpr_register(1, 13, 1, 1); - break; - case 1: - /* nothing to do */ - break; - default: - printf("Invalid USB port: %d\n", port); - return -EINVAL; - } - - return 0; -} - -int board_ehci_power(int port, int on) -{ - switch (port) { - case 0: - break; - case 1: - gpio_direction_output(IMX_GPIO_NR(5, 5), on); - break; - default: - printf("Invalid USB port: %d\n", port); - return -EINVAL; - } - - return 0; -} - -struct display_info_t { - int bus; - int addr; - int pixfmt; - int (*detect)(struct display_info_t const *dev); - void (*enable)(struct display_info_t const *dev); - struct fb_videomode mode; -}; - -static void disable_lvds(struct display_info_t const *dev) -{ - struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; - - clrbits_le32(&iomux->gpr[2], IOMUXC_GPR2_LVDS_CH0_MODE_MASK | - IOMUXC_GPR2_LVDS_CH1_MODE_MASK); -} - -static void do_enable_hdmi(struct display_info_t const *dev) -{ - disable_lvds(dev); - imx_enable_hdmi_phy(); -} - -static struct display_info_t const displays[] = { -{ - .bus = -1, - .addr = 0, - .pixfmt = IPU_PIX_FMT_RGB666, - .detect = NULL, - .enable = NULL, - .mode = { - .name = - "Hannstar-XGA", - .refresh = 60, - .xres = 1024, - .yres = 768, - .pixclock = 15385, - .left_margin = 220, - .right_margin = 40, - .upper_margin = 21, - .lower_margin = 7, - .hsync_len = 60, - .vsync_len = 10, - .sync = FB_SYNC_EXT, - .vmode = FB_VMODE_NONINTERLACED } }, -{ - .bus = -1, - .addr = 0, - .pixfmt = IPU_PIX_FMT_RGB24, - .detect = NULL, - .enable = do_enable_hdmi, - .mode = { - .name = "HDMI", - .refresh = 60, - .xres = 1024, - .yres = 768, - .pixclock = 15385, - .left_margin = 220, - .right_margin = 40, - .upper_margin = 21, - .lower_margin = 7, - .hsync_len = 60, - .vsync_len = 10, - .sync = FB_SYNC_EXT, - .vmode = FB_VMODE_NONINTERLACED } } -}; - -int board_video_skip(void) -{ - int i; - int ret; - char const *panel = env_get("panel"); - if (!panel) { - for (i = 0; i < ARRAY_SIZE(displays); i++) { - struct display_info_t const *dev = displays + i; - if (dev->detect && dev->detect(dev)) { - panel = dev->mode.name; - printf("auto-detected panel %s\n", panel); - break; - } - } - if (!panel) { - panel = displays[0].mode.name; - printf("No panel detected: default to %s\n", panel); - i = 0; - } - } else { - for (i = 0; i < ARRAY_SIZE(displays); i++) { - if (!strcmp(panel, displays[i].mode.name)) - break; - } - } - if (i < ARRAY_SIZE(displays)) { - ret = ipuv3_fb_init(&displays[i].mode, 0, displays[i].pixfmt); - if (!ret) { - if (displays[i].enable) - displays[i].enable(displays + i); - printf("Display: %s (%ux%u)\n", - displays[i].mode.name, displays[i].mode.xres, - displays[i].mode.yres); - } else - printf("LCD %s cannot be configured: %d\n", - displays[i].mode.name, ret); - } else { - printf("unsupported panel %s\n", panel); - return -EINVAL; - } - - return 0; -} - -int ipu_displays_init(void) -{ - return board_video_skip(); -} - -static void setup_display(void) -{ - struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; - struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; - int reg; - - enable_ipu_clock(); - imx_setup_hdmi(); - - /* Turn on LDB0, LDB1, IPU,IPU DI0 clocks */ - setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK | - MXC_CCM_CCGR3_LDB_DI1_MASK); - - /* set LDB0, LDB1 clk select to 011/011 */ - reg = readl(&mxc_ccm->cs2cdr); - reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK | - MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK); - reg |= (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) | - (3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET); - writel(reg, &mxc_ccm->cs2cdr); - - setbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV | - MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV); - - setbits_le32(&mxc_ccm->chsccdr, CHSCCDR_CLK_SEL_LDB_DI0 << - MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET | - CHSCCDR_CLK_SEL_LDB_DI0 << - MXC_CCM_CHSCCDR_IPU1_DI1_CLK_SEL_OFFSET); - - reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES - | IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_LOW - | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW - | IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG - | IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT - | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG - | IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT - | IOMUXC_GPR2_LVDS_CH0_MODE_DISABLED - | IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0; - writel(reg, &iomux->gpr[2]); - - reg = readl(&iomux->gpr[3]); - reg = (reg & ~(IOMUXC_GPR3_LVDS1_MUX_CTL_MASK | - IOMUXC_GPR3_HDMI_MUX_CTL_MASK)) | - (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 << - IOMUXC_GPR3_LVDS1_MUX_CTL_OFFSET); - writel(reg, &iomux->gpr[3]); -} - -/* - * Do not overwrite the console - * Use always serial for U-Boot console - */ -int overwrite_console(void) -{ - return 1; -} - -int board_early_init_f(void) -{ - setup_iomux_uart(); -#ifdef CONFIG_MXC_SPI - setup_spi(); -#endif - return 0; -} - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - - if (is_mx6dq()) - setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info1); - else - setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1); - - setup_display(); - -#ifdef CONFIG_SATA - setup_sata(); -#endif - - return 0; -} - -int checkboard(void) -{ - char *type = "unknown"; - - if (is_cpu_type(MXC_CPU_MX6Q)) - type = "Quad"; - else if (is_cpu_type(MXC_CPU_MX6D)) - type = "Dual"; - else if (is_cpu_type(MXC_CPU_MX6DL)) - type = "Dual-Lite"; - else if (is_cpu_type(MXC_CPU_MX6SOLO)) - type = "Solo"; - - printf("Board: conga-QMX6 %s\n", type); - - return 0; -} - -#ifdef CONFIG_MXC_SPI -int board_spi_cs_gpio(unsigned bus, unsigned cs) -{ - return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(3, 19)) : -EINVAL; -} -#endif - -#ifdef CONFIG_CMD_BMODE -static const struct boot_mode board_boot_modes[] = { - /* 4 bit bus width */ - {"mmc0", MAKE_CFGVAL(0x50, 0x20, 0x00, 0x00)}, - {"mmc1", MAKE_CFGVAL(0x50, 0x38, 0x00, 0x00)}, - {NULL, 0}, -}; -#endif - -int misc_init_r(void) -{ -#ifdef CONFIG_CMD_BMODE - add_board_boot_modes(board_boot_modes); -#endif - return 0; -} - -int board_late_init(void) -{ -#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - if (is_mx6dq()) - env_set("board_rev", "MX6Q"); - else - env_set("board_rev", "MX6DL"); -#endif - - return 0; -} - -#ifdef CONFIG_SPL_BUILD -#include <asm/arch/mx6-ddr.h> -#include <spl.h> -#include <linux/libfdt.h> -#include <spi_flash.h> -#include <spi.h> - -const struct mx6dq_iomux_ddr_regs mx6q_ddr_ioregs = { - .dram_sdclk_0 = 0x00000030, - .dram_sdclk_1 = 0x00000030, - .dram_cas = 0x00000030, - .dram_ras = 0x00000030, - .dram_reset = 