Re: [PATCH v2] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm

Hi Fabio,

Hi Lukasz,

On Mon, Aug 5, 2024 at 5:42 AM Lukasz Majewski lukma@denx.de wrote:

...

•   "update_offset=0x42\0" \
  

•   "update_filename=flash.bin\0" \
  

•   "hostname=/srv/tftp/\0" \
  

•   "update_bootimg="
  

  \

•           "mmc dev ${mmcdev} ; "          \
  

•           "if dhcp ${loadaddr} ${hostname}/${update_filename}
  

; then " \

•           "setexpr fw_sz ${filesize} / 0x200 ; "  /* SD block
  

size */ \

•           "setexpr fw_sz ${fw_sz} + 1 ; "  
  

As Benjamin pointed out earlier this increment by one is not necessary.

All other i.MX8M docs don't have this increment.

So apparently the BSP build scripts in OE/Yocto take always care to have 0x200 aligned binaries (imx-boot and flash.bin).

OK, I will remove it.

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de