Add support to save boot count variable in ANY filesystem. Tested with FAT and EXT.
Reviewed-by: Tom Rini trini@konsulko.com Reviewed-by: Heiko Schocher hs@denx.de Reviewed-by: Philip Oberfichtner pro@denx.de Signed-off-by: Vasileios Amoiridis vassilisamir@gmail.com --- doc/README.bootcount | 12 +++---- drivers/bootcount/Kconfig | 36 +++++++++---------- drivers/bootcount/Makefile | 2 +- .../{bootcount_ext.c => bootcount_fs.c} | 12 +++---- 4 files changed, 31 insertions(+), 31 deletions(-) rename drivers/bootcount/{bootcount_ext.c => bootcount_fs.c} (81%)
diff --git a/doc/README.bootcount b/doc/README.bootcount index f6c5f82f98..0f4ffb6828 100644 --- a/doc/README.bootcount +++ b/doc/README.bootcount @@ -23,15 +23,15 @@ It is the responsibility of some application code (typically a Linux application) to reset the variable "bootcount" to 0 when the system booted successfully, thus allowing for more boot cycles.
-CONFIG_BOOTCOUNT_EXT +CONFIG_BOOTCOUNT_FS --------------------
-This adds support for maintaining boot count in a file on an EXT filesystem. -The file to use is defined by: +This adds support for maintaining boot count in a file on a filesystem. +Supported filesystems are FAT and EXT. The file to use is defined by:
-CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE -CONFIG_SYS_BOOTCOUNT_EXT_DEVPART -CONFIG_SYS_BOOTCOUNT_EXT_NAME +CONFIG_SYS_BOOTCOUNT_FS_INTERFACE +CONFIG_SYS_BOOTCOUNT_FS_DEVPART +CONFIG_SYS_BOOTCOUNT_FS_NAME
The format of the file is:
diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig index 3c56253b1e..fbf3c56b41 100644 --- a/drivers/bootcount/Kconfig +++ b/drivers/bootcount/Kconfig @@ -25,13 +25,13 @@ config BOOTCOUNT_GENERIC Set to the address where the bootcount and bootcount magic will be stored.
-config BOOTCOUNT_EXT - bool "Boot counter on EXT filesystem" - depends on FS_EXT4 - select EXT4_WRITE +config BOOTCOUNT_FS + bool "Boot counter on a filesystem" help - Add support for maintaining boot count in a file on an EXT - filesystem. + Add support for maintaining boot count in a file on a filesystem. + This requires that you have enabled write support for the filesystem + that you will be used by the partition that you configure this feature + for.
config BOOTCOUNT_AM33XX bool "Boot counter in AM33XX RTC IP block" @@ -184,26 +184,26 @@ config SYS_BOOTCOUNT_SINGLEWORD This option enables packing boot count magic value and boot count into single word (32 bits).
-config SYS_BOOTCOUNT_EXT_INTERFACE - string "Interface on which to find boot counter EXT filesystem" +config SYS_BOOTCOUNT_FS_INTERFACE + string "Interface on which to find boot counter filesystem" default "mmc" - depends on BOOTCOUNT_EXT + depends on BOOTCOUNT_FS help Set the interface to use when locating the filesystem to use for the boot counter.
-config SYS_BOOTCOUNT_EXT_DEVPART - string "Partition of the boot counter EXT filesystem" +config SYS_BOOTCOUNT_FS_DEVPART + string "Partition of the boot counter filesystem" default "0:1" - depends on BOOTCOUNT_EXT + depends on BOOTCOUNT_FS help Set the partition to use when locating the filesystem to use for the boot counter.
-config SYS_BOOTCOUNT_EXT_NAME - string "Path and filename of the EXT filesystem based boot counter" +config SYS_BOOTCOUNT_FS_NAME + string "Path and filename of the FS filesystem based boot counter" default "/boot/failures" - depends on BOOTCOUNT_EXT + depends on BOOTCOUNT_FS help Set the filename and path of the file used to store the boot counter.
