Now when loadx and loady commands could be aborted / cancelled by CTRL+C, allow to configure timeout for initial x/y-modem packet via env variable $loadxy_timeout and by default use value from new compile-time config option CONFIG_CMD_LOADXY_TIMEOUT. Value is in seconds and zero value means infinite timeout. Default value is 90s which is the value used before this change for loadx command.
Other load commands loadb and loads already waits infinitely. Same behavior for loadx and loady commands can be achieved by setting $loadxy_timeout or CONFIG_CMD_LOADXY_TIMEOUT to 0.
Signed-off-by: Pali Rohár pali@kernel.org
--- Changes in v3: * Guard env_get via #ifdef (same what was used for d64a8fd0a902 "hwconfig: Allow to compile it without env support")
Changes in v2: * Do not remove MVEBU_TEST_PIN_LATCH_N and MVEBU_XTAL_MODE_MASK macros --- cmd/Kconfig | 7 +++++++ common/xyzModem.c | 40 ++++++++++++++++++++++++++++++++++++++-- 2 files changed, 45 insertions(+), 2 deletions(-)
diff --git a/cmd/Kconfig b/cmd/Kconfig index 211ebe9c8783..54af3769a673 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1194,6 +1194,13 @@ config CMD_LOADS help Load an S-Record file over serial line
+config CMD_LOADXY_TIMEOUT + int "loadxy_timeout" + range 0 2000 + default 90 + help + Initial timeout for loadx and loady commands. Zero means infinity. + config CMD_LSBLK depends on BLK bool "lsblk - list block drivers and devices" diff --git a/common/xyzModem.c b/common/xyzModem.c index ece25acb183b..a68d3929024b 100644 --- a/common/xyzModem.c +++ b/common/xyzModem.c @@ -26,6 +26,7 @@ #include <stdarg.h> #include <u-boot/crc.h> #include <watchdog.h> +#include <env.h>
/* Assumption - run xyzModem protocol over the console port */
@@ -50,6 +51,8 @@ static struct int len, mode, total_retries; int total_SOH, total_STX, total_CAN; bool crc_mode, at_eof, tx_ack; + bool first_xmodem_packet; + ulong initial_time, timeout; unsigned long file_length, read_length; } xyz;
@@ -409,6 +412,19 @@ xyzModem_get_hdr (void) return 0; }
+static +ulong +xyzModem_get_initial_timeout (void) +{ + /* timeout is in seconds, non-positive timeout value is infinity */ +#if CONFIG_IS_ENABLED(ENV_SUPPORT) + const char *timeout_str = env_get("loadxy_timeout"); + if (timeout_str) + return 1000 * simple_strtol(timeout_str, NULL, 10); +#endif + return 1000 * CONFIG_CMD_LOADXY_TIMEOUT; +} + int xyzModem_stream_open (connection_info_t * info, int *err) { @@ -439,18 +455,28 @@ xyzModem_stream_open (connection_info_t * info, int *err) xyz.total_CAN = 0; xyz.read_length = 0; xyz.file_length = 0; + xyz.first_xmodem_packet = false; + xyz.initial_time = get_timer(0); + xyz.timeout = xyzModem_get_initial_timeout();
CYGACC_COMM_IF_PUTC (*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
if (xyz.mode == xyzModem_xmodem) { /* X-modem doesn't have an information header - exit here */ + xyz.first_xmodem_packet = true; xyz.next_blk = 1; return 0; }
- while (retries-- > 0) + while (!(xyz.timeout && get_timer(xyz.initial_time) > xyz.timeout)) { + if (--retries <= 0) + { + retries = xyzModem_MAX_RETRIES; + crc_retries = xyzModem_MAX_RETRIES_WITH_CRC; + xyz.crc_mode = true; + } stat = xyzModem_get_hdr (); if (stat == 0) { @@ -503,9 +529,19 @@ xyzModem_stream_read (char *buf, int size, int *err) retries = xyzModem_MAX_RETRIES; while (retries-- > 0) { + if (xyz.first_xmodem_packet && xyz.timeout && + get_timer(xyz.initial_time) > xyz.timeout) + { + *err = xyzModem_timeout; + xyz.len = -1; + return total; + } + stat = xyzModem_get_hdr (); if (stat == 0) { + if (xyz.mode == xyzModem_xmodem && xyz.first_xmodem_packet) + xyz.first_xmodem_packet = false; if (xyz.blk == xyz.next_blk) { xyz.tx_ack = true; @@ -583,7 +619,7 @@ xyzModem_stream_read (char *buf, int size, int *err) xyz.total_retries++; ZM_DEBUG (zm_dprintf ("NAK (%d)\n", __LINE__)); } - if (stat < 0) + if (stat < 0 && (!xyz.first_xmodem_packet || stat != xyzModem_timeout)) { *err = stat; xyz.len = -1;