Currently DFU is not working.
Adjust CONFIG_SYS_MALLOC_LEN and dfu_alt_info so that we are able to flash u-boot.imx into the eMMC via dfu using the following method:
=> dfu 0 mmc 0
In the host PC:
dfu-util -D u-boot.imx -a boot
This is the same approach done in the mx6sl warp board.
Signed-off-by: Fabio Estevam fabio.estevam@nxp.com --- include/configs/warp7.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/include/configs/warp7.h b/include/configs/warp7.h index 4dfcd28..b57065b 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -17,7 +17,7 @@ #define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) +#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M)
#define CONFIG_BOARD_EARLY_INIT_F
@@ -28,10 +28,7 @@ #define CONFIG_SYS_MMC_IMG_LOAD_PART 1
#define CONFIG_DFU_ENV_SETTINGS \ - "dfu_alt_info=image raw 0 0x800000;"\ - "u-boot raw 0 0x4000;"\ - "bootimg part 0 1;"\ - "rootfs part 0 2\0" \ + "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
#define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_DFU_ENV_SETTINGS \