GPMC controller is common IP to interface with both NAND and NOR flash devices. Also, it supports max 8 chip-selects, which can be independently connected to any of the devices. But ROM code expects the boot-device to be connected to only chip-select[0]. Thus to resolve conflict between NOR and NAND boot. This patch: - combines NOR and NAND configs spread in board files to common gpmc_init() - configures GPMC based on boot-mode selected for SPL boot.
Signed-off-by: Pekon Gupta pekon@ti.com --- arch/arm/cpu/armv7/am33xx/mem.c | 48 +++++++++++++++++----------------- arch/arm/include/asm/arch-am33xx/mem.h | 5 ---- board/ti/am335x/board.c | 12 --------- 3 files changed, 24 insertions(+), 41 deletions(-)
diff --git a/arch/arm/cpu/armv7/am33xx/mem.c b/arch/arm/cpu/armv7/am33xx/mem.c index b6eb466..22ab25b 100644 --- a/arch/arm/cpu/armv7/am33xx/mem.c +++ b/arch/arm/cpu/armv7/am33xx/mem.c @@ -22,17 +22,6 @@
struct gpmc *gpmc_cfg;
-#if defined(CONFIG_CMD_NAND) -static const u32 gpmc_m_nand[GPMC_MAX_REG] = { - M_NAND_GPMC_CONFIG1, - M_NAND_GPMC_CONFIG2, - M_NAND_GPMC_CONFIG3, - M_NAND_GPMC_CONFIG4, - M_NAND_GPMC_CONFIG5, - M_NAND_GPMC_CONFIG6, 0 -}; -#endif -
void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, u32 size) @@ -61,11 +50,28 @@ void gpmc_init(void) { /* putting a blanket check on GPMC based on ZeBu for now */ gpmc_cfg = (struct gpmc *)GPMC_BASE; - -#ifdef CONFIG_CMD_NAND - const u32 *gpmc_config = NULL; - u32 base = 0; - u32 size = 0; +#if defined(CONFIG_NOR) + const u32 gpmc_regs[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1, + STNOR_GPMC_CONFIG2, + STNOR_GPMC_CONFIG3, + STNOR_GPMC_CONFIG4, + STNOR_GPMC_CONFIG5, + STNOR_GPMC_CONFIG6, + STNOR_GPMC_CONFIG7 + }; + u32 size = GPMC_SIZE_16M; + u32 base = CONFIG_SYS_FLASH_BASE; +#elif defined(CONFIG_NAND) +static const u32 gpmc_regs[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG1, + M_NAND_GPMC_CONFIG2, + M_NAND_GPMC_CONFIG3, + M_NAND_GPMC_CONFIG4, + M_NAND_GPMC_CONFIG5, + M_NAND_GPMC_CONFIG6, + 0 + }; + u32 size = GPMC_SIZE_256M; + u32 base = CONFIG_SYS_NAND_BASE; #endif /* global settings */ writel(0x00000008, &gpmc_cfg->sysconfig); @@ -81,12 +87,6 @@ void gpmc_init(void) */ writel(0, &gpmc_cfg->cs[0].config7); sdelay(1000); - -#ifdef CONFIG_CMD_NAND - gpmc_config = gpmc_m_nand; - - base = PISMO1_NAND_BASE; - size = PISMO1_NAND_SIZE; - enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); -#endif + /* enable chip-select specific configurations */ + enable_gpmc_cs_config(gpmc_regs, &gpmc_cfg->cs[0], base, size); } diff --git a/arch/arm/include/asm/arch-am33xx/mem.h b/arch/arm/include/asm/arch-am33xx/mem.h index 983ea28..e7e8c58 100644 --- a/arch/arm/include/asm/arch-am33xx/mem.h +++ b/arch/arm/include/asm/arch-am33xx/mem.h @@ -68,9 +68,4 @@ #define PISMO2_NAND_CS0 7 #define PISMO2_NAND_CS1 8
-/* make it readable for the gpmc_init */ -#define PISMO1_NOR_BASE FLASH_BASE -#define PISMO1_NAND_BASE CONFIG_SYS_NAND_BASE -#define PISMO1_NAND_SIZE GPMC_SIZE_256M - #endif /* endif _MEM_H_ */ diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index cc04426..49d8fc9 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -333,22 +333,10 @@ void sdram_init(void) */ int board_init(void) { -#ifdef CONFIG_NOR - const u32 gpmc_nor[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1, - STNOR_GPMC_CONFIG2, STNOR_GPMC_CONFIG3, STNOR_GPMC_CONFIG4, - STNOR_GPMC_CONFIG5, STNOR_GPMC_CONFIG6, STNOR_GPMC_CONFIG7 }; -#endif - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
gpmc_init();
-#ifdef CONFIG_NOR - /* Reconfigure CS0 for NOR instead of NAND. */ - enable_gpmc_cs_config(gpmc_nor, &gpmc_cfg->cs[0], - CONFIG_SYS_FLASH_BASE, GPMC_SIZE_16M); -#endif - return 0; }