Hi B
I would like to mention that I run U-boot either via the code located in flash(using at91bootstrap) or directly in the DDRAM via Eclipse/GDB/JTAG(Jflash).
Thanks
Marcio
On Thu, 14 Mar 2013 19:31:39 -0700 (PDT), Bo Shen-3 [via U-Boot] wrote:
Hi Marcio,
On 3/14/2013 20:23, [hidden email] wrote:
Hi Bo Shen
I
have used a SAMBA old version and I managed to write
the Linux
Kernel that can be recognized by U-boot but now it sends a
message
"Veritying Checksum ....: Bad Data CRC. It seems that U-Boot is
only
reading the first sector OK and the rest of the Kernel is being
worngly read.
Bad Data CRC don't help. Because, many possible
issue will cause this issue.
Consider you use 16bit NAND flash.
Have you define
CONFIG_SYS_NAND_DBW_16 in board configuration header?
BTW, which bootstrap version do you use? (As I suspect the
bootstrap has
enabled for supporting 16bit NAND, so it read u-boot
OK)
Please provide the log information output from dbgu.
Thanks for your attention
Marcio
Best Regards, Bo
Shen
U-Boot
mailing list
[hidden email]
http://lists.denx.de/mailman/listinfo/u-boot [1]
-------------------------
If you reply to this email, your message
will be added to the discussion below: http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-aft... [2]
To unsubscribe from AT91SAM9M10 Custom Board U-boot reboot after
Wrong Image Format, click here [3].
NAML [4]
Links: ------ [1] http://lists.denx.de/mailman/listinfo/u-boot [2] http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-aft... [3] http://u-boot.10912.n7.nabble.com/template/NamlServlet.jtp?macro=unsubscribe... [4] http://u-boot.10912.n7.nabble.com/template/NamlServlet.jtp?macro=macro_viewe...
-- View this message in context: http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-aft... Sent from the U-Boot mailing list archive at Nabble.com.