After this change it would be possible to boot SDP gadget when Phytec's Phycore imx8mm module has USB ROM boot selected.
With this change it shall be possible to flash eMMC/SD card content with uuu program.
Signed-off-by: Lukasz Majewski lukma@denx.de --- configs/phycore-imx8mm_defconfig | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig index 6748e6fafb..beb2f1e9f0 100644 --- a/configs/phycore-imx8mm_defconfig +++ b/configs/phycore-imx8mm_defconfig @@ -25,6 +25,7 @@ CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0x3E0000 CONFIG_SYS_LOAD_ADDR=0x40480000 CONFIG_PCI=y +# CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_SPL_LOAD_FIT=y @@ -57,6 +58,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_SYS_EEPROM_SIZE=4096 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 +# CONFIG_CMD_BIND is not set CONFIG_CMD_CLK=y CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y @@ -86,6 +88,10 @@ CONFIG_SPL_CLK_COMPOSITE_CCF=y CONFIG_CLK_COMPOSITE_CCF=y CONFIG_SPL_CLK_IMX8MM=y CONFIG_CLK_IMX8MM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x42800000 +CONFIG_FASTBOOT_BUF_SIZE=0x20000000 +CONFIG_FASTBOOT_UUU_SUPPORT=y CONFIG_MXC_GPIO=y CONFIG_DM_I2C=y CONFIG_MISC=y @@ -116,7 +122,6 @@ CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_NVME_PCI=y CONFIG_PCIE_DW_IMX=y -CONFIG_PHY=y CONFIG_PHY_IMX8M_PCIE=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y @@ -136,4 +141,15 @@ CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y CONFIG_IMX_TMU=y +CONFIG_USB=y +CONFIG_SPL_USB_HOST=y +CONFIG_USB_EHCI_HCD=y +CONFIG_MXC_USB_OTG_HACTIVE=y +CONFIG_USB_GADGET=y +CONFIG_SPL_USB_GADGET=y +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_CI_UDC=y +CONFIG_SDP_LOADADDR=0x40400000 +CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_IMX_WATCHDOG=y