0x00000030, - .dram_sdcke0 = 0x00003000, - .dram_sdcke1 = 0x00003000, - .dram_sdba2 = 0x00000000, - .dram_sdodt0 = 0x00000030, - .dram_sdodt1 = 0x00000030, - .dram_sdqs0 = 0x00000030, - .dram_sdqs1 = 0x00000030, - .dram_sdqs2 = 0x00000030, - .dram_sdqs3 = 0x00000030, - .dram_sdqs4 = 0x00000030, - .dram_sdqs5 = 0x00000030, - .dram_sdqs6 = 0x00000030, - .dram_sdqs7 = 0x00000030, - .dram_dqm0 = 0x00000030, - .dram_dqm1 = 0x00000030, - .dram_dqm2 = 0x00000030, - .dram_dqm3 = 0x00000030, - .dram_dqm4 = 0x00000030, - .dram_dqm5 = 0x00000030, - .dram_dqm6 = 0x00000030, - .dram_dqm7 = 0x00000030, -}; - -static const struct mx6sdl_iomux_ddr_regs mx6dl_ddr_ioregs = { - .dram_sdclk_0 = 0x00000030, - .dram_sdclk_1 = 0x00000030, - .dram_cas = 0x00000030, - .dram_ras = 0x00000030, - .dram_reset = 0x00000030, - .dram_sdcke0 = 0x00003000, - .dram_sdcke1 = 0x00003000, - .dram_sdba2 = 0x00000000, - .dram_sdodt0 = 0x00000030, - .dram_sdodt1 = 0x00000030, - .dram_sdqs0 = 0x00000030, - .dram_sdqs1 = 0x00000030, - .dram_sdqs2 = 0x00000030, - .dram_sdqs3 = 0x00000030, - .dram_sdqs4 = 0x00000030, - .dram_sdqs5 = 0x00000030, - .dram_sdqs6 = 0x00000030, - .dram_sdqs7 = 0x00000030, - .dram_dqm0 = 0x00000030, - .dram_dqm1 = 0x00000030, - .dram_dqm2 = 0x00000030, - .dram_dqm3 = 0x00000030, - .dram_dqm4 = 0x00000030, - .dram_dqm5 = 0x00000030, - .dram_dqm6 = 0x00000030, - .dram_dqm7 = 0x00000030, -}; - -const struct mx6dq_iomux_grp_regs mx6q_grp_ioregs = { - .grp_ddr_type = 0x000C0000, - .grp_ddrmode_ctl = 0x00020000, - .grp_ddrpke = 0x00000000, - .grp_addds = 0x00000030, - .grp_ctlds = 0x00000030, - .grp_ddrmode = 0x00020000, - .grp_b0ds = 0x00000030, - .grp_b1ds = 0x00000030, - .grp_b2ds = 0x00000030, - .grp_b3ds = 0x00000030, - .grp_b4ds = 0x00000030, - .grp_b5ds = 0x00000030, - .grp_b6ds = 0x00000030, - .grp_b7ds = 0x00000030, -}; - -static const struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = { - .grp_ddr_type = 0x000c0000, - .grp_ddrmode_ctl = 0x00020000, - .grp_ddrpke = 0x00000000, - .grp_addds = 0x00000030, - .grp_ctlds = 0x00000030, - .grp_ddrmode = 0x00020000, - .grp_b0ds = 0x00000030, - .grp_b1ds = 0x00000030, - .grp_b2ds = 0x00000030, - .grp_b3ds = 0x00000030, - .grp_b4ds = 0x00000030, - .grp_b5ds = 0x00000030, - .grp_b6ds = 0x00000030, - .grp_b7ds = 0x00000030, -}; - -const struct mx6_mmdc_calibration mx6q_mmcd_calib = { - .p0_mpwldectrl0 = 0x0016001A, - .p0_mpwldectrl1 = 0x0023001C, - .p1_mpwldectrl0 = 0x0028003A, - .p1_mpwldectrl1 = 0x001F002C, - .p0_mpdgctrl0 = 0x43440354, - .p0_mpdgctrl1 = 0x033C033C, - .p1_mpdgctrl0 = 0x43300368, - .p1_mpdgctrl1 = 0x03500330, - .p0_mprddlctl = 0x3228242E, - .p1_mprddlctl = 0x2C2C2636, - .p0_mpwrdlctl = 0x36323A38, - .p1_mpwrdlctl = 0x42324440, -}; - -const struct mx6_mmdc_calibration mx6q_2g_mmcd_calib = { - .p0_mpwldectrl0 = 0x00080016, - .p0_mpwldectrl1 = 0x001D0016, - .p1_mpwldectrl0 = 0x0018002C, - .p1_mpwldectrl1 = 0x000D001D, - .p0_mpdgctrl0 = 0x43200334, - .p0_mpdgctrl1 = 0x0320031C, - .p1_mpdgctrl0 = 0x0344034C, - .p1_mpdgctrl1 = 0x03380314, - .p0_mprddlctl = 0x3E36383A, - .p1_mprddlctl = 0x38363240, - .p0_mpwrdlctl = 0x36364238, - .p1_mpwrdlctl = 0x4230423E, -}; - -static const struct mx6_mmdc_calibration mx6s_mmcd_calib = { - .p0_mpwldectrl0 = 0x00480049, - .p0_mpwldectrl1 = 0x00410044, - .p0_mpdgctrl0 = 0x42480248, - .p0_mpdgctrl1 = 0x023C023C, - .p0_mprddlctl = 0x40424644, - .p0_mpwrdlctl = 0x34323034, -}; - -const struct mx6_mmdc_calibration mx6dl_mmcd_calib = { - .p0_mpwldectrl0 = 0x0043004B, - .p0_mpwldectrl1 = 0x003A003E, - .p1_mpwldectrl0 = 0x0047004F, - .p1_mpwldectrl1 = 0x004E0061, - .p0_mpdgctrl0 = 0x42500250, - .p0_mpdgctrl1 = 0x0238023C, - .p1_mpdgctrl0 = 0x42640264, - .p1_mpdgctrl1 = 0x02500258, - .p0_mprddlctl = 0x40424846, - .p1_mprddlctl = 0x46484842, - .p0_mpwrdlctl = 0x38382C30, - .p1_mpwrdlctl = 0x34343430, -}; - -static struct mx6_ddr3_cfg mem_ddr_2g = { - .mem_speed = 1600, - .density = 2, - .width = 16, - .banks = 8, - .rowaddr = 14, - .coladdr = 10, - .pagesz = 2, - .trcd = 1310, - .trcmin = 4875, - .trasmin = 3500, -}; - -static struct mx6_ddr3_cfg mem_ddr_4g = { - .mem_speed = 1600, - .density = 4, - .width = 16, - .banks = 8, - .rowaddr = 15, - .coladdr = 10, - .pagesz = 2, - .trcd = 1310, - .trcmin = 4875, - .trasmin = 3500, -}; - -static void ccgr_init(void) -{ - struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; - - writel(0x00C03F3F, &ccm->CCGR0); - writel(0x0030FC03, &ccm->CCGR1); - writel(0x0FFFC000, &ccm->CCGR2); - writel(0x3FF00000, &ccm->CCGR3); - writel(0x00FFF300, &ccm->CCGR4); - writel(0x0F0000C3, &ccm->CCGR5); - writel(0x000003FF, &ccm->CCGR6); -} - -/* Define a minimal structure so that the part number can be read via SPL */ -struct mfgdata { - unsigned char tsize; - /* size of checksummed part in bytes */ - unsigned char ckcnt; - /* checksum corrected byte */ - unsigned char cksum; - /* decimal serial number, packed BCD */ - unsigned char serial[6]; - /* part number, right justified, ASCII */ - unsigned char pn[16]; -}; - -static void conv_ascii(unsigned char *dst, unsigned char *src, int len) -{ - int remain = len; - unsigned char *sptr = src; - unsigned char *dptr = dst; - - while (remain) { - if (*sptr) { - *dptr = *sptr; - dptr++; - } - sptr++; - remain--; - } - *dptr = 0x0; -} - -#define CFG_MFG_ADDR_OFFSET (spi->size - SZ_16K) -static bool is_2gb(void) -{ - struct spi_flash *spi; - int ret; - char buf[sizeof(struct mfgdata)]; - struct mfgdata *data = (struct mfgdata *)buf; - unsigned char outbuf[32]; - - spi = spi_flash_probe(CONFIG_ENV_SPI_BUS, - CONFIG_ENV_SPI_CS, - CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); - ret = spi_flash_read(spi, CFG_MFG_ADDR_OFFSET, sizeof(struct mfgdata), - buf); - if (ret) - return false; - - /* Congatec Part Numbers 104 and 105 have 2GiB of RAM */ - conv_ascii(outbuf, data->pn, sizeof(data->pn)); - if (!memcmp(outbuf, "016104", 6) || !memcmp(outbuf, "016105", 6)) - return true; - else - return false; -} - -static void spl_dram_init(int width) -{ - struct mx6_ddr_sysinfo sysinfo = { - /* width of data bus:0=16,1=32,2=64 */ - .dsize = width / 32, - /* config for full 4GB range so that get_mem_size() works */ - .cs_density = 32, /* 32Gb per CS */ - /* single chip select */ - .ncs = 1, - .cs1_mirror = 0, - .rtt_wr = 2, - .rtt_nom = 2, - .walat = 0, - .ralat = 5, - .mif3_mode = 3, - .bi_on = 1, - .sde_to_rst = 0x0d, - .rst_to_cke = 0x20, - .refsel = 1, /* Refresh cycles at 32KHz */ - .refr = 7, /* 8 refresh commands per refresh cycle */ - }; - - if (is_cpu_type(MXC_CPU_MX6Q) && is_2gb()) { - mx6dq_dram_iocfg(width, &mx6q_ddr_ioregs, &mx6q_grp_ioregs); - mx6_dram_cfg(&sysinfo, &mx6q_2g_mmcd_calib, &mem_ddr_4g); - return; - } - - if (is_mx6dq()) { - mx6dq_dram_iocfg(width, &mx6q_ddr_ioregs, &mx6q_grp_ioregs); - mx6_dram_cfg(&sysinfo, &mx6q_mmcd_calib, &mem_ddr_2g); - } else if (is_cpu_type(MXC_CPU_MX6SOLO)) { - sysinfo.walat = 1; - mx6sdl_dram_iocfg(width, &mx6dl_ddr_ioregs, &mx6sdl_grp_ioregs); - mx6_dram_cfg(&sysinfo, &mx6s_mmcd_calib, &mem_ddr_4g); - } else if (is_cpu_type(MXC_CPU_MX6DL)) { - sysinfo.walat = 1; - mx6sdl_dram_iocfg(width, &mx6dl_ddr_ioregs, &mx6sdl_grp_ioregs); - mx6_dram_cfg(&sysinfo, &mx6dl_mmcd_calib, &mem_ddr_2g); - } -} - -void board_init_f(ulong dummy) -{ - /* setup AIPS and disable watchdog */ - arch_cpu_init(); - - ccgr_init(); - gpr_init(); - - /* iomux and setup of i2c */ - board_early_init_f(); - - /* setup GP timer */ - timer_init(); - - /* UART clocks enabled and gd valid - init serial console */ - preloader_console_init(); - - /* Needed for malloc() to work in SPL prior to board_init_r() */ - spl_init(); - - /* DDR initialization */ - if (is_cpu_type(MXC_CPU_MX6SOLO)) - spl_dram_init(32); - else - spl_dram_init(64); - - /* Clear the BSS. */ - memset(__bss_start, 0, __bss_end - __bss_start); - - /* load/boot image from boot device */ - board_init_r(NULL, 0); -} -#endif diff --git a/configs/cgtqmx6eval_defconfig b/configs/cgtqmx6eval_defconfig deleted file mode 100644 index 26f74662f80a..000000000000 --- a/configs/cgtqmx6eval_defconfig +++ /dev/null @@ -1,99 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x17800000 -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0xC0000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 -CONFIG_MX6QDL=y -CONFIG_TARGET_CGTQMX6EVAL=y -CONFIG_SPL_TEXT_BASE=0x00908000 -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_SUPPORT_RAW_INITRD=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" -CONFIG_BOOTDELAY=3 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_MISC_INIT_R=y -CONFIG_SPL_FS_EXT4=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_SPI_LOAD=y -CONFIG_SPL_WATCHDOG_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="CGT-QMX6-Quad U-Boot > " -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SATA=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_BOUNCE_BUFFER=y -CONFIG_DWC_AHSATA=y -CONFIG_DFU_MMC=y -CONFIG_DFU_SF=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_BUF_ADDR=0x12000000 -CONFIG_FSL_USDHC=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=20000000 -CONFIG_PHYLIB=y -CONFIG_PHY_ATHEROS=y -CONFIG_MII=y -CONFIG_MXC_UART=y -CONFIG_SPI=y -CONFIG_MXC_SPI=y -CONFIG_IMX_THERMAL=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_KEYBOARD=y -CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Congatec" -CONFIG_USB_GADGET_VENDOR_NUM=0x0525 -CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 -CONFIG_CI_UDC=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_ASIX=y -CONFIG_DM_VIDEO=y -# CONFIG_BACKLIGHT is not set -# CONFIG_CMD_VIDCONSOLE is not set -# CONFIG_VIDEO_BPP8 is not set -# CONFIG_VIDEO_BPP32 is not set -# CONFIG_VIDEO_ANSI is not set -CONFIG_SYS_WHITE_ON_BLACK=y -# CONFIG_PANEL is not set -CONFIG_VIDEO_IPUV3=y -CONFIG_SPLASH_SCREEN=y -CONFIG_SPLASH_SCREEN_ALIGN=y -CONFIG_VIDEO_BMP_RLE8=y -CONFIG_BMP_16BPP=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h deleted file mode 100644 index bdd5973cb715..000000000000 --- a/include/configs/cgtqmx6eval.h +++ /dev/null @@ -1,197 