@@ -211,18 +211,18 @@ config SYS_BOOTCOUNT_ADDR hex "RAM address used for reading and writing the boot counter" default 0x44E3E000 if BOOTCOUNT_AM33XX || BOOTCOUNT_AM33XX_NVMEM default 0xE0115FF8 if ARCH_LS1043A || ARCH_LS1021A - depends on BOOTCOUNT_AM33XX || BOOTCOUNT_GENERIC || BOOTCOUNT_EXT || \ + depends on BOOTCOUNT_AM33XX || BOOTCOUNT_GENERIC || BOOTCOUNT_FS || \ BOOTCOUNT_AM33XX_NVMEM help Set the address used for reading and writing the boot counter.
config SYS_BOOTCOUNT_MAGIC hex "Magic value for the boot counter" - default 0xB001C041 if BOOTCOUNT_GENERIC || BOOTCOUNT_EXT || \ + default 0xB001C041 if BOOTCOUNT_GENERIC || BOOTCOUNT_FS || \ BOOTCOUNT_AM33XX || BOOTCOUNT_ENV || \ BOOTCOUNT_RAM || BOOTCOUNT_AT91 || DM_BOOTCOUNT default 0xB0 if BOOTCOUNT_AM33XX_NVMEM - depends on BOOTCOUNT_GENERIC || BOOTCOUNT_EXT || \ + depends on BOOTCOUNT_GENERIC || BOOTCOUNT_FS || \ BOOTCOUNT_AM33XX || BOOTCOUNT_ENV || \ BOOTCOUNT_RAM || BOOTCOUNT_AT91 || DM_BOOTCOUNT || \ BOOTCOUNT_AM33XX_NVMEM diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile index e7771f5b36..245f879633 100644 --- a/drivers/bootcount/Makefile +++ b/drivers/bootcount/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_BOOTCOUNT_AT91) += bootcount_at91.o obj-$(CONFIG_BOOTCOUNT_AM33XX) += bootcount_davinci.o obj-$(CONFIG_BOOTCOUNT_RAM) += bootcount_ram.o obj-$(CONFIG_BOOTCOUNT_ENV) += bootcount_env.o -obj-$(CONFIG_BOOTCOUNT_EXT) += bootcount_ext.o +obj-$(CONFIG_BOOTCOUNT_FS) += bootcount_fs.o obj-$(CONFIG_BOOTCOUNT_AM33XX_NVMEM) += bootcount_nvmem.o
obj-$(CONFIG_DM_BOOTCOUNT) += bootcount-uclass.o diff --git a/drivers/bootcount/bootcount_ext.c b/drivers/bootcount/bootcount_fs.c similarity index 81% rename from drivers/bootcount/bootcount_ext.c rename to drivers/bootcount/bootcount_fs.c index 9639e638e9..569592d8aa 100644 --- a/drivers/bootcount/bootcount_ext.c +++ b/drivers/bootcount/bootcount_fs.c @@ -25,8 +25,8 @@ void bootcount_store(ulong a) loff_t len; int ret;
- if (fs_set_blk_dev(CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE, - CONFIG_SYS_BOOTCOUNT_EXT_DEVPART, FS_TYPE_EXT)) { + if (fs_set_blk_dev(CONFIG_SYS_BOOTCOUNT_FS_INTERFACE, + CONFIG_SYS_BOOTCOUNT_FS_DEVPART, FS_TYPE_ANY)) { puts("Error selecting device\n"); return; } @@ -42,7 +42,7 @@ void bootcount_store(ulong a) buf->upgrade_available = upgrade_available; unmap_sysmem(buf);
- ret = fs_write(CONFIG_SYS_BOOTCOUNT_EXT_NAME, + ret = fs_write(CONFIG_SYS_BOOTCOUNT_FS_NAME, CONFIG_SYS_BOOTCOUNT_ADDR, 0, sizeof(bootcount_ext_t), &len); if (ret != 0) @@ -55,13 +55,13 @@ ulong bootcount_load(void) loff_t len_read; int ret;
- if (fs_set_blk_dev(CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE, - CONFIG_SYS_BOOTCOUNT_EXT_DEVPART, FS_TYPE_EXT)) { + if (fs_set_blk_dev(CONFIG_SYS_BOOTCOUNT_FS_INTERFACE, + CONFIG_SYS_BOOTCOUNT_FS_DEVPART, FS_TYPE_ANY)) { puts("Error selecting device\n"); return 0; }
- ret = fs_read(CONFIG_SYS_BOOTCOUNT_EXT_NAME, CONFIG_SYS_BOOTCOUNT_ADDR, + ret = fs_read(CONFIG_SYS_BOOTCOUNT_FS_NAME, CONFIG_SYS_BOOTCOUNT_ADDR, 0, sizeof(bootcount_ext_t), &len_read); if (ret != 0 || len_read != sizeof(bootcount_ext_t)) { puts("Error loading bootcount\n");