On 04/21/2016 03:17 PM, Heiko Schocher wrote:
Hello Marek,
Am 21.04.2016 um 14:51 schrieb Marek Vasut:
On 04/21/2016 02:48 PM, Heiko Schocher wrote:
suppress a lot of "reg or ranges property, but no unit name" warnings, through the dtc compiler flag "-Wno-unit_address_vs_reg".
If all DTS are fixed, we can remove this flag again.
Signed-off-by: Heiko Schocher hs@denx.de
There is also a solution to suppress warnings from the dtc compiler by the "-q" flag, but that would suppress all warnings. Not realy what I want.
Yep
With this patch and patch: http://patchwork.ozlabs.org/patch/609150/
travis build passes, see: https://travis-ci.org/hsdenx/u-boot/builds/124723016
arch/arc/dts/Makefile | 2 ++ arch/arm/dts/Makefile | 3 ++- arch/microblaze/dts/Makefile | 2 ++ arch/mips/dts/Makefile | 3 ++- arch/nios2/dts/Makefile | 2 ++ arch/powerpc/dts/Makefile | 2 ++ arch/sandbox/dts/Makefile | 2 ++ arch/x86/dts/Makefile | 2 ++ 8 files changed, 16 insertions(+), 2 deletions(-)
Isn't there some common place in scripts/ or so where we can disable this warning using an one-liner ?
I don;t know ... but I prefer to disable this per arch .. so we can enable the check back if one arch is fixed ...
In my opinion, we should stick to the same behavior Linux does. Ccing a few more people.