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * - * Congatec Conga-QEVAl board configuration file. - * - * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. - * Based on Freescale i.MX6Q Sabre Lite board configuration file. - * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> - * Leo Sartre, lsartre@adeneo-embedded.com - */ - -#ifndef __CONFIG_CGTQMX6EVAL_H -#define __CONFIG_CGTQMX6EVAL_H - -#include <linux/stringify.h> - -#include "mx6_common.h" - -#define CONFIG_MACH_TYPE 4122 - -#ifdef CONFIG_SPL -#include "imx6_spl.h" -#endif - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) - -#define CONFIG_MXC_UART_BASE UART2_BASE - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 - -/* SPI NOR */ -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_SST - -/* Thermal support */ - -/* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_SPEED 100000 - -/* PMIC */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_PFUZE100 -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 - -/* USB Configs */ -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */ - -#define CONFIG_USBD_HS - -/* Framebuffer */ -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_IMX_HDMI - -/* SATA */ -#define CONFIG_SYS_SATA_MAX_DEVICE 1 -#define CONFIG_DWC_AHSATA_PORT_ID 0 -#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR -#define CONFIG_LBA48 - -/* Ethernet */ -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 6 - -/* Command definition */ - -#define CONFIG_MXC_UART_BASE UART2_BASE -#define CONSOLE_DEV "ttymxc1" -#define CONFIG_MMCROOT "/dev/mmcblk0p2" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "image=zImage\0" \ - "fdtfile=undefined\0" \ - "fdt_addr_r=0x18000000\0" \ - "boot_fdt=try\0" \ - "ip_dyn=yes\0" \ - "console=" CONSOLE_DEV "\0" \ - "dfuspi=dfu 0 sf 0:0:10000000:0\0" \ - "dfu_alt_info_spl=spl raw 0x400\0" \ - "dfu_alt_info_img=u-boot raw 0x10000\0" \ - "dfu_alt_info=spl raw 0x400\0" \ - "bootm_size=0x10000000\0" \ - "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=1\0" \ - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ - "update_sd_firmware=" \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "if mmc dev ${mmcdev}; then " \ - "if ${get_cmd} ${update_sd_firmware_filename}; then " \ - "setexpr fw_sz ${filesize} / 0x200; " \ - "setexpr fw_sz ${fw_sz} + 1; " \ - "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ - "fi; " \ - "fi\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ - "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "bootz ${loadaddr} - ${fdt_addr_r}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "findfdt="\ - "if test $board_rev = MX6Q ; then " \ - "setenv fdtfile imx6q-qmx6.dtb; fi; " \ - "if test $board_rev = MX6DL ; then " \ - "setenv fdtfile imx6dl-qmx6.dtb; fi; " \ - "if test $fdtfile = undefined; then " \ - "echo WARNING: Could not determine dtb to use; fi; \0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "${get_cmd} ${image}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \ - "bootz ${loadaddr} - ${fdt_addr_r}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "spilock=sf probe && sf protect lock 0x3f0000 0x10000;"\ - -#define CONFIG_BOOTCOMMAND \ - "run spilock;" \ - "run findfdt; " \ - "mmc dev ${mmcdev};" \ - "if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -#endif /* __CONFIG_CGTQMX6EVAL_H */