Splitting the header will help synchronizing the defines again with Linux.
Acked-by: Neha Malcom Francis n-francis@ti.com Tested-by: Love Kumar love.kumar@amd.com Signed-off-by: Neil Armstrong neil.armstrong@linaro.org --- drivers/ufs/ufs.h | 329 +------------------------------------------------- drivers/ufs/ufshci.h | 334 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 335 insertions(+), 328 deletions(-)
diff --git a/drivers/ufs/ufs.h b/drivers/ufs/ufs.h index f4f042005e7fc2638ea6b33f26839c668d22bc9e..53137fae3a81ce87d744dd56c49db2a8ffba1d3d 100644 --- a/drivers/ufs/ufs.h +++ b/drivers/ufs/ufs.h @@ -4,6 +4,7 @@
#include <linux/types.h> #include <asm/io.h> +#include "ufshci.h" #include "unipro.h"
struct udevice; @@ -14,11 +15,6 @@ struct udevice; #define RESPONSE_UPIU_SENSE_DATA_LENGTH 18 #define UFS_MAX_LUNS 0x7F
-enum { - TASK_REQ_UPIU_SIZE_DWORDS = 8, - TASK_RSP_UPIU_SIZE_DWORDS = 8, - ALIGNED_UPIU_SIZE = 512, -};
/* UFS device power modes */ enum ufs_dev_pwr_mode { @@ -84,44 +80,6 @@ enum { /* Offset of the response code in the UPIU header */ #define UPIU_RSP_CODE_OFFSET 8
-/* To accommodate UFS2.0 required Command type */ -enum { - UTP_CMD_TYPE_UFS_STORAGE = 0x1, -}; - -enum { - UTP_SCSI_COMMAND = 0x00000000, - UTP_NATIVE_UFS_COMMAND = 0x10000000, - UTP_DEVICE_MANAGEMENT_FUNCTION = 0x20000000, - UTP_REQ_DESC_INT_CMD = 0x01000000, -}; - -/* UTP Transfer Request Data Direction (DD) */ -enum { - UTP_NO_DATA_TRANSFER = 0x00000000, - UTP_HOST_TO_DEVICE = 0x02000000, - UTP_DEVICE_TO_HOST = 0x04000000, -}; - -/* Overall command status values */ -enum { - OCS_SUCCESS = 0x0, - OCS_INVALID_CMD_TABLE_ATTR = 0x1, - OCS_INVALID_PRDT_ATTR = 0x2, - OCS_MISMATCH_DATA_BUF_SIZE = 0x3, - OCS_MISMATCH_RESP_UPIU_SIZE = 0x4, - OCS_PEER_COMM_FAILURE = 0x5, - OCS_ABORTED = 0x6, - OCS_FATAL_ERROR = 0x7, - OCS_INVALID_COMMAND_STATUS = 0x0F, - MASK_OCS = 0x0F, -}; - -/* The maximum length of the data byte count field in the PRDT is 256KB */ -#define PRDT_DATA_BYTE_COUNT_MAX (256 * 1024) -/* The granularity of the data byte count field in the PRDT is 32-bit */ -#define PRDT_DATA_BYTE_COUNT_PAD 4 - #define GENERAL_UPIU_REQUEST_SIZE (sizeof(struct utp_upiu_req)) #define QUERY_DESC_MAX_SIZE 255 #define QUERY_DESC_MIN_SIZE 2 @@ -297,79 +255,6 @@ enum desc_header_offset { QUERY_DESC_DESC_TYPE_OFFSET = 0x01, };
-struct ufshcd_sg_entry { - __le32 base_addr; - __le32 upper_addr; - __le32 reserved; - __le32 size; -}; - -#define MAX_BUFF 128 -/** - * struct utp_transfer_cmd_desc - UFS Command Descriptor structure - * @command_upiu: Command UPIU Frame address - * @response_upiu: Response UPIU Frame address - * @prd_table: Physical Region Descriptor - */ -struct utp_transfer_cmd_desc { - u8 command_upiu[ALIGNED_UPIU_SIZE]; - u8 response_upiu[ALIGNED_UPIU_SIZE]; - struct ufshcd_sg_entry prd_table[MAX_BUFF]; -}; - -/** - * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD - * @dword0: Descriptor Header DW0 - * @dword1: Descriptor Header DW1 - * @dword2: Descriptor Header DW2 - * @dword3: Descriptor Header DW3 - */ -struct request_desc_header { - __le32 dword_0; - __le32 dword_1; - __le32 dword_2; - __le32 dword_3; -}; - -/** - * struct utp_transfer_req_desc - UTRD structure - * @header: UTRD header DW-0 to DW-3 - * @command_desc_base_addr_lo: UCD base address low DW-4 - * @command_desc_base_addr_hi: UCD base address high DW-5 - * @response_upiu_length: response UPIU length DW-6 - * @response_upiu_offset: response UPIU offset DW-6 - * @prd_table_length: Physical region descriptor length DW-7 - * @prd_table_offset: Physical region descriptor offset DW-7 - */ -struct utp_transfer_req_desc { - /* DW 0-3 */ - struct request_desc_header header; - - /* DW 4-5*/ - __le32 command_desc_base_addr_lo; - __le32 command_desc_base_addr_hi; - - /* DW 6 */ - __le16 response_upiu_length; - __le16 response_upiu_offset; - - /* DW 7 */ - __le16 prd_table_length; - __le16 prd_table_offset; -}; - -/** - * struct utp_upiu_header - UPIU header structure - * @dword_0: UPIU header DW-0 - * @dword_1: UPIU header DW-1 - * @dword_2: UPIU header DW-2 - */ -struct utp_upiu_header { - __be32 dword_0; - __be32 dword_1; - __be32 dword_2; -}; - /** * struct utp_upiu_query - upiu request buffer structure for * query request. @@ -403,27 +288,6 @@ struct utp_upiu_cmd { u8 cdb[UFS_CDB_SIZE]; };
-/* - * UTMRD structure. - */ -struct utp_task_req_desc { - /* DW 0-3 */ - struct request_desc_header header; - - /* DW 4-11 - Task request UPIU structure */ - struct utp_upiu_header req_header; - __be32 input_param1; - __be32 input_param2; - __be32 input_param3; - __be32 __reserved1[2]; - - /* DW 12-19 - Task Management Response UPIU structure */ - struct utp_upiu_header rsp_header; - __be32 output_param1; - __be32 output_param2; - __be32 __reserved2[3]; -}; - /** * struct utp_upiu_req - general upiu request structure * @header:UPIU header structure DW-0 to DW-2 @@ -551,63 +415,6 @@ struct uic_command { int result; };
-/* GenSelectorIndex calculation macros for M-PHY attributes */ -#define UIC_ARG_MPHY_TX_GEN_SEL_INDEX(lane) (lane) -#define UIC_ARG_MPHY_RX_GEN_SEL_INDEX(lane) (PA_MAXDATALANES + (lane)) - -#define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ - ((sel) & 0xFFFF)) -#define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) -#define UIC_ARG_ATTR_TYPE(t) (((t) & 0xFF) << 16) -#define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF) - -/* Link Status*/ -enum link_status { - UFSHCD_LINK_IS_DOWN = 1, - UFSHCD_LINK_IS_UP = 2, -}; - -#define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ - ((sel) & 0xFFFF)) -#define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) -#define UIC_ARG_ATTR_TYPE(t) (((t) & 0xFF) << 16) -#define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF) - -/* UIC Commands */ -enum uic_cmd_dme { - UIC_CMD_DME_GET = 0x01, - UIC_CMD_DME_SET = 0x02, - UIC_CMD_DME_PEER_GET = 0x03, - UIC_CMD_DME_PEER_SET = 0x04, - UIC_CMD_DME_POWERON = 0x10, - UIC_CMD_DME_POWEROFF = 0x11, - UIC_CMD_DME_ENABLE = 0x12, - UIC_CMD_DME_RESET = 0x14, - UIC_CMD_DME_END_PT_RST = 0x15, - UIC_CMD_DME_LINK_STARTUP = 0x16, - UIC_CMD_DME_HIBER_ENTER = 0x17, - UIC_CMD_DME_HIBER_EXIT = 0x18, - UIC_CMD_DME_TEST_MODE = 0x1A, -}; - -/* UIC Config result code / Generic error code */ -enum { - UIC_CMD_RESULT_SUCCESS = 0x00, - UIC_CMD_RESULT_INVALID_ATTR = 0x01, - UIC_CMD_RESULT_FAILURE = 0x01, - UIC_CMD_RESULT_INVALID_ATTR_VALUE = 0x02, - UIC_CMD_RESULT_READ_ONLY_ATTR = 0x03, - UIC_CMD_RESULT_WRITE_ONLY_ATTR = 0x04, - UIC_CMD_RESULT_BAD_INDEX = 0x05, - UIC_CMD_RESULT_LOCKED_ATTR = 0x06, - UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX = 0x07, - UIC_CMD_RESULT_PEER_COMM_FAILURE = 0x08, - UIC_CMD_RESULT_BUSY = 0x09, - UIC_CMD_RESULT_DME_FAILURE = 0x0A, -}; - -#define MASK_UIC_COMMAND_RESULT 0xFF - /* Host <-> Device UniPro Link state */ enum uic_link_state { UIC_LINK_OFF_STATE = 0, /* Link powered down or disabled */ @@ -940,17 +747,6 @@ static inline int ufshcd_vops_device_reset(struct ufs_hba *hba) return 0; }
-/* Controller UFSHCI version */ -enum { - UFSHCI_VERSION_10 = 0x00010000, /* 1.0 */ - UFSHCI_VERSION_11 = 0x00010100, /* 1.1 */ - UFSHCI_VERSION_20 = 0x00000200, /* 2.0 */ - UFSHCI_VERSION_21 = 0x00000210, /* 2.1 */ - UFSHCI_VERSION_30 = 0x00000300, /* 3.0 */ - UFSHCI_VERSION_31 = 0x00000310, /* 3.1 */ - UFSHCI_VERSION_40 = 0x00000400, /* 4.0 */ -}; - /* Interrupt disable masks */ enum { /* Interrupt disable mask for UFSHCI v1.0 */ @@ -964,123 +760,6 @@ enum { INTERRUPT_MASK_ALL_VER_21 = 0x71FFF, };
-/* UFSHCI Registers */ -enum { - REG_CONTROLLER_CAPABILITIES = 0x00, - REG_UFS_VERSION = 0x08, - REG_CONTROLLER_DEV_ID = 0x10, - REG_CONTROLLER_PROD_ID = 0x14, - REG_AUTO_HIBERNATE_IDLE_TIMER = 0x18, - REG_INTERRUPT_STATUS = 0x20, - REG_INTERRUPT_ENABLE = 0x24, - REG_CONTROLLER_STATUS = 0x30, - REG_CONTROLLER_ENABLE = 0x34, - REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER = 0x38, - REG_UIC_ERROR_CODE_DATA_LINK_LAYER = 0x3C, - REG_UIC_ERROR_CODE_NETWORK_LAYER = 0x40, - REG_UIC_ERROR_CODE_TRANSPORT_LAYER = 0x44, - REG_UIC_ERROR_CODE_DME = 0x48, - REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL = 0x4C, - REG_UTP_TRANSFER_REQ_LIST_BASE_L = 0x50, - REG_UTP_TRANSFER_REQ_LIST_BASE_H = 0x54, - REG_UTP_TRANSFER_REQ_DOOR_BELL = 0x58, - REG_UTP_TRANSFER_REQ_LIST_CLEAR = 0x5C, - REG_UTP_TRANSFER_REQ_LIST_RUN_STOP = 0x60, - REG_UTP_TASK_REQ_LIST_BASE_L = 0x70, - REG_UTP_TASK_REQ_LIST_BASE_H = 0x74, - REG_UTP_TASK_REQ_DOOR_BELL = 0x78, - REG_UTP_TASK_REQ_LIST_CLEAR = 0x7C, - REG_UTP_TASK_REQ_LIST_RUN_STOP = 0x80, - REG_UIC_COMMAND = 0x90, - REG_UIC_COMMAND_ARG_1 = 0x94, - REG_UIC_COMMAND_ARG_2 = 0x98, - REG_UIC_COMMAND_ARG_3 = 0x9C, - - UFSHCI_REG_SPACE_SIZE = 0xA0, - - REG_UFS_CCAP = 0x100, - REG_UFS_CRYPTOCAP = 0x104, - - UFSHCI_CRYPTO_REG_SPACE_SIZE = 0x400, -}; - -/* Controller capability masks */ -enum { - MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F, - MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000, - MASK_AUTO_HIBERN8_SUPPORT = 0x00800000, - MASK_64_ADDRESSING_SUPPORT = 0x01000000, - MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000, - MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000, -}; - -/* Interrupt Status 20h */ -#define UTP_TRANSFER_REQ_COMPL 0x1 -#define UIC_DME_END_PT_RESET 0x2 -#define UIC_ERROR 0x4 -#define UIC_TEST_MODE 0x8 -#define UIC_POWER_MODE 0x10 -#define UIC_HIBERNATE_EXIT 0x20 -#define UIC_HIBERNATE_ENTER 0x40 -#define UIC_LINK_LOST 0x80 -#define UIC_LINK_STARTUP 0x100 -#define UTP_TASK_REQ_COMPL 0x200 -#define UIC_COMMAND_COMPL 0x400 -#define DEVICE_FATAL_ERROR 0x800 -#define CONTROLLER_FATAL_ERROR 0x10000 -#define SYSTEM_BUS_FATAL_ERROR 0x20000 - -#define UFSHCD_UIC_PWR_MASK (UIC_HIBERNATE_ENTER |\ - UIC_HIBERNATE_EXIT |\ - UIC_POWER_MODE) - -#define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL | UIC_POWER_MODE) - -#define UFSHCD_ERROR_MASK (UIC_ERROR |\ - DEVICE_FATAL_ERROR |\ - CONTROLLER_FATAL_ERROR |\ - SYSTEM_BUS_FATAL_ERROR) - -#define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\ - CONTROLLER_FATAL_ERROR |\ - SYSTEM_BUS_FATAL_ERROR) - -/* Host Controller Enable 0x34h */ -#define CONTROLLER_ENABLE 0x1 -#define CONTROLLER_DISABLE 0x0 -/* HCS - Host Controller Status 30h */ -#define DEVICE_PRESENT 0x1 -#define UTP_TRANSFER_REQ_LIST_READY 0x2 -#define UTP_TASK_REQ_LIST_READY 0x4 -#define UIC_COMMAND_READY 0x8 -#define HOST_ERROR_INDICATOR 0x10 -#define DEVICE_ERROR_INDICATOR 0x20 -#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8) - -#define UFSHCD_STATUS_READY (UTP_TRANSFER_REQ_LIST_READY |\ - UTP_TASK_REQ_LIST_READY |\ - UIC_COMMAND_READY) - -enum { - PWR_OK = 0x0, - PWR_LOCAL = 0x01, - PWR_REMOTE = 0x02, - PWR_BUSY = 0x03, - PWR_ERROR_CAP = 0x04, - PWR_FATAL_ERROR = 0x05, -}; - -/* UICCMD - UIC Command */ -#define COMMAND_OPCODE_MASK 0xFF -#define GEN_SELECTOR_INDEX_MASK 0xFFFF - -#define MIB_ATTRIBUTE_MASK UFS_MASK(0xFFFF, 16) -#define RESET_LEVEL 0xFF - -#define ATTR_SET_TYPE_MASK UFS_MASK(0xFF, 16) -#define CFG_RESULT_CODE_MASK 0xFF -#define GENERIC_ERROR_CODE_MASK 0xFF - #define ufshcd_writel(hba, val, reg) \ writel((val), (hba)->mmio_base + (reg)) #define ufshcd_readl(hba, reg) \ @@ -1103,12 +782,6 @@ static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg) ufshcd_writel(hba, tmp, reg); }
-/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */ -#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT 0x1 - -/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */ -#define UTP_TASK_REQ_LIST_RUN_STOP_BIT 0x1 - int ufshcd_probe(struct udevice *dev, struct ufs_hba_ops *hba_ops);
#endif diff --git a/drivers/ufs/ufshci.h b/drivers/ufs/ufshci.h new file mode 100644 index 0000000000000000000000000000000000000000..db30812b176f9e36529452e260b847241f97fdab --- /dev/null +++ b/drivers/ufs/ufshci.h @@ -0,0 +1,334 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +#ifndef __UFSHCI_H +#define __UFSHCI_H + +enum { + TASK_REQ_UPIU_SIZE_DWORDS = 8, + TASK_RSP_UPIU_SIZE_DWORDS = 8, + ALIGNED_UPIU_SIZE = 512, +}; + +/* To accommodate UFS2.0 required Command type */ +enum { + UTP_CMD_TYPE_UFS_STORAGE = 0x1, +}; + +enum { + UTP_SCSI_COMMAND = 0x00000000, + UTP_NATIVE_UFS_COMMAND = 0x10000000, + UTP_DEVICE_MANAGEMENT_FUNCTION = 0x20000000, + UTP_REQ_DESC_INT_CMD = 0x01000000, +}; + +/* UTP Transfer Request Data Direction (DD) */ +enum { + UTP_NO_DATA_TRANSFER = 0x00000000, + UTP_HOST_TO_DEVICE = 0x02000000, + UTP_DEVICE_TO_HOST = 0x04000000, +}; + +/* Overall command status values */ +enum { + OCS_SUCCESS = 0x0, + OCS_INVALID_CMD_TABLE_ATTR = 0x1, + OCS_INVALID_PRDT_ATTR = 0x2, + OCS_MISMATCH_DATA_BUF_SIZE = 0x3, + OCS_MISMATCH_RESP_UPIU_SIZE = 0x4, + OCS_PEER_COMM_FAILURE = 0x5, + OCS_ABORTED = 0x6, + OCS_FATAL_ERROR = 0x7, + OCS_INVALID_COMMAND_STATUS = 0x0F, + MASK_OCS = 0x0F, +}; + +/* The maximum length of the data byte count field in the PRDT is 256KB */ +#define PRDT_DATA_BYTE_COUNT_MAX (256 * 1024) +/* The granularity of the data byte count field in the PRDT is 32-bit */ +#define PRDT_DATA_BYTE_COUNT_PAD 4 + +/* Controller UFSHCI version */ +enum { + UFSHCI_VERSION_10 = 0x00010000, /* 1.0 */ + UFSHCI_VERSION_11 = 0x00010100, /* 1.1 */ + UFSHCI_VERSION_20 = 0x00000200, /* 2.0 */ + UFSHCI_VERSION_21 = 0x00000210, /* 2.1 */ + UFSHCI_VERSION_30 = 0x00000300, /* 3.0 */ + UFSHCI_VERSION_31 = 0x00000310, /* 3.1 */ + UFSHCI_VERSION_40 = 0x00000400, /* 4.0 */ +}; + +/* UFSHCI Registers */ +enum { + REG_CONTROLLER_CAPABILITIES = 0x00, + REG_UFS_VERSION = 0x08, + REG_CONTROLLER_DEV_ID = 0x10, + REG_CONTROLLER_PROD_ID = 0x14, + REG_AUTO_HIBERNATE_IDLE_TIMER = 0x18, + REG_INTERRUPT_STATUS = 0x20, + REG_INTERRUPT_ENABLE = 0x24, + REG_CONTROLLER_STATUS = 0x30, + REG_CONTROLLER_ENABLE = 0x34, + REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER = 0x38, + REG_UIC_ERROR_CODE_DATA_LINK_LAYER = 0x3C, + REG_UIC_ERROR_CODE_NETWORK_LAYER = 0x40, + REG_UIC_ERROR_CODE_TRANSPORT_LAYER = 0x44, + REG_UIC_ERROR_CODE_DME = 0x48, + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL = 0x4C, + REG_UTP_TRANSFER_REQ_LIST_BASE_L = 0x50, + REG_UTP_TRANSFER_REQ_LIST_BASE_H = 0x54, + REG_UTP_TRANSFER_REQ_DOOR_BELL = 0x58, + REG_UTP_TRANSFER_REQ_LIST_CLEAR = 0x5C, + REG_UTP_TRANSFER_REQ_LIST_RUN_STOP = 0x60, + REG_UTP_TASK_REQ_LIST_BASE_L = 0x70, + REG_UTP_TASK_REQ_LIST_BASE_H = 0x74, + REG_UTP_TASK_REQ_DOOR_BELL = 0x78, + REG_UTP_TASK_REQ_LIST_CLEAR = 0x7C, + REG_UTP_TASK_REQ_LIST_RUN_STOP = 0x80, + REG_UIC_COMMAND = 0x90, + REG_UIC_COMMAND_ARG_1 = 0x94, + REG_UIC_COMMAND_ARG_2 = 0x98, + REG_UIC_COMMAND_ARG_3 = 0x9C, + + UFSHCI_REG_SPACE_SIZE = 0xA0, + + REG_UFS_CCAP = 0x100, + REG_UFS_CRYPTOCAP = 0x104, + + UFSHCI_CRYPTO_REG_SPACE_SIZE = 0x400, +}; + +/* Controller capability masks */ +enum { + MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F, + MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000, + MASK_AUTO_HIBERN8_SUPPORT = 0x00800000, + MASK_64_ADDRESSING_SUPPORT = 0x01000000, + MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000, + MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000, +}; + +/* Interrupt Status 20h */ +#define UTP_TRANSFER_REQ_COMPL 0x1 +#define UIC_DME_END_PT_RESET 0x2 +#define UIC_ERROR 0x4 +#define UIC_TEST_MODE 0x8 +#define UIC_POWER_MODE 0x10 +#define UIC_HIBERNATE_EXIT 0x20 +#define UIC_HIBERNATE_ENTER 0x40 +#define UIC_LINK_LOST 0x80 +#define UIC_LINK_STARTUP 0x100 +#define UTP_TASK_REQ_COMPL 0x200 +#define UIC_COMMAND_COMPL 0x400 +#define DEVICE_FATAL_ERROR 0x800 +#define CONTROLLER_FATAL_ERROR 0x10000 +#define SYSTEM_BUS_FATAL_ERROR 0x20000 + +#define UFSHCD_UIC_PWR_MASK (UIC_HIBERNATE_ENTER |\ + UIC_HIBERNATE_EXIT |\ + UIC_POWER_MODE) + +#define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL | UIC_POWER_MODE) + +#define UFSHCD_ERROR_MASK (UIC_ERROR |\ + DEVICE_FATAL_ERROR |\ + CONTROLLER_FATAL_ERROR |\ + SYSTEM_BUS_FATAL_ERROR) + +#define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\ + CONTROLLER_FATAL_ERROR |\ + SYSTEM_BUS_FATAL_ERROR) + +/* Host Controller Enable 0x34h */ +#define CONTROLLER_ENABLE 0x1 +#define CONTROLLER_DISABLE 0x0 +/* HCS - Host Controller Status 30h */ +#define DEVICE_PRESENT 0x1 +#define UTP_TRANSFER_REQ_LIST_READY 0x2 +#define UTP_TASK_REQ_LIST_READY 0x4 +#define UIC_COMMAND_READY 0x8 +#define HOST_ERROR_INDICATOR 0x10 +#define DEVICE_ERROR_INDICATOR 0x20 +#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8) + +#define UFSHCD_STATUS_READY (UTP_TRANSFER_REQ_LIST_READY |\ + UTP_TASK_REQ_LIST_READY |\ + UIC_COMMAND_READY) + +enum { + PWR_OK = 0x0, + PWR_LOCAL = 0x01, + PWR_REMOTE = 0x02, + PWR_BUSY = 0x03, + PWR_ERROR_CAP = 0x04, + PWR_FATAL_ERROR = 0x05, +}; + +/* UICCMD - UIC Command */ +#define COMMAND_OPCODE_MASK 0xFF +#define GEN_SELECTOR_INDEX_MASK 0xFFFF + +#define MIB_ATTRIBUTE_MASK UFS_MASK(0xFFFF, 16) +#define RESET_LEVEL 0xFF + +#define ATTR_SET_TYPE_MASK UFS_MASK(0xFF, 16) +#define CFG_RESULT_CODE_MASK 0xFF +#define GENERIC_ERROR_CODE_MASK 0xFF + +/* GenSelectorIndex calculation macros for M-PHY attributes */ +#define UIC_ARG_MPHY_TX_GEN_SEL_INDEX(lane) (lane) +#define UIC_ARG_MPHY_RX_GEN_SEL_INDEX(lane) (PA_MAXDATALANES + (lane)) + +#define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ + ((sel) & 0xFFFF)) +#define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) +#define UIC_ARG_ATTR_TYPE(t) (((t) & 0xFF) << 16) +#define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF) + +/* Link Status*/ +enum link_status { + UFSHCD_LINK_IS_DOWN = 1, + UFSHCD_LINK_IS_UP = 2, +}; + +#define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ + ((sel) & 0xFFFF)) +#define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) +#define UIC_ARG_ATTR_TYPE(t) (((t) & 0xFF) << 16) +#define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF) + +/* UIC Commands */ +enum uic_cmd_dme { + UIC_CMD_DME_GET = 0x01, + UIC_CMD_DME_SET = 0x02, + UIC_CMD_DME_PEER_GET = 0x03, + UIC_CMD_DME_PEER_SET = 0x04, + UIC_CMD_DME_POWERON = 0x10, + UIC_CMD_DME_POWEROFF = 0x11, + UIC_CMD_DME_ENABLE = 0x12, + UIC_CMD_DME_RESET = 0x14, + UIC_CMD_DME_END_PT_RST = 0x15, + UIC_CMD_DME_LINK_STARTUP = 0x16, + UIC_CMD_DME_HIBER_ENTER = 0x17, + UIC_CMD_DME_HIBER_EXIT = 0x18, + UIC_CMD_DME_TEST_MODE = 0x1A, +}; + +/* UIC Config result code / Generic error code */ +enum { + UIC_CMD_RESULT_SUCCESS = 0x00, + UIC_CMD_RESULT_INVALID_ATTR = 0x01, + UIC_CMD_RESULT_FAILURE = 0x01, + UIC_CMD_RESULT_INVALID_ATTR_VALUE = 0x02, + UIC_CMD_RESULT_READ_ONLY_ATTR = 0x03, + UIC_CMD_RESULT_WRITE_ONLY_ATTR = 0x04, + UIC_CMD_RESULT_BAD_INDEX = 0x05, + UIC_CMD_RESULT_LOCKED_ATTR = 0x06, + UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX = 0x07, + UIC_CMD_RESULT_PEER_COMM_FAILURE = 0x08, + UIC_CMD_RESULT_BUSY = 0x09, + UIC_CMD_RESULT_DME_FAILURE = 0x0A, +}; + +#define MASK_UIC_COMMAND_RESULT 0xFF + +/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */ +#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT 0x1 + +/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */ +#define UTP_TASK_REQ_LIST_RUN_STOP_BIT 0x1 + +struct ufshcd_sg_entry { + __le32 base_addr; + __le32 upper_addr; + __le32 reserved; + __le32 size; +}; + +#define MAX_BUFF 128 +/** + * struct utp_transfer_cmd_desc - UFS Command Descriptor structure + * @command_upiu: Command UPIU Frame address + * @response_upiu: Response UPIU Frame address + * @prd_table: Physical Region Descriptor + */ +struct utp_transfer_cmd_desc { + u8 command_upiu[ALIGNED_UPIU_SIZE]; + u8 response_upiu[ALIGNED_UPIU_SIZE]; + struct ufshcd_sg_entry prd_table[MAX_BUFF]; +}; + +/** + * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD + * @dword0: Descriptor Header DW0 + * @dword1: Descriptor Header DW1 + * @dword2: Descriptor Header DW2 + * @dword3: Descriptor Header DW3 + */ +struct request_desc_header { + __le32 dword_0; + __le32 dword_1; + __le32 dword_2; + __le32 dword_3; +}; + +/** + * struct utp_transfer_req_desc - UTRD structure + * @header: UTRD header DW-0 to DW-3 + * @command_desc_base_addr_lo: UCD base address low DW-4 + * @command_desc_base_addr_hi: UCD base address high DW-5 + * @response_upiu_length: response UPIU length DW-6 + * @response_upiu_offset: response UPIU offset DW-6 + * @prd_table_length: Physical region descriptor length DW-7 + * @prd_table_offset: Physical region descriptor offset DW-7 + */ +struct utp_transfer_req_desc { + /* DW 0-3 */ + struct request_desc_header header; + + /* DW 4-5*/ + __le32 command_desc_base_addr_lo; + __le32 command_desc_base_addr_hi; + + /* DW 6 */ + __le16 response_upiu_length; + __le16 response_upiu_offset; + + /* DW 7 */ + __le16 prd_table_length; + __le16 prd_table_offset; +}; + +/** + * struct utp_upiu_header - UPIU header structure + * @dword_0: UPIU header DW-0 + * @dword_1: UPIU header DW-1 + * @dword_2: UPIU header DW-2 + */ +struct utp_upiu_header { + __be32 dword_0; + __be32 dword_1; + __be32 dword_2; +}; + +/* + * UTMRD structure. + */ +struct utp_task_req_desc { + /* DW 0-3 */ + struct request_desc_header header; + + /* DW 4-11 - Task request UPIU structure */ + struct utp_upiu_header req_header; + __be32 input_param1; + __be32 input_param2; + __be32 input_param3; + __be32 __reserved1[2]; + + /* DW 12-19 - Task Management Response UPIU structure */ + struct utp_upiu_header rsp_header; + __be32 output_param1; + __be32 output_param2; + __be32 __reserved2[3]; +}; + +